[alsa-devel] [Fwd: HP DV4 1155 SE - No Sound through speakers...]

Takashi Iwai tiwai at suse.de
Mon Feb 2 19:52:31 CET 2009


At Mon, 2 Feb 2009 16:20:50 -0200,
Herton Ronaldo Krzesinski wrote:
> 
> Em Sábado 31 Janeiro 2009, às 05:52:19, Jean-Pierre André escreveu:
> > 
> > Hi,
> > 
> > > Hi all, I have an HP DV4 1155-SE, I've been unable to get sound working
> > > through the speakers, although it does work through the headhpones. I ran
> > > alsa-.upgrade which downloaded compiled, and installed 1.0.19 - still no
> > > luck.
> > >   
> > 
> > I have the same IDT codec 92HD71B7X on another
> > HP DV4 model, and I have tracked the problem to be
> > the kernel configuring IRQ 22 through the APIC, but
> > interrupts triggerring IRQ 20 (on kernel 2.6.27 and
> > alsa 1.0.19). It would be interesting if you could
> > confirm this by analyzing /proc/interrupts.
> > 
> > The workarounds I know of are :
> > - adding irqpoll to the boot options,
> > - or adding noapic to the boot options,
> > - using mplayer to play music.
> > 
> > There are with option "snd-hda-intel model=hp-m4"
> > (this option is for HP DV5/DV7, but HP DV4
> > is probably different)
> > 
> > I have not enough knowledge to tell where the problem
> > lies : kernel, apic, alsa.
> 
> It looks like some of these HP laptops have some sort of IRQ issue indeed, to 
> me it was reported that enabling pci MSI (both system wide and with 
> enable_msi=1 given to snd-hda-intel) cured issues in some cases, along with 
> some changes to sigmatel codec handling code in snd-hda-intel
> 
> I have a ticked opened where people started to complain about sound issues 
> with hda-intel+sigmatel codec starting with alsa 1.0.18rc3 (sorry, it's a 
> great mess, type of the ticket everyone says sound doesn't work and report in, 
> but where I tried to filter some things out): 
> https://qa.mandriva.com/show_bug.cgi?id=44855
> Also some reports are hard to understand sometimes.
> With alsa 1.0.18 final in 2.6.27 (or 2.6.28) many issues related on the ticket 
> were fixed, but issues with HP laptops remained.
> 
> I don't have any of affected HP laptops for test, but based on sigmatel 
> datasheets, reports of users and pin cfgs used in .ini files of sigmatel 
> windows drivers I made some changes to sigmatel code, plus added patch to set 
> enable_msi. The only issue I have with the changes, and that's why I didn't 
> submit yet, is that I should have split them, don't know if everything is 
> really required, and ask here to clarify some things below; also the changes 
> are outdated compared to current sound git tree.
> 
> I'm attaching here the changes, they were made against kernel 2.6.28.2
> - One patch deals with the sigmatel codec code, some things to note (others 
> are cited on the patch):
> * despite being almost the same, only with some models missing widgets/pins, I 
> splitted support from patch_stac92hd71bxx for idt 92HD71B5X (4 port), 
> 92HD75B1/2 (5 port). Mostly because of different number of pins between them, 
> may be could have still hacked more stac92xx_set_config_regs to avoid this.

That'll be OK if this makes the code more readable...


> * Many people complained about the Analog Loopback, causing problems when it's 
> enabled; I really don't know what exactly this is supposed to do (is it just a 
> mute of outputs or something like is described here?: 
> http://people.atrpms.net/~pcavalcanti/alsa-1.0.15rc2_snd-hda-intel.html) and 
> all sigmatel datasheets I look don't mention it, in the patch I removed it.

The "Analog Loopback" control is supposed to switch between the PCM
and analog input loopback.  If it's on, you don't hear any sounds from
PCM.  So, if you know that, you'll understand why it doesn't work.

Well, I personally don't find that control so useful (and it's not
intuitive), so I'm not against the removal, but would like to hear
opinions from others.


> * power management on pins (stac92hd71bxx_pwr_nids) are not listed on sigmatel 
> datasheets I dowloaded from idt site (for STAC92HD71Bx and STAC92HD75Bx), so I 
> removed its setting (or I'm missing something here...).

This seems like an undocumented feature, but a similar feature is
documented in other codecs, IIRC.
I feel this a nice feature (if it really works).  So, I'd like to keep
this feature.

Anyway, yes, splitting these would be really helpful, so that we can
check which is broken / annoying to remove.


> - The other patch adds a quirk list to force enable_msi=1. PCI_MSI must be 
> enabled to give results.

This is a bit to consider, but from the fact that MSI itself is a good
thing, a white-list would be OK.



thanks,

Takashi


> > Regards
> > 
> > Jean-Pierre
> > 
> > 
> > > I ran alsa-info, output here:
> > > http://www.alsa-project.org/db/?f=844b7ee6468067460e17b7fc694e49052072a26f
> > >
> > > I filed a bug, here:
> > > https://bugtrack.alsa-project.org/alsa-bug/view.php?id=4374
> > >
> > > Any ideas?
> > >   
> 
> --
> []'s
> Herton
> [2 sound-alsa-hda-enhance_fix_stac92hd71bx_stac92hd75bx.patch <text/x-patch; UTF-8 (7bit)>]
> Enhance/fix some aspects related to STAC92HD71Bx and STAC92HD75Bx support:
> * Split STAC92HD71B* support from one model to three models (4 port, 5 port,
>   6 port), because of different number of default pins. May be trying to change
>   stac92xx_set_config_regs to check for pin_nids set to 0 for example would be
>   better (and requiring to check anything else that uses pin_nids array),
>   instead of splitting models just because of different number of pins
>   supported.
> * Add additional init verbs for all STAC92HD71Bx and STAC92HD75Bx models to
>   ensure widgets are properly connected and configured, and also remove invalid
>   reference to 0xf pin for model without analog mixer (don't have the pin).
> * Removed analog loopback mixer items, not mentioned in sigmatel datasheets and
>   reported to break sound support.
> * Add support to stac92xx_set_config_regs to skip write to pin cfg if pin cfg
>   array item is zero.
> * Add new stac92hd71bxx hp-m* models, with pci quirks for known machines, pin
>   cfgs sources comes from *.ini files from sigmatel windows drivers provided by
>   HP.
> * Detect dynamically looking at pin configs the number of connected ports and
>   number of smuxes using new introduced functions stac92hd71bxx_connected_ports
>   and stac92hd71bxx_connected_smuxes.
> * Use proper input mux configuration for 4port and 5port models.
> * Set eapd_mask and eapd_switch, looks to be required.
> * Remove pwr_nids/num_pwrs>0 etc. setting for all STAC92HD71Bx and STAC92HD75Bx
>   models, datasheets shows no power management support on any pins. Also
>   stac92xx_parse_auto_config was using uneeded/wrong third parameter = 0x23.
> 
> Signed-off-by: Herton Ronaldo Krzesinski <herton at mandriva.com.br>
> 
> ---
>  Documentation/sound/alsa/ALSA-Configuration.txt |   14
>  sound/pci/hda/patch_sigmatel.c                  |  620 +++++++++++++++++++-----
>  2 files changed, 516 insertions(+), 118 deletions(-)
> 
> diff -p -up linux-2.6.28/Documentation/sound/alsa/ALSA-Configuration.txt.orig linux-2.6.28/Documentation/sound/alsa/ALSA-Configuration.txt
> --- linux-2.6.28/Documentation/sound/alsa/ALSA-Configuration.txt.orig	2009-01-28 07:38:38.000000000 -0500
> +++ linux-2.6.28/Documentation/sound/alsa/ALSA-Configuration.txt	2009-01-28 07:40:30.000000000 -0500
> @@ -1070,11 +1070,23 @@ Prior to version 0.9.0rc4 options had a 
>  	  dell-3stack	Dell Dimension E520
>  	  dell-bios	Fixes with Dell BIOS setup
>  
> -	STAC92HD71B*
> +	STAC92HD71B5 (4 port)
> +	  ref		Reference board
> +
> +	STAC92HD75B[12] (5 port)
> +	  ref		Reference board
> +	  hp-m4		HP laptops
> +
> +	STAC92HD71B[678]/STAC92HD75B[34] (6 port)
>  	  ref		Reference board
>  	  dell-m4-1	Dell desktops
>  	  dell-m4-2	Dell desktops
>  	  dell-m4-3	Dell desktops
> +	  hp-m4-1	HP laptops
> +	  hp-m4-2	HP laptops
> +	  hp-m4-3	HP laptops
> +	  hp-m4-4	HP laptops
> +	  hp-m4-5	HP laptops
>  
>  	STAC92HD73*
>  	  ref		Reference board
> diff -p -up linux-2.6.28/sound/pci/hda/patch_sigmatel.c.orig linux-2.6.28/sound/pci/hda/patch_sigmatel.c
> --- linux-2.6.28/sound/pci/hda/patch_sigmatel.c.orig	2009-01-28 07:39:54.000000000 -0500
> +++ linux-2.6.28/sound/pci/hda/patch_sigmatel.c	2009-01-28 07:40:30.000000000 -0500
> @@ -84,12 +84,26 @@ enum {
>  };
>  
>  enum {
> +	STAC_92HD71B5_REF,
> +	STAC_92HD71B5_MODELS
> +};
> +
> +enum {
> +	STAC_92HD75B_5PORT_REF,
> +	STAC_HP_M4,
> +	STAC_92HD75B_5PORT_MODELS
> +};
> +
> +enum {
>  	STAC_92HD71BXX_REF,
>  	STAC_DELL_M4_1,
>  	STAC_DELL_M4_2,
>  	STAC_DELL_M4_3,
> -	STAC_HP_M4,
> -	STAC_HP_DV5,
> +	STAC_HP_M4_1,
> +	STAC_HP_M4_2,
> +	STAC_HP_M4_3,
> +	STAC_HP_M4_4,
> +	STAC_HP_M4_5,
>  	STAC_92HD71BXX_MODELS
>  };
>  
> @@ -320,10 +334,6 @@ static unsigned int stac92hd83xxx_pwr_ma
>  	0x03, 0x0c, 0x10, 0x40,
>  };
>  
> -static hda_nid_t stac92hd71bxx_pwr_nids[3] = {
> -	0x0a, 0x0d, 0x0f
> -};
> -
>  static hda_nid_t stac92hd71bxx_adc_nids[2] = {
>  	0x12, 0x13,
>  };
> @@ -344,6 +354,11 @@ static hda_nid_t stac92hd71bxx_dac_nids[
>  	0x10, /*0x11, */
>  };
>  
> +#define STAC92HD75B_5PORT_NUM_DMICS 1
> +static hda_nid_t stac92hd75b_5port_dmic_nids[STAC92HD75B_5PORT_NUM_DMICS + 1] = {
> +	0x18, 0
> +};
> +
>  #define STAC92HD71BXX_NUM_DMICS	2
>  static hda_nid_t stac92hd71bxx_dmic_nids[STAC92HD71BXX_NUM_DMICS + 1] = {
>  	0x18, 0x19, 0
> @@ -459,10 +474,22 @@ static hda_nid_t stac92hd83xxx_pin_nids[
>  	0x0f, 0x10, 0x11, 0x12, 0x13,
>  	0x1d, 0x1e, 0x1f, 0x20
>  };
> -static hda_nid_t stac92hd71bxx_pin_nids[11] = {
> +
> +static hda_nid_t stac92hd71b5_pin_nids[11] = {
> +	0x0a, 0x0b, 0x0c, 0x0d, 0x14,
> +	0x18, 0x19, 0x1e, 0x1f, 0x20,
> +	0x27
> +};
> +
> +static hda_nid_t stac92hd75b_5port_pin_nids[10] = {
> +	0x0a, 0x0b, 0x0c, 0x0d, 0x0e,
> +	0x14, 0x18, 0x1e, 0x1f, 0x20
> +};
> +
> +static hda_nid_t stac92hd71bxx_pin_nids[13] = {
>  	0x0a, 0x0b, 0x0c, 0x0d, 0x0e,
>  	0x0f, 0x14, 0x18, 0x19, 0x1e,
> -	0x1f,
> +	0x1f, 0x20, 0x27
>  };
>  
>  static hda_nid_t stac927x_pin_nids[14] = {
> @@ -868,10 +895,15 @@ static struct hda_verb stac92hd71bxx_cor
>  	{ 0x28, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0xff},
>  	/* connect headphone jack to dac1 */
>  	{ 0x0a, AC_VERB_SET_CONNECT_SEL, 0x01},
> -	/* unmute right and left channels for nodes 0x0a, 0xd, 0x0f */
> +	/* connect port D/mono out to dac0 */
> +	{ 0x0d, AC_VERB_SET_CONNECT_SEL, 0x00},
> +	{ 0x15, AC_VERB_SET_CONNECT_SEL, 0x00},
> +	/* make sure dmuxes are initially connected to analog muxes */
> +	{ 0x1c, AC_VERB_SET_CONNECT_SEL, 0x00},
> +	{ 0x1d, AC_VERB_SET_CONNECT_SEL, 0x00},
> +	/* unmute right and left channels for nodes 0x0a, 0xd */
>  	{ 0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
>  	{ 0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
> -	{ 0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
>  	{}
>  };
>  
> @@ -889,6 +921,12 @@ static struct hda_verb stac92hd71bxx_ana
>  	{ 0x28, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0xff},
>  	/* connect headphone jack to dac1 */
>  	{ 0x0a, AC_VERB_SET_CONNECT_SEL, 0x01},
> +	/* connect port D/mono out to dac0 */
> +	{ 0x0d, AC_VERB_SET_CONNECT_SEL, 0x00},
> +	{ 0x15, AC_VERB_SET_CONNECT_SEL, 0x00},
> +	/* unmute and max step for dac0/dac1 inputs in mixer */
> +	{ 0x17, AC_VERB_SET_AMP_GAIN_MUTE, 0x701f},
> +	{ 0x17, AC_VERB_SET_AMP_GAIN_MUTE, 0x711f},
>  	/* unmute right and left channels for nodes 0x0a, 0xd */
>  	{ 0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
>  	{ 0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
> @@ -1109,7 +1147,6 @@ static struct snd_kcontrol_new stac92hd8
>  
>  static struct snd_kcontrol_new stac92hd71bxx_analog_mixer[] = {
>  	STAC_INPUT_SOURCE(2),
> -	STAC_ANALOG_LOOPBACK(0xFA0, 0x7A0, 2),
>  
>  	HDA_CODEC_VOLUME_IDX("Capture Volume", 0x0, 0x1c, 0x0, HDA_OUTPUT),
>  	HDA_CODEC_MUTE_IDX("Capture Switch", 0x0, 0x1c, 0x0, HDA_OUTPUT),
> @@ -1138,7 +1175,6 @@ static struct snd_kcontrol_new stac92hd7
>  
>  static struct snd_kcontrol_new stac92hd71bxx_mixer[] = {
>  	STAC_INPUT_SOURCE(2),
> -	STAC_ANALOG_LOOPBACK(0xFA0, 0x7A0, 2),
>  
>  	HDA_CODEC_VOLUME_IDX("Capture Volume", 0x0, 0x1c, 0x0, HDA_OUTPUT),
>  	HDA_CODEC_MUTE_IDX("Capture Switch", 0x0, 0x1c, 0x0, HDA_OUTPUT),
> @@ -1673,28 +1709,107 @@ static struct snd_pci_quirk stac92hd83xx
>  	{} /* terminator */
>  };
>  
> -static unsigned int ref92hd71bxx_pin_configs[11] = {
> +static unsigned int ref92hd71b5_pin_configs[] = {
> +	0x02214030, 0x02a19040, 0x01a19020, 0x01014010,
> +	0x40f000f0, 0x40f000f0, 0x40f000f0, 0x01452050,
> +	0x98560060, 0x40f000f0, 0x40f000f0,
> +};
> +
> +static unsigned int *stac92hd71b5_brd_tbl[STAC_92HD71B5_MODELS] = {
> +	[STAC_92HD71B5_REF] = ref92hd71b5_pin_configs,
> +};
> +
> +static const char *stac92hd71b5_models[STAC_92HD71B5_MODELS] = {
> +	[STAC_92HD71B5_REF] = "ref",
> +};
> +
> +static struct snd_pci_quirk stac92hd71b5_cfg_tbl[] = {
> +	{} /* terminator */
> +};
> +
> +static unsigned int ref92hd75b_5port_pin_configs[] = {
> +	0x02214030, 0x02a19040, 0x01a19020, 0x01014010,
> +	0x40f000f0, 0x40f000f0, 0x40f000f0, 0x01452050,
> +	0x98560060, 0x40f000f0,
> +};
> +
> +static unsigned int *stac92hd75b_5port_brd_tbl[STAC_92HD75B_5PORT_MODELS] = {
> +	[STAC_92HD75B_5PORT_REF]	= ref92hd75b_5port_pin_configs,
> +	[STAC_HP_M4]			= NULL,
> +};
> +
> +static const char *stac92hd75b_5port_models[STAC_92HD75B_5PORT_MODELS] = {
> +	[STAC_92HD75B_5PORT_REF] = "ref",
> +	[STAC_HP_M4]		 = "hp-m4",
> +};
> +
> +static struct snd_pci_quirk stac92hd75b_5port_cfg_tbl[] = {
> +	SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x361a,
> +				"unknown HP", STAC_HP_M4),
> +	{} /* terminator */
> +};
> +
> +static unsigned int ref92hd71bxx_pin_configs[13] = {
>  	0x02214030, 0x02a19040, 0x01a19020, 0x01014010,
>  	0x0181302e, 0x01014010, 0x01019020, 0x90a000f0,
> -	0x90a000f0, 0x01452050, 0x01452050,
> +	0x90a000f0, 0x01452050, 0x01452050, 0x00000000,
> +	0x00000000,
>  };
>  
> -static unsigned int dell_m4_1_pin_configs[11] = {
> +static unsigned int dell_m4_1_pin_configs[13] = {
>  	0x0421101f, 0x04a11221, 0x40f000f0, 0x90170110,
>  	0x23a1902e, 0x23014250, 0x40f000f0, 0x90a000f0,
> -	0x40f000f0, 0x4f0000f0, 0x4f0000f0,
> +	0x40f000f0, 0x4f0000f0, 0x4f0000f0, 0x00000000,
> +	0x00000000,
>  };
>  
> -static unsigned int dell_m4_2_pin_configs[11] = {
> +static unsigned int dell_m4_2_pin_configs[13] = {
>  	0x0421101f, 0x04a11221, 0x90a70330, 0x90170110,
>  	0x23a1902e, 0x23014250, 0x40f000f0, 0x40f000f0,
> -	0x40f000f0, 0x044413b0, 0x044413b0,
> +	0x40f000f0, 0x044413b0, 0x044413b0, 0x00000000,
> +	0x00000000,
>  };
>  
> -static unsigned int dell_m4_3_pin_configs[11] = {
> +static unsigned int dell_m4_3_pin_configs[13] = {
>  	0x0421101f, 0x04a11221, 0x90a70330, 0x90170110,
>  	0x40f000f0, 0x40f000f0, 0x40f000f0, 0x90a000f0,
> -	0x40f000f0, 0x044413b0, 0x044413b0,
> +	0x40f000f0, 0x044413b0, 0x044413b0, 0x00000000,
> +	0x00000000,
> +};
> +
> +static unsigned int hp_m4_1_pin_configs[13] = {
> +	0x0221201f, 0x02a12050, 0x40f000f0, 0x90170010,
> +	0x40f000f1, 0x0221201f, 0x40f000f2, 0x90a60040,
> +	0x50f000f3, 0x28466060, 0x50f000f4, 0x00000000,
> +	0x90300041,
> +};
> +
> +static unsigned int hp_m4_2_pin_configs[13] = {
> +	0x0221201f, 0x02a1205e, 0x40f000f1, 0x90170010,
> +	0x4080005f, 0x40f000f5, 0x40f000f2, 0x90a60070,
> +	0x50f000f3, 0x50f000f4, 0x50f000f5, 0x28466060,
> +	0x9030005a,
> +};
> +
> +static unsigned int hp_m4_3_pin_configs[13] = {
> +	0x0221201f, 0x02a1205e, 0x40f000f1, 0x90170010,
> +	0x4080005f, 0x40f000f5, 0x40f000f2, 0x90a60070,
> +	0x50f000f3, 0x28466060, 0x50f000f4, 0x40f000f0,
> +	0x9030005a,
> +};
> +
> +static unsigned int hp_m4_4_pin_configs[13] = {
> +	0x0221201f, 0x02a12050, 0x90a70040, 0x90170010,
> +	0x40f000f1, 0x40f000f5, 0x40f000f2, 0x50f000f6,
> +	0x50f000f3, 0x50f000f7, 0x50f000f4, 0x28466060,
> +	0x9030005a,
> +};
> +
> +static unsigned int hp_m4_5_pin_configs[13] = {
> +	0x0221201f, 0x02a1205e, 0x90a70070, 0x90170010,
> +	0x4080005f, 0x40f000f5, 0x40f000f2, 0x50f000f1,
> +	0x50f000f3, 0x50f000f6, 0x50f000f4, 0x28466060,
> +	0x9030005a,
>  };
>  
>  static unsigned int *stac92hd71bxx_brd_tbl[STAC_92HD71BXX_MODELS] = {
> @@ -1702,8 +1817,11 @@ static unsigned int *stac92hd71bxx_brd_t
>  	[STAC_DELL_M4_1]	= dell_m4_1_pin_configs,
>  	[STAC_DELL_M4_2]	= dell_m4_2_pin_configs,
>  	[STAC_DELL_M4_3]	= dell_m4_3_pin_configs,
> -	[STAC_HP_M4]		= NULL,
> -	[STAC_HP_DV5]		= NULL,
> +	[STAC_HP_M4_1]		= hp_m4_1_pin_configs,
> +	[STAC_HP_M4_2]		= hp_m4_2_pin_configs,
> +	[STAC_HP_M4_3]		= hp_m4_3_pin_configs,
> +	[STAC_HP_M4_4]		= hp_m4_4_pin_configs,
> +	[STAC_HP_M4_5]		= hp_m4_5_pin_configs,
>  };
>  
>  static const char *stac92hd71bxx_models[STAC_92HD71BXX_MODELS] = {
> @@ -1711,24 +1829,59 @@ static const char *stac92hd71bxx_models[
>  	[STAC_DELL_M4_1] = "dell-m4-1",
>  	[STAC_DELL_M4_2] = "dell-m4-2",
>  	[STAC_DELL_M4_3] = "dell-m4-3",
> -	[STAC_HP_M4] = "hp-m4",
> -	[STAC_HP_DV5] = "hp-dv5",
> +	[STAC_HP_M4_1] = "hp-m4-1",
> +	[STAC_HP_M4_2] = "hp-m4-2",
> +	[STAC_HP_M4_3] = "hp-m4-3",
> +	[STAC_HP_M4_4] = "hp-m4-4",
> +	[STAC_HP_M4_5] = "hp-m4-5",
>  };
>  
>  static struct snd_pci_quirk stac92hd71bxx_cfg_tbl[] = {
>  	/* SigmaTel reference board */
>  	SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2668,
>  		      "DFI LanParty", STAC_92HD71BXX_REF),
> -	SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x30f2,
> -		      "HP dv5", STAC_HP_M4),
> +	SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x30de,
> +		      "unknown HP", STAC_HP_M4_1),
> +	SND_PCI_QUIRK(0x30de, 0x103c,
> +		      "unknown HP", STAC_HP_M4_1),
> +	SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x1505,
> +		      "unknown HP", STAC_HP_M4_1),
> +	SND_PCI_QUIRK(0x1505, 0x103c,
> +		      "unknown HP", STAC_HP_M4_1),
> +	SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x30f3,
> +		      "unknown HP", STAC_HP_M4_2),
>  	SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x30f4,
> -		      "HP dv7", STAC_HP_M4),
> +		      "HP dv7", STAC_HP_M4_2),
> +	SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x30f7,
> +		      "unknown HP", STAC_HP_M4_2),
> +	SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x30fb,
> +		      "unknown HP", STAC_HP_M4_2),
>  	SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x30fc,
> -		      "HP dv7", STAC_HP_M4),
> +		      "unknown HP", STAC_HP_M4_2),
> +	SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x30fd,
> +		      "unknown HP", STAC_HP_M4_2),
> +	SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x30f2,
> +		      "HP dv5", STAC_HP_M4_3),
> +	SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x3600,
> +		      "unknown HP", STAC_HP_M4_3),
> +	SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x3602,
> +		      "unknown HP", STAC_HP_M4_3),
>  	SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x3603,
> -		      "HP dv5", STAC_HP_DV5),
> -	SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x361a,
> -				"unknown HP", STAC_HP_M4),
> +		      "unknown HP", STAC_HP_M4_3),
> +	SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x360f,
> +		      "unknown HP", STAC_HP_M4_3),
> +	SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x3610,
> +		      "unknown HP", STAC_HP_M4_3),
> +	SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x30ff,
> +		      "unknown HP", STAC_HP_M4_4),
> +	SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x3601,
> +		      "unknown HP", STAC_HP_M4_4),
> +	SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x3607,
> +		      "unknown HP", STAC_HP_M4_4),
> +	SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x30f8,
> +		      "unknown HP", STAC_HP_M4_5),
> +	SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x30fe,
> +		      "unknown HP", STAC_HP_M4_5),
>  	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0233,
>  				"unknown Dell", STAC_DELL_M4_1),
>  	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0234,
> @@ -2262,9 +2415,11 @@ static void stac92xx_set_config_regs(str
>   	if (!spec->pin_configs)
>   		return;
>  
> -	for (i = 0; i < spec->num_pins; i++)
> -		stac92xx_set_config_reg(codec, spec->pin_nids[i],
> -					spec->pin_configs[i]);
> +	for (i = 0; i < spec->num_pins; i++) {
> +		if (spec->pin_configs[i])
> +			stac92xx_set_config_reg(codec, spec->pin_nids[i],
> +						spec->pin_configs[i]);
> +	}
>  }
>  
>  /*
> @@ -4527,6 +4682,282 @@ static struct hda_codec_ops stac92hd71bx
>  #endif
>  };
>  
> +static int stac92hd71bxx_connected_ports(struct hda_codec *codec,
> +					 hda_nid_t *nids, int num_nids)
> +{
> +	struct sigmatel_spec *spec = codec->spec;
> +	int idx, num;
> +	unsigned int def_conf;
> +
> +	for (num = 0; num < num_nids; num++) {
> +		for (idx = 0; idx < spec->num_pins; idx++)
> +			if (spec->pin_nids[idx] == nids[num])
> +				break;
> +		if (idx >= spec->num_pins)
> +			break;
> +		def_conf = get_defcfg_connect(spec->pin_configs[idx]);
> +		if (def_conf == AC_JACK_PORT_NONE) 
> +			break;
> +	}
> +	return num;
> +}
> +
> +static int stac92hd71bxx_connected_smuxes(struct hda_codec *codec,
> +					  hda_nid_t dig0pin)
> +{
> +	struct sigmatel_spec *spec = codec->spec;
> +	int idx;
> +
> +	for (idx = 0; idx < spec->num_pins; idx++)
> +		if (spec->pin_nids[idx] == dig0pin)
> +			break;
> +	if ((idx + 2) >= spec->num_pins)
> +		return 0;
> +
> +	/* dig1pin case */
> +	if (get_defcfg_connect(spec->pin_configs[idx+1]) != AC_JACK_PORT_NONE)
> +		return 2;
> +
> +	/* dig0pin + dig2pin case */
> +	if (get_defcfg_connect(spec->pin_configs[idx+2]) != AC_JACK_PORT_NONE)
> +		return 2;
> +	if (get_defcfg_connect(spec->pin_configs[idx]) != AC_JACK_PORT_NONE)
> +		return 1;
> +	else
> +		return 0;
> +}
> +
> +static struct hda_input_mux stac92hd71b5_dmux = {
> +	.num_items = 3,
> +	.items = {
> +		{ "Analog Inputs", 0x00 },
> +		{ "Digital Mic 1", 0x02 },
> +		{ "Digital Mic 2", 0x03 },
> +	}
> +};
> +
> +static int patch_stac92hd71b5(struct hda_codec *codec)
> +{
> +	struct sigmatel_spec *spec;
> +	int err = 0;
> +
> +	spec  = kzalloc(sizeof(*spec), GFP_KERNEL);
> +	if (spec == NULL)
> +		return -ENOMEM;
> +
> +	codec->spec = spec;
> +	codec->patch_ops = stac92xx_patch_ops;
> +	spec->num_pins = ARRAY_SIZE(stac92hd71b5_pin_nids);
> +	spec->pin_nids = stac92hd71b5_pin_nids;
> +
> +	memcpy(&spec->private_dimux, &stac92hd71b5_dmux,
> +			sizeof(stac92hd71b5_dmux));
> +	spec->board_config = snd_hda_check_board_config(codec,
> +							STAC_92HD71B5_MODELS,
> +							stac92hd71b5_models,
> +							stac92hd71b5_cfg_tbl);
> +again:
> +	if (spec->board_config < 0) {
> +		snd_printdd(KERN_INFO "hda_codec: Unknown model for"
> +			" STAC92HD71B5, using BIOS defaults\n");
> +		err = stac92xx_save_bios_config_regs(codec);
> +		if (err < 0) {
> +			stac92xx_free(codec);
> +			return err;
> +		}
> +		spec->pin_configs = spec->bios_pin_configs;
> +	} else {
> +		spec->pin_configs = stac92hd71b5_brd_tbl[spec->board_config];
> +		stac92xx_set_config_regs(codec);
> +	}
> +
> +	if (spec->board_config > STAC_92HD71B5_REF) {
> +		/* GPIO0 = EAPD */
> +		spec->gpio_mask = 0x01;
> +		spec->gpio_dir = 0x01;
> +		spec->gpio_data = 0x01;
> +		spec->eapd_mask = 0x01; /* needed? */
> +		spec->eapd_switch = 1;  /* needed? */
> +	}
> +
> +	spec->mixer = stac92hd71bxx_mixer;
> +	spec->init = stac92hd71bxx_core_init;
> +	codec->slave_dig_outs = stac92hd71bxx_slave_dig_outs;
> +
> +	spec->num_pwrs = 0;
> +	spec->powerdown_adcs = 1;
> +	spec->digbeep_nid = 0x26;
> +
> +	spec->mux_nids = stac92hd71bxx_mux_nids;
> +	spec->adc_nids = stac92hd71bxx_adc_nids;
> +	spec->dmic_nids = stac92hd71bxx_dmic_nids;
> +	spec->dmux_nids = stac92hd71bxx_dmux_nids;
> +	spec->smux_nids = stac92hd71bxx_smux_nids;
> +	spec->num_muxes = ARRAY_SIZE(stac92hd71bxx_mux_nids);
> +	spec->num_adcs = ARRAY_SIZE(stac92hd71bxx_adc_nids);
> +	spec->num_dmics = stac92hd71bxx_connected_ports(codec,
> +				stac92hd71bxx_dmic_nids,
> +				STAC92HD71BXX_NUM_DMICS);
> +	if (spec->num_dmics) {
> +		spec->num_dmuxes = ARRAY_SIZE(stac92hd71bxx_dmux_nids);
> +		spec->dinput_mux = &spec->private_dimux;
> +		spec->private_dimux.num_items += spec->num_dmics -
> +			(ARRAY_SIZE(stac92hd71bxx_dmic_nids) - 1);
> +	}
> +	spec->num_smuxes = stac92hd71bxx_connected_smuxes(codec, 0x1e);
> +
> +	spec->multiout.num_dacs = 1;
> +	spec->multiout.hp_nid = 0x11;
> +	spec->multiout.dac_nids = stac92hd71bxx_dac_nids;
> +
> +	err = stac92xx_parse_auto_config(codec, 0x21, 0);
> +	if (!err) {
> +		if (spec->board_config < 0) {
> +			printk(KERN_WARNING "hda_codec: No auto-config is "
> +			       "available, default to model=ref\n");
> +			spec->board_config = STAC_92HD71B5_REF;
> +			goto again;
> +		}
> +		err = -EINVAL;
> +	}
> +
> +	if (err < 0) {
> +		stac92xx_free(codec);
> +		return err;
> +	}
> +
> +	return 0;
> +}
> +
> +static struct hda_input_mux stac92hd75b_5port_dmux = {
> +	.num_items = 3,
> +	.items = {
> +		{ "Analog Inputs", 0x00 },
> +		{ "Mixer", 0x01 },
> +		{ "Digital Mic 1", 0x02 },
> +	}
> +};
> +
> +static int patch_stac92hd75b_5port(struct hda_codec *codec)
> +{
> +	struct sigmatel_spec *spec;
> +	int err = 0;
> +
> +	spec  = kzalloc(sizeof(*spec), GFP_KERNEL);
> +	if (spec == NULL)
> +		return -ENOMEM;
> +
> +	codec->spec = spec;
> +	codec->patch_ops = stac92xx_patch_ops;
> +	spec->num_pins = ARRAY_SIZE(stac92hd75b_5port_pin_nids);
> +	spec->pin_nids = stac92hd75b_5port_pin_nids;
> +
> +	memcpy(&spec->private_dimux, &stac92hd75b_5port_dmux,
> +			sizeof(stac92hd75b_5port_dmux));
> +	spec->board_config = snd_hda_check_board_config(codec,
> +							STAC_92HD75B_5PORT_MODELS,
> +							stac92hd75b_5port_models,
> +							stac92hd75b_5port_cfg_tbl);
> +again:
> +	if (spec->board_config < 0) {
> +		snd_printdd(KERN_INFO "hda_codec: Unknown model for"
> +			" STAC92HD75B_5PORT, using BIOS defaults\n");
> +		err = stac92xx_save_bios_config_regs(codec);
> +		if (err < 0) {
> +			stac92xx_free(codec);
> +			return err;
> +		}
> +		spec->pin_configs = spec->bios_pin_configs;
> +	} else {
> +		spec->pin_configs = stac92hd75b_5port_brd_tbl[spec->board_config];
> +		if (!spec->pin_configs) {
> +			err = stac92xx_save_bios_config_regs(codec);
> +			if (err < 0) {
> +				stac92xx_free(codec);
> +				return err;
> +			}
> +			spec->pin_configs = spec->bios_pin_configs;
> +		} else
> +			stac92xx_set_config_regs(codec);
> +	}
> +
> +	if (spec->board_config > STAC_92HD75B_5PORT_REF) {
> +		/* GPIO0 = EAPD */
> +		spec->gpio_mask = 0x01;
> +		spec->gpio_dir = 0x01;
> +		spec->gpio_data = 0x01;
> +		spec->eapd_mask = 0x01; /* needed? */
> +		spec->eapd_switch = 1;  /* needed? */
> +	}
> +
> +	if (spec->board_config == STAC_HP_M4) {
> +		/* Enable VREF power saving on GPIO1 detect */
> +		snd_hda_codec_write_cache(codec, codec->afg, 0,
> +			AC_VERB_SET_GPIO_UNSOLICITED_RSP_MASK, 0x02);
> +		snd_hda_codec_write_cache(codec, codec->afg, 0,
> +				AC_VERB_SET_UNSOLICITED_ENABLE,
> +				(AC_USRSP_EN | STAC_VREF_EVENT | 0x01));
> +		spec->gpio_mask |= 0x02;
> +		stac92xx_set_config_reg(codec, 0x0e, 0x01813040);
> +					stac92xx_auto_set_pinctl(codec, 0x0e,
> +					AC_PINCTL_IN_EN | AC_PINCTL_VREF_80);
> +		spec->pin_configs[4] = 0x01813040;
> +	}
> +	if ((codec->revision_id & 0xf) == 0 ||
> +			(codec->revision_id & 0xf) == 1) {
> +#ifdef SND_HDA_NEEDS_RESUME
> +		codec->patch_ops = stac92hd71bxx_patch_ops;
> +#endif
> +		spec->stream_delay = 40; /* 40 milliseconds */
> +	}
> +
> +	spec->mixer = stac92hd71bxx_analog_mixer;
> +	spec->dinput_mux = &spec->private_dimux;
> +	spec->init = &stac92hd71bxx_analog_core_init[HD_DISABLE_PORTF];
> +	codec->slave_dig_outs = stac92hd71bxx_slave_dig_outs;
> +
> +	spec->num_pwrs = 0;
> +	spec->powerdown_adcs = 1;
> +	spec->digbeep_nid = 0x26;
> +
> +	spec->mux_nids = stac92hd71bxx_mux_nids;
> +	spec->adc_nids = stac92hd71bxx_adc_nids;
> +	spec->dmic_nids = stac92hd75b_5port_dmic_nids;
> +	spec->dmux_nids = stac92hd71bxx_dmux_nids;
> +	spec->smux_nids = stac92hd71bxx_smux_nids;
> +	spec->num_muxes = ARRAY_SIZE(stac92hd71bxx_mux_nids);
> +	spec->num_adcs = ARRAY_SIZE(stac92hd71bxx_adc_nids);
> +	spec->num_dmics = stac92hd71bxx_connected_ports(codec,
> +				stac92hd75b_5port_dmic_nids,
> +				STAC92HD75B_5PORT_NUM_DMICS);
> +	spec->num_dmuxes = ARRAY_SIZE(stac92hd71bxx_dmux_nids);
> +	spec->num_smuxes = stac92hd71bxx_connected_smuxes(codec, 0x1e);
> +
> +	spec->multiout.num_dacs = 1;
> +	spec->multiout.hp_nid = 0x11;
> +	spec->multiout.dac_nids = stac92hd71bxx_dac_nids;
> +	spec->private_dimux.num_items += spec->num_dmics -
> +		(ARRAY_SIZE(stac92hd75b_5port_dmic_nids) - 1);
> +
> +	err = stac92xx_parse_auto_config(codec, 0x21, 0);
> +	if (!err) {
> +		if (spec->board_config < 0) {
> +			printk(KERN_WARNING "hda_codec: No auto-config is "
> +			       "available, default to model=ref\n");
> +			spec->board_config = STAC_92HD75B_5PORT_REF;
> +			goto again;
> +		}
> +		err = -EINVAL;
> +	}
> +
> +	if (err < 0) {
> +		stac92xx_free(codec);
> +		return err;
> +	}
> +
> +	return 0;
> +}
> +
>  static struct hda_input_mux stac92hd71bxx_dmux = {
>  	.num_items = 4,
>  	.items = {
> @@ -4549,10 +4980,12 @@ static int patch_stac92hd71bxx(struct hd
>  	codec->spec = spec;
>  	codec->patch_ops = stac92xx_patch_ops;
>  	spec->num_pins = ARRAY_SIZE(stac92hd71bxx_pin_nids);
> -	spec->num_pwrs = ARRAY_SIZE(stac92hd71bxx_pwr_nids);
>  	spec->pin_nids = stac92hd71bxx_pin_nids;
> -	memcpy(&spec->private_dimux, &stac92hd71bxx_dmux,
> -			sizeof(stac92hd71bxx_dmux));
> +
> +	/* On 92HD75B3/92HD75B4 0x27 isn't a pin nid */
> +	if (codec->vendor_id == 0x111d7603)
> +		spec->num_pins--;
> +
>  	spec->board_config = snd_hda_check_board_config(codec,
>  							STAC_92HD71BXX_MODELS,
>  							stac92hd71bxx_models,
> @@ -4577,46 +5010,35 @@ again:
>  		spec->gpio_mask = 0x01;
>  		spec->gpio_dir = 0x01;
>  		spec->gpio_data = 0x01;
> +		spec->eapd_mask = 0x01; /* needed? */
> +		spec->eapd_switch = 1;  /* needed? */
>  	}
>  
> +	spec->mux_nids = stac92hd71bxx_mux_nids;
> +	spec->adc_nids = stac92hd71bxx_adc_nids;
> +	spec->dmic_nids = stac92hd71bxx_dmic_nids;
> +	spec->dmux_nids = stac92hd71bxx_dmux_nids;
> +	spec->smux_nids = stac92hd71bxx_smux_nids;
> +	spec->num_muxes = ARRAY_SIZE(stac92hd71bxx_mux_nids);
> +	spec->num_adcs = ARRAY_SIZE(stac92hd71bxx_adc_nids);
> +	spec->num_dmics = stac92hd71bxx_connected_ports(codec,
> +				stac92hd71bxx_dmic_nids,
> +				STAC92HD71BXX_NUM_DMICS);
> +	spec->num_smuxes = stac92hd71bxx_connected_smuxes(codec, 0x1e);
> +
>  	switch (codec->vendor_id) {
> -	case 0x111d76b6: /* 4 Port without Analog Mixer */
> -	case 0x111d76b7:
>  	case 0x111d76b4: /* 6 Port without Analog Mixer */
>  	case 0x111d76b5:
> +		memcpy(&spec->private_dimux, &stac92hd71b5_dmux,
> +			sizeof(stac92hd71b5_dmux));
> +		if (spec->num_dmics) {
> +			spec->num_dmuxes = ARRAY_SIZE(stac92hd71bxx_dmux_nids);
> +			spec->dinput_mux = &spec->private_dimux;
> +		}
>  		spec->mixer = stac92hd71bxx_mixer;
>  		spec->init = stac92hd71bxx_core_init;
>  		codec->slave_dig_outs = stac92hd71bxx_slave_dig_outs;
>  		break;
> -	case 0x111d7608: /* 5 Port with Analog Mixer */
> -		switch (spec->board_config) {
> -		case STAC_HP_M4:
> -			/* Enable VREF power saving on GPIO1 detect */
> -			snd_hda_codec_write_cache(codec, codec->afg, 0,
> -				AC_VERB_SET_GPIO_UNSOLICITED_RSP_MASK, 0x02);
> -			snd_hda_codec_write_cache(codec, codec->afg, 0,
> -					AC_VERB_SET_UNSOLICITED_ENABLE,
> -					(AC_USRSP_EN | STAC_VREF_EVENT | 0x01));
> -			spec->gpio_mask |= 0x02;
> -			break;
> -		}
> -		if ((codec->revision_id & 0xf) == 0 ||
> -				(codec->revision_id & 0xf) == 1) {
> -#ifdef SND_HDA_NEEDS_RESUME
> -			codec->patch_ops = stac92hd71bxx_patch_ops;
> -#endif
> -			spec->stream_delay = 40; /* 40 milliseconds */
> -		}
> -
> -		/* no output amps */
> -		spec->num_pwrs = 0;
> -		spec->mixer = stac92hd71bxx_analog_mixer;
> -		spec->dinput_mux = &spec->private_dimux;
> -
> -		/* disable VSW */
> -		spec->init = &stac92hd71bxx_analog_core_init[HD_DISABLE_PORTF];
> -		stac92xx_set_config_reg(codec, 0xf, 0x40f000f0);
> -		break;
>  	case 0x111d7603: /* 6 Port with Analog Mixer */
>  		if ((codec->revision_id & 0xf) == 1) {
>  #ifdef SND_HDA_NEEDS_RESUME
> @@ -4624,65 +5046,29 @@ again:
>  #endif
>  			spec->stream_delay = 40; /* 40 milliseconds */
>  		}
> -
> -		/* no output amps */
> -		spec->num_pwrs = 0;
>  		/* fallthru */
>  	default:
> +		memcpy(&spec->private_dimux, &stac92hd71bxx_dmux,
> +			sizeof(stac92hd71bxx_dmux));
>  		spec->dinput_mux = &spec->private_dimux;
> +		spec->num_dmuxes = ARRAY_SIZE(stac92hd71bxx_dmux_nids);
>  		spec->mixer = stac92hd71bxx_analog_mixer;
>  		spec->init = stac92hd71bxx_analog_core_init;
>  		codec->slave_dig_outs = stac92hd71bxx_slave_dig_outs;
>  	}
>  
> -	spec->aloopback_mask = 0x50;
> -	spec->aloopback_shift = 0;
> -
> +	spec->num_pwrs = 0;
>  	spec->powerdown_adcs = 1;
>  	spec->digbeep_nid = 0x26;
> -	spec->mux_nids = stac92hd71bxx_mux_nids;
> -	spec->adc_nids = stac92hd71bxx_adc_nids;
> -	spec->dmic_nids = stac92hd71bxx_dmic_nids;
> -	spec->dmux_nids = stac92hd71bxx_dmux_nids;
> -	spec->smux_nids = stac92hd71bxx_smux_nids;
> -	spec->pwr_nids = stac92hd71bxx_pwr_nids;
> -
> -	spec->num_muxes = ARRAY_SIZE(stac92hd71bxx_mux_nids);
> -	spec->num_adcs = ARRAY_SIZE(stac92hd71bxx_adc_nids);
> -
> -	switch (spec->board_config) {
> -	case STAC_HP_M4:
> -		/* enable internal microphone */
> -		stac92xx_set_config_reg(codec, 0x0e, 0x01813040);
> -		stac92xx_auto_set_pinctl(codec, 0x0e,
> -			AC_PINCTL_IN_EN | AC_PINCTL_VREF_80);
> -		/* fallthru */
> -	case STAC_DELL_M4_2:
> -		spec->num_dmics = 0;
> -		spec->num_smuxes = 0;
> -		spec->num_dmuxes = 0;
> -		break;
> -	case STAC_DELL_M4_1:
> -	case STAC_DELL_M4_3:
> -		spec->num_dmics = 1;
> -		spec->num_smuxes = 0;
> -		spec->num_dmuxes = 0;
> -		break;
> -	default:
> -		spec->num_dmics = STAC92HD71BXX_NUM_DMICS;
> -		spec->num_smuxes = ARRAY_SIZE(stac92hd71bxx_smux_nids);
> -		spec->num_dmuxes = ARRAY_SIZE(stac92hd71bxx_dmux_nids);
> -	};
>  
>  	spec->multiout.num_dacs = 1;
>  	spec->multiout.hp_nid = 0x11;
>  	spec->multiout.dac_nids = stac92hd71bxx_dac_nids;
> -	if (spec->dinput_mux)
> -		spec->private_dimux.num_items +=
> +	spec->private_dimux.num_items +=
>  			spec->num_dmics -
>  				(ARRAY_SIZE(stac92hd71bxx_dmic_nids) - 1);
>  
> -	err = stac92xx_parse_auto_config(codec, 0x21, 0x23);
> +	err = stac92xx_parse_auto_config(codec, 0x21, 0);
>  	if (!err) {
>  		if (spec->board_config < 0) {
>  			printk(KERN_WARNING "hda_codec: No auto-config is "
> @@ -4699,7 +5085,7 @@ again:
>  	}
>  
>  	return 0;
> -};
> +}
>  
>  static int patch_stac922x(struct hda_codec *codec)
>  {
> @@ -5335,10 +5721,10 @@ struct hda_codec_preset snd_hda_preset_s
>   	{ .id = 0x838476a5, .name = "STAC9255D", .patch = patch_stac9205 },
>   	{ .id = 0x838476a6, .name = "STAC9254", .patch = patch_stac9205 },
>   	{ .id = 0x838476a7, .name = "STAC9254D", .patch = patch_stac9205 },
> -	{ .id = 0x111d7603, .name = "92HD75B3X5", .patch = patch_stac92hd71bxx},
> -	{ .id = 0x111d7604, .name = "92HD83C1X5", .patch = patch_stac92hd83xxx},
> -	{ .id = 0x111d7605, .name = "92HD81B1X5", .patch = patch_stac92hd83xxx},
> -	{ .id = 0x111d7608, .name = "92HD75B2X5", .patch = patch_stac92hd71bxx},
> +	{ .id = 0x111d7603, .name = "92HD75B3/4", .patch = patch_stac92hd71bxx },
> +	{ .id = 0x111d7604, .name = "92HD83C1X5", .patch = patch_stac92hd83xxx },
> +	{ .id = 0x111d7605, .name = "92HD81B1X5", .patch = patch_stac92hd83xxx },
> +	{ .id = 0x111d7608, .name = "92HD75B1/2", .patch = patch_stac92hd75b_5port },
>  	{ .id = 0x111d7674, .name = "92HD73D1X5", .patch = patch_stac92hd73xx },
>  	{ .id = 0x111d7675, .name = "92HD73C1X5", .patch = patch_stac92hd73xx },
>  	{ .id = 0x111d7676, .name = "92HD73E1X5", .patch = patch_stac92hd73xx },
> @@ -5348,7 +5734,7 @@ struct hda_codec_preset snd_hda_preset_s
>  	{ .id = 0x111d76b3, .name = "92HD71B7X", .patch = patch_stac92hd71bxx },
>  	{ .id = 0x111d76b4, .name = "92HD71B6X", .patch = patch_stac92hd71bxx },
>  	{ .id = 0x111d76b5, .name = "92HD71B6X", .patch = patch_stac92hd71bxx },
> -	{ .id = 0x111d76b6, .name = "92HD71B5X", .patch = patch_stac92hd71bxx },
> -	{ .id = 0x111d76b7, .name = "92HD71B5X", .patch = patch_stac92hd71bxx },
> +	{ .id = 0x111d76b6, .name = "92HD71B5X", .patch = patch_stac92hd71b5 },
> +	{ .id = 0x111d76b7, .name = "92HD71B5X", .patch = patch_stac92hd71b5 },
>  	{} /* terminator */
>  };
> [3 sound-alsa-hda-add-msi-quirk-list.patch <text/x-patch; UTF-8 (7bit)>]
> ALSA: hda - Add MSI quirk list
> 
> It is reported that models of HP dv7 laptops needs MSI to function
> properly. This adds a MSI quirk list support to snd-hda-intel to
> preset enable_msi option for machines that needs MSI disabled/enabled
> and set required setting for HP dv7 laptops.
> 
> Signed-off-by: Herton Ronaldo Krzesinski <herton at mandriva.com.br>
> 
> ---
>  sound/pci/hda/hda_intel.c |   25 +++++++++++++++++++++++++
>  1 file changed, 25 insertions(+)
> 
> diff -p -up linux-2.6.27/sound/pci/hda/hda_intel.c.orig linux-2.6.27/sound/pci/hda/hda_intel.c
> --- linux-2.6.27/sound/pci/hda/hda_intel.c.orig	2009-01-22 06:52:07.000000000 -0500
> +++ linux-2.6.27/sound/pci/hda/hda_intel.c	2009-01-22 06:55:20.000000000 -0500
> @@ -2050,6 +2050,30 @@ static int azx_dev_free(struct snd_devic
>  }
>  
>  /*
> + * white/black-listing for enable_msi
> + */
> +static struct snd_pci_quirk msi_list[] __devinitdata = {
> +	SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x30f4, "HP dv7", 0x01),
> +	SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x30fc, "HP dv7", 0x01),
> +	SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x30fd, "HP dv7", 0x01),
> +	{}
> +};
> +
> +static void __devinit check_msi(struct azx *chip)
> +{
> +	const struct snd_pci_quirk *q;
> +
> +	q = snd_pci_quirk_lookup(chip->pci, msi_list);
> +	if (q) {
> +		printk(KERN_INFO
> +		       "hda_intel: enable_msi set to 0x%x "
> +		       "for device %04x:%04x\n",
> +		       q->value, q->subvendor, q->subdevice);
> +		enable_msi = q->value;
> +	}
> +}
> +
> +/*
>   * white/black-listing for position_fix
>   */
>  static struct snd_pci_quirk position_fix_list[] __devinitdata = {
> @@ -2148,6 +2172,7 @@ static int __devinit azx_create(struct s
>  	chip->pci = pci;
>  	chip->irq = -1;
>  	chip->driver_type = driver_type;
> +	check_msi(chip);
>  	chip->msi = enable_msi;
>  	chip->dev_index = dev;
>  	INIT_WORK(&chip->irq_pending_work, azx_irq_pending_work);
> [4  <text/plain; us-ascii (7bit)>]
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel at alsa-project.org
> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel


More information about the Alsa-devel mailing list