[PATCH] Create a common directory for AVR32 and ARM9 atmel boards.
Sedji Gaouaou
sedji.gaouaou at atmel.com
Wed Oct 1 17:51:49 CEST 2008
Signed-off-by: Sedji Gaouaou <sedji.gaouaou at atmel.com>
---
sound/soc/Kconfig | 3 +-
sound/soc/Makefile | 2 +-
sound/soc/atmel/Kconfig | 43 ++
sound/soc/atmel/Makefile | 15 +
sound/soc/atmel/atmel-pcm.c | 484 +++++++++++++++++++++++
sound/soc/atmel/atmel-pcm.h | 86 ++++
sound/soc/atmel/atmel_ssc_dai.c | 803 ++++++++++++++++++++++++++++++++++++++
sound/soc/atmel/atmel_ssc_dai.h | 121 ++++++
sound/soc/atmel/playpaq_wm8510.c | 523 +++++++++++++++++++++++++
sound/soc/atmel/sam9g20_wm8731.c | 329 ++++++++++++++++
10 files changed, 2406 insertions(+), 3 deletions(-)
create mode 100644 sound/soc/atmel/Kconfig
create mode 100644 sound/soc/atmel/Makefile
create mode 100644 sound/soc/atmel/atmel-pcm.c
create mode 100644 sound/soc/atmel/atmel-pcm.h
create mode 100644 sound/soc/atmel/atmel_ssc_dai.c
create mode 100644 sound/soc/atmel/atmel_ssc_dai.h
create mode 100644 sound/soc/atmel/playpaq_wm8510.c
create mode 100644 sound/soc/atmel/sam9g20_wm8731.c
diff --git a/sound/soc/Kconfig b/sound/soc/Kconfig
index 4dfda66..615ebf0 100644
--- a/sound/soc/Kconfig
+++ b/sound/soc/Kconfig
@@ -23,8 +23,7 @@ config SND_SOC_AC97_BUS
bool
# All the supported Soc's
-source "sound/soc/at32/Kconfig"
-source "sound/soc/at91/Kconfig"
+source "sound/soc/atmel/Kconfig"
source "sound/soc/au1x/Kconfig"
source "sound/soc/pxa/Kconfig"
source "sound/soc/s3c24xx/Kconfig"
diff --git a/sound/soc/Makefile b/sound/soc/Makefile
index d849349..4d475c3 100644
--- a/sound/soc/Makefile
+++ b/sound/soc/Makefile
@@ -1,5 +1,5 @@
snd-soc-core-objs := soc-core.o soc-dapm.o
obj-$(CONFIG_SND_SOC) += snd-soc-core.o
-obj-$(CONFIG_SND_SOC) += codecs/ at32/ at91/ pxa/ s3c24xx/ sh/ fsl/ davinci/
+obj-$(CONFIG_SND_SOC) += codecs/ atmel/ pxa/ s3c24xx/ sh/ fsl/ davinci/
obj-$(CONFIG_SND_SOC) += omap/ au1x/ blackfin/
diff --git a/sound/soc/atmel/Kconfig b/sound/soc/atmel/Kconfig
new file mode 100644
index 0000000..170d9da
--- /dev/null
+++ b/sound/soc/atmel/Kconfig
@@ -0,0 +1,43 @@
+config SND_ATMEL_SOC
+ tristate "SoC Audio for the Atmel System-on-Chip"
+ depends on ARCH_AT91 || AVR32
+ help
+ Say Y or M if you want to add support for codecs attached to
+ the AT91 SSC interface. You will also need
+ to select the audio interfaces to support below.
+
+config SND_ATMEL_SOC_SSC
+ tristate
+ depends on SND_ATMEL_SOC
+ help
+ Say Y or M if you want to add support for codecs the
+ ATMEL SSC interface. You will also needs to select the individual
+ machine drivers to support below.
+
+config SND_AT91_SOC_SAM9G20_WM8731
+ tristate "SoC Audio support for WM8731-based At91sam9g20 evaluation board"
+ depends on ATMEL_SSC && ARCH_AT91SAM9G20 && SND_ATMEL_SOC
+ select SND_ATMEL_SOC_SSC
+ select SND_SOC_WM8731
+ help
+ Say Y if you want to add support for SoC audio on WM8731-based
+ AT91sam9g20 evaluation board.
+
+config SND_AT32_SOC_PLAYPAQ
+ tristate "SoC Audio support for PlayPaq with WM8510"
+ depends on SND_ATMEL_SOC && BOARD_PLAYPAQ
+ select SND_ATMEL_SOC_SSC
+ select SND_SOC_WM8510
+ help
+ Say Y or M here if you want to add support for SoC audio
+ on the LRS PlayPaq.
+
+config SND_AT32_SOC_PLAYPAQ_SLAVE
+ bool "Run CODEC on PlayPaq in slave mode"
+ depends on SND_AT32_SOC_PLAYPAQ
+ default n
+ help
+ Say Y if you want to run with the AT32 SSC generating the BCLK
+ and FRAME signals on the PlayPaq. Unless you want to play
+ with the AT32 as the SSC master, you probably want to say N here,
+ as this will give you better sound quality.
diff --git a/sound/soc/atmel/Makefile b/sound/soc/atmel/Makefile
new file mode 100644
index 0000000..f54a7cc
--- /dev/null
+++ b/sound/soc/atmel/Makefile
@@ -0,0 +1,15 @@
+# AT91 Platform Support
+snd-soc-atmel-pcm-objs := atmel-pcm.o
+snd-soc-atmel_ssc_dai-objs := atmel_ssc_dai.o
+
+obj-$(CONFIG_SND_ATMEL_SOC) += snd-soc-atmel-pcm.o
+obj-$(CONFIG_SND_ATMEL_SOC_SSC) += snd-soc-atmel_ssc_dai.o
+
+# AT91 Machine Support
+snd-soc-sam9g20-wm8731-objs := sam9g20_wm8731.o
+
+# AT32 Machine Support
+snd-soc-playpaq-objs := playpaq_wm8510.o
+
+obj-$(CONFIG_SND_AT91_SOC_SAM9G20_WM8731) += snd-soc-sam9g20-wm8731.o
+obj-$(CONFIG_SND_AT32_SOC_PLAYPAQ) += snd-soc-playpaq.o
diff --git a/sound/soc/atmel/atmel-pcm.c b/sound/soc/atmel/atmel-pcm.c
new file mode 100644
index 0000000..6d317d2
--- /dev/null
+++ b/sound/soc/atmel/atmel-pcm.c
@@ -0,0 +1,484 @@
+/*
+ * atmel-pcm.c -- ALSA PCM interface for the Atmel atmel SoC.
+ *
+ * Copyright (C) 2005 SAN People
+ * Copyright (C) 2008 Atmel
+ *
+ * Authors: Sedji Gaouaou <sedji.gaouaou at atmel.com>
+ *
+ * Based on at91-pcm. by:
+ * Frank Mandarino <fmandarino at endrelia.com>
+ * Copyright 2006 Endrelia Technologies Inc.
+ *
+ * Based on pxa2xx-pcm.c by:
+ *
+ * Author: Nicolas Pitre
+ * Created: Nov 30, 2004
+ * Copyright: (C) 2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/dma-mapping.h>
+#include <linux/atmel_pdc.h>
+#include <linux/atmel-ssc.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+
+#include <mach/hardware.h>
+
+#include "atmel-pcm.h"
+
+
+/*--------------------------------------------------------------------------*\
+ * Hardware definition
+\*--------------------------------------------------------------------------*/
+/* TODO: These values were taken from the AT91 platform driver, check
+ * them against real values for AT32
+ */
+static const struct snd_pcm_hardware atmel_pcm_hardware = {
+ .info = SNDRV_PCM_INFO_MMAP |
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_INTERLEAVED |
+ SNDRV_PCM_INFO_PAUSE,
+ .formats = SNDRV_PCM_FMTBIT_S16_LE,
+ .period_bytes_min = 32,
+ .period_bytes_max = 8192,
+ .periods_min = 2,
+ .periods_max = 1024,
+ .buffer_bytes_max = 32 * 1024,
+};
+
+
+/*--------------------------------------------------------------------------*\
+ * Data types
+\*--------------------------------------------------------------------------*/
+struct atmel_runtime_data {
+ struct atmel_pcm_dma_params *params;
+ dma_addr_t dma_buffer; /* physical address of dma buffer */
+ dma_addr_t dma_buffer_end; /* first address beyond DMA buffer */
+ size_t period_size;
+
+ dma_addr_t period_ptr; /* physical address of next period */
+ int periods; /* period index of period_ptr */
+
+ /* PDC register save */
+ u32 pdc_xpr_save;
+ u32 pdc_xcr_save;
+ u32 pdc_xnpr_save;
+ u32 pdc_xncr_save;
+};
+
+
+/*--------------------------------------------------------------------------*\
+ * Helper functions
+\*--------------------------------------------------------------------------*/
+static int atmel_pcm_preallocate_dma_buffer(struct snd_pcm *pcm,
+ int stream)
+{
+ struct snd_pcm_substream *substream = pcm->streams[stream].substream;
+ struct snd_dma_buffer *buf = &substream->dma_buffer;
+ size_t size = atmel_pcm_hardware.buffer_bytes_max;
+
+ buf->dev.type = SNDRV_DMA_TYPE_DEV;
+ buf->dev.dev = pcm->card->dev;
+ buf->private_data = NULL;
+ buf->area = dma_alloc_coherent(pcm->card->dev, size,
+ &buf->addr, GFP_KERNEL);
+ pr_debug("atmel-pcm:"
+ "preallocate_dma_buffer: area=%p, addr=%p, size=%d\n",
+ (void *) buf->area,
+ (void *) buf->addr,
+ size);
+
+ if (!buf->area)
+ return -ENOMEM;
+
+ buf->bytes = size;
+ return 0;
+}
+/*--------------------------------------------------------------------------*\
+ * ISR
+\*--------------------------------------------------------------------------*/
+static void atmel_pcm_dma_irq(u32 ssc_sr,
+ struct snd_pcm_substream *substream)
+{
+ struct atmel_runtime_data *prtd = substream->runtime->private_data;
+ struct atmel_pcm_dma_params *params = prtd->params;
+ static int count = 0;
+
+ count++;
+
+ if (ssc_sr & params->mask->ssc_endbuf) {
+ pr_warning("atmel-pcm: buffer %s on %s"
+ " (SSC_SR=%#x, count=%d)\n",
+ substream->stream == SNDRV_PCM_STREAM_PLAYBACK
+ ? "underrun" : "overrun",
+ params->name, ssc_sr, count);
+
+ /* re-start the PDC */
+ ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR,
+ params->mask->pdc_disable);
+ prtd->period_ptr += prtd->period_size;
+ if (prtd->period_ptr >= prtd->dma_buffer_end)
+ prtd->period_ptr = prtd->dma_buffer;
+
+ ssc_writex(params->ssc->regs, params->pdc->xpr,
+ prtd->period_ptr);
+ ssc_writex(params->ssc->regs, params->pdc->xcr,
+ prtd->period_size / params->pdc_xfer_size);
+ ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR,
+ params->mask->pdc_enable);
+ }
+
+ if (ssc_sr & params->mask->ssc_endx) {
+ /* Load the PDC next pointer and counter registers */
+ prtd->period_ptr += prtd->period_size;
+ if (prtd->period_ptr >= prtd->dma_buffer_end)
+ prtd->period_ptr = prtd->dma_buffer;
+
+ ssc_writex(params->ssc->regs, params->pdc->xnpr,
+ prtd->period_ptr);
+ ssc_writex(params->ssc->regs, params->pdc->xncr,
+ prtd->period_size / params->pdc_xfer_size);
+ }
+
+ snd_pcm_period_elapsed(substream);
+}
+
+
+/*--------------------------------------------------------------------------*\
+ * PCM operations
+\*--------------------------------------------------------------------------*/
+static int atmel_pcm_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct atmel_runtime_data *prtd = runtime->private_data;
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+
+ /* this may get called several times by oss emulation
+ * with different params */
+
+ snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer);
+ runtime->dma_bytes = params_buffer_bytes(params);
+
+ prtd->params = rtd->dai->cpu_dai->dma_data;
+ prtd->params->dma_intr_handler = atmel_pcm_dma_irq;
+
+ prtd->dma_buffer = runtime->dma_addr;
+ prtd->dma_buffer_end = runtime->dma_addr + runtime->dma_bytes;
+ prtd->period_size = params_period_bytes(params);
+
+ pr_debug("atmel-pcm: "
+ "hw_params: DMA for %s initialized "
+ "(dma_bytes=%u, period_size=%u)\n",
+ prtd->params->name,
+ runtime->dma_bytes,
+ prtd->period_size);
+ return 0;
+}
+
+static int atmel_pcm_hw_free(struct snd_pcm_substream *substream)
+{
+ struct atmel_runtime_data *prtd = substream->runtime->private_data;
+ struct atmel_pcm_dma_params *params = prtd->params;
+
+ if (params != NULL) {
+ ssc_writex(params->ssc->regs, SSC_PDC_PTCR,
+ params->mask->pdc_disable);
+ prtd->params->dma_intr_handler = NULL;
+ }
+
+ return 0;
+}
+
+static int atmel_pcm_prepare(struct snd_pcm_substream *substream)
+{
+ struct atmel_runtime_data *prtd = substream->runtime->private_data;
+ struct atmel_pcm_dma_params *params = prtd->params;
+
+ ssc_writex(params->ssc->regs, SSC_IDR,
+ params->mask->ssc_endx | params->mask->ssc_endbuf);
+ ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR,
+ params->mask->pdc_disable);
+ return 0;
+}
+
+static int atmel_pcm_trigger(struct snd_pcm_substream *substream,
+ int cmd)
+{
+ struct snd_pcm_runtime *rtd = substream->runtime;
+ struct atmel_runtime_data *prtd = rtd->private_data;
+ struct atmel_pcm_dma_params *params = prtd->params;
+ int ret = 0;
+
+ pr_debug("atmel-pcm:buffer_size = %ld,"
+ "dma_area = %p, dma_bytes = %u\n",
+ rtd->buffer_size, rtd->dma_area, rtd->dma_bytes);
+
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ prtd->period_ptr = prtd->dma_buffer;
+
+ ssc_writex(params->ssc->regs, params->pdc->xpr,
+ prtd->period_ptr);
+ ssc_writex(params->ssc->regs, params->pdc->xcr,
+ prtd->period_size / params->pdc_xfer_size);
+
+ prtd->period_ptr += prtd->period_size;
+ ssc_writex(params->ssc->regs, params->pdc->xnpr,
+ prtd->period_ptr);
+ ssc_writex(params->ssc->regs, params->pdc->xncr,
+ prtd->period_size / params->pdc_xfer_size);
+
+ pr_debug("atmel-pcm: trigger: "
+ "period_ptr=%lx, xpr=%u, "
+ "xcr=%u, xnpr=%u, xncr=%u\n",
+ (unsigned long)prtd->period_ptr,
+ ssc_readx(params->ssc->regs, params->pdc->xpr),
+ ssc_readx(params->ssc->regs, params->pdc->xcr),
+ ssc_readx(params->ssc->regs, params->pdc->xnpr),
+ ssc_readx(params->ssc->regs, params->pdc->xncr));
+
+ ssc_writex(params->ssc->regs, SSC_IER,
+ params->mask->ssc_endx | params->mask->ssc_endbuf);
+ ssc_writex(params->ssc->regs, SSC_PDC_PTCR,
+ params->mask->pdc_enable);
+
+ pr_debug("sr=%u imr=%u\n",
+ ssc_readx(params->ssc->regs, SSC_SR),
+ ssc_readx(params->ssc->regs, SSC_IER));
+ break; /* SNDRV_PCM_TRIGGER_START */
+
+ case SNDRV_PCM_TRIGGER_STOP:
+ case SNDRV_PCM_TRIGGER_SUSPEND:
+ case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+ ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR,
+ params->mask->pdc_disable);
+ break;
+
+ case SNDRV_PCM_TRIGGER_RESUME:
+ case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+ ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR,
+ params->mask->pdc_enable);
+ break;
+
+ default:
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
+static snd_pcm_uframes_t atmel_pcm_pointer(
+ struct snd_pcm_substream *substream)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct atmel_runtime_data *prtd = runtime->private_data;
+ struct atmel_pcm_dma_params *params = prtd->params;
+ dma_addr_t ptr;
+ snd_pcm_uframes_t x;
+
+ ptr = (dma_addr_t) ssc_readx(params->ssc->regs, params->pdc->xpr);
+ x = bytes_to_frames(runtime, ptr - prtd->dma_buffer);
+
+ if (x == runtime->buffer_size)
+ x = 0;
+
+ return x;
+}
+
+static int atmel_pcm_open(struct snd_pcm_substream *substream)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct atmel_runtime_data *prtd;
+ int ret = 0;
+
+ snd_soc_set_runtime_hwparams(substream, &atmel_pcm_hardware);
+
+ /* ensure that buffer size is a multiple of period size */
+ ret = snd_pcm_hw_constraint_integer(runtime,
+ SNDRV_PCM_HW_PARAM_PERIODS);
+ if (ret < 0)
+ goto out;
+
+ prtd = kzalloc(sizeof(struct atmel_runtime_data), GFP_KERNEL);
+ if (prtd == NULL) {
+ ret = -ENOMEM;
+ goto out;
+ }
+ runtime->private_data = prtd;
+
+ out:
+ return ret;
+}
+
+static int atmel_pcm_close(struct snd_pcm_substream *substream)
+{
+ struct atmel_runtime_data *prtd = substream->runtime->private_data;
+
+ kfree(prtd);
+ return 0;
+}
+
+static int atmel_pcm_mmap(struct snd_pcm_substream *substream,
+ struct vm_area_struct *vma)
+{
+ return remap_pfn_range(vma, vma->vm_start,
+ substream->dma_buffer.addr >> PAGE_SHIFT,
+ vma->vm_end - vma->vm_start, vma->vm_page_prot);
+}
+
+struct snd_pcm_ops atmel_pcm_ops = {
+ .open = atmel_pcm_open,
+ .close = atmel_pcm_close,
+ .ioctl = snd_pcm_lib_ioctl,
+ .hw_params = atmel_pcm_hw_params,
+ .hw_free = atmel_pcm_hw_free,
+ .prepare = atmel_pcm_prepare,
+ .trigger = atmel_pcm_trigger,
+ .pointer = atmel_pcm_pointer,
+ .mmap = atmel_pcm_mmap,
+};
+
+
+/*--------------------------------------------------------------------------*\
+ * ASoC platform driver
+\*--------------------------------------------------------------------------*/
+static u64 atmel_pcm_dmamask = 0xffffffff;
+
+static int atmel_pcm_new(struct snd_card *card,
+ struct snd_soc_dai *dai, struct snd_pcm *pcm)
+{
+ int ret = 0;
+
+ if (!card->dev->dma_mask)
+ card->dev->dma_mask = &atmel_pcm_dmamask;
+ if (!card->dev->coherent_dma_mask)
+ card->dev->coherent_dma_mask = 0xffffffff;
+
+ if (dai->playback.channels_min) {
+ ret = atmel_pcm_preallocate_dma_buffer(pcm,
+ SNDRV_PCM_STREAM_PLAYBACK);
+ if (ret)
+ goto out;
+ }
+
+ if (dai->capture.channels_min) {
+ pr_debug("at32-pcm:"
+ "Allocating PCM capture DMA buffer\n");
+ ret = atmel_pcm_preallocate_dma_buffer(pcm,
+ SNDRV_PCM_STREAM_CAPTURE);
+ if (ret)
+ goto out;
+ }
+ out:
+ return ret;
+}
+
+static void atmel_pcm_free_dma_buffers(struct snd_pcm *pcm)
+{
+ struct snd_pcm_substream *substream;
+ struct snd_dma_buffer *buf;
+ int stream;
+
+ for (stream = 0; stream < 2; stream++) {
+ substream = pcm->streams[stream].substream;
+ if (!substream)
+ continue;
+
+ buf = &substream->dma_buffer;
+ if (!buf->area)
+ continue;
+ dma_free_coherent(pcm->card->dev, buf->bytes,
+ buf->area, buf->addr);
+ buf->area = NULL;
+ }
+}
+
+#ifdef CONFIG_PM
+static int atmel_pcm_suspend(struct platform_device *pdev,
+ struct snd_soc_dai *dai)
+{
+ struct snd_pcm_runtime *runtime = dai->runtime;
+ struct atmel_runtime_data *prtd;
+ struct atmel_pcm_dma_params *params;
+
+ if (!runtime)
+ return 0;
+
+ prtd = runtime->private_data;
+ params = prtd->params;
+
+ /* disable the PDC and save the PDC registers */
+
+ ssc_writel(params->ssc->regs, PDC_PTCR, params->mask->pdc_disable);
+
+ prtd->pdc_xpr_save = ssc_readx(params->ssc->regs, params->pdc->xpr);
+ prtd->pdc_xcr_save = ssc_readx(params->ssc->regs, params->pdc->xcr);
+ prtd->pdc_xnpr_save = ssc_readx(params->ssc->regs, params->pdc->xnpr);
+ prtd->pdc_xncr_save = ssc_readx(params->ssc->regs, params->pdc->xncr);
+
+ return 0;
+}
+
+static int atmel_pcm_resume(struct platform_device *pdev,
+ struct snd_soc_dai *dai)
+{
+ struct snd_pcm_runtime *runtime = dai->runtime;
+ struct atmel_runtime_data *prtd;
+ struct atmel_pcm_dma_params *params;
+
+ if (!runtime)
+ return 0;
+
+ prtd = runtime->private_data;
+ params = prtd->params;
+
+ /* restore the PDC registers and enable the PDC */
+ ssc_writex(params->ssc->regs, params->pdc->xpr, prtd->pdc_xpr_save);
+ ssc_writex(params->ssc->regs, params->pdc->xcr, prtd->pdc_xcr_save);
+ ssc_writex(params->ssc->regs, params->pdc->xnpr, prtd->pdc_xnpr_save);
+ ssc_writex(params->ssc->regs, params->pdc->xncr, prtd->pdc_xncr_save);
+
+ ssc_writel(params->ssc->regs, PDC_PTCR, params->mask->pdc_enable);
+ return 0;
+}
+#else
+#define atmel_pcm_suspend NULL
+#define atmel_pcm_resume NULL
+#endif
+
+struct snd_soc_platform atmel_soc_platform = {
+ .name = "atmel-audio",
+ .pcm_ops = &atmel_pcm_ops,
+ .pcm_new = atmel_pcm_new,
+ .pcm_free = atmel_pcm_free_dma_buffers,
+ .suspend = atmel_pcm_suspend,
+ .resume = atmel_pcm_resume,
+};
+EXPORT_SYMBOL_GPL(atmel_soc_platform);
+
+MODULE_AUTHOR("Sedji Gaouaou <sedji.gaouaou at atmel.com>");
+MODULE_DESCRIPTION("Atmel PCM module");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/atmel/atmel-pcm.h b/sound/soc/atmel/atmel-pcm.h
new file mode 100644
index 0000000..ec9b282
--- /dev/null
+++ b/sound/soc/atmel/atmel-pcm.h
@@ -0,0 +1,86 @@
+/*
+ * at91-pcm.h - ALSA PCM interface for the Atmel AT91 SoC.
+ *
+ * Copyright (C) 2005 SAN People
+ * Copyright (C) 2008 Atmel
+ *
+ * Authors: Sedji Gaouaou <sedji.gaouaou at atmel.com>
+ *
+ * Based on at91-pcm. by:
+ * Frank Mandarino <fmandarino at endrelia.com>
+ * Copyright 2006 Endrelia Technologies Inc.
+ *
+ * Based on pxa2xx-pcm.c by:
+ *
+ * Author: Nicolas Pitre
+ * Created: Nov 30, 2004
+ * Copyright: (C) 2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef _ATMEL_PCM_H
+#define _ATMEL_PCM_H
+
+#include <linux/atmel-ssc.h>
+
+/*
+ * Registers and status bits that are required by the PCM driver.
+ */
+struct atmel_pdc_regs {
+ unsigned int xpr; /* PDC recv/trans pointer */
+ unsigned int xcr; /* PDC recv/trans counter */
+ unsigned int xnpr; /* PDC next recv/trans pointer */
+ unsigned int xncr; /* PDC next recv/trans counter */
+ unsigned int ptcr; /* PDC transfer control */
+};
+
+struct atmel_ssc_mask {
+ u32 ssc_enable; /* SSC recv/trans enable */
+ u32 ssc_disable; /* SSC recv/trans disable */
+ u32 ssc_endx; /* SSC ENDTX or ENDRX */
+ u32 ssc_endbuf; /* SSC TXBUFE or RXBUFF */
+ u32 pdc_enable; /* PDC recv/trans enable */
+ u32 pdc_disable; /* PDC recv/trans disable */
+};
+
+/*
+ * This structure, shared between the PCM driver and the interface,
+ * contains all information required by the PCM driver to perform the
+ * PDC DMA operation. All fields except dma_intr_handler() are initialized
+ * by the interface. The dms_intr_handler() pointer is set by the PCM
+ * driver and called by the interface SSC interrupt handler if it is
+ * non-NULL.
+ */
+struct atmel_pcm_dma_params {
+ char *name; /* stream identifier */
+ int pdc_xfer_size; /* PDC counter increment in bytes */
+ struct ssc_device *ssc; /* SSC device for stream */
+ struct atmel_pdc_regs *pdc; /* PDC receive or transmit registers */
+ struct atmel_ssc_mask *mask; /* SSC & PDC status bits */
+ struct snd_pcm_substream *substream;
+ void (*dma_intr_handler)(u32, struct snd_pcm_substream *);
+};
+
+extern struct snd_soc_platform atmel_soc_platform;
+
+
+/*
+ * SSC register access (since ssc_writel() / ssc_readl() require literal name)
+ */
+#define ssc_readx(base, reg) (__raw_readl((base) + (reg)))
+#define ssc_writex(base, reg, value) __raw_writel((value), (base) + (reg))
+
+#endif /* _ATMEL_PCM_H */
diff --git a/sound/soc/atmel/atmel_ssc_dai.c b/sound/soc/atmel/atmel_ssc_dai.c
new file mode 100644
index 0000000..2ed1575
--- /dev/null
+++ b/sound/soc/atmel/atmel_ssc_dai.c
@@ -0,0 +1,803 @@
+/*
+ * atmel_ssc_dai.c -- ALSA SoC ATMEL SSC Audio Layer Platform driver
+ *
+ * Copyright (C) 2005 SAN People
+ * Copyright (C) 2008 Atmel
+ *
+ * Author: Sedji Gaouaou <sedji.gaouaou at atmel.com>
+ * ATMEL CORP.
+ *
+ * Based on at91-ssc.c by
+ * Frank Mandarino <fmandarino at endrelia.com>
+ * Based on pxa2xx Platform drivers by
+ * Liam Girdwood <liam.girdwood at wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/atmel_pdc.h>
+
+#include <linux/atmel-ssc.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/initval.h>
+#include <sound/soc.h>
+
+#include <mach/hardware.h>
+
+#include "atmel-pcm.h"
+#include "atmel_ssc_dai.h"
+
+
+#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9G20)
+#define NUM_SSC_DEVICES 1
+#else
+#define NUM_SSC_DEVICES 3
+#endif
+
+/*
+ * SSC PDC registers required by the PCM DMA engine.
+ */
+static struct atmel_pdc_regs pdc_tx_reg = {
+ .xpr = ATMEL_PDC_TPR,
+ .xcr = ATMEL_PDC_TCR,
+ .xnpr = ATMEL_PDC_TNPR,
+ .xncr = ATMEL_PDC_TNCR,
+};
+
+static struct atmel_pdc_regs pdc_rx_reg = {
+ .xpr = ATMEL_PDC_RPR,
+ .xcr = ATMEL_PDC_RCR,
+ .xnpr = ATMEL_PDC_RNPR,
+ .xncr = ATMEL_PDC_RNCR,
+};
+
+/*
+ * SSC & PDC status bits for transmit and receive.
+ */
+static struct atmel_ssc_mask ssc_tx_mask = {
+ .ssc_enable = SSC_BIT(CR_TXEN),
+ .ssc_disable = SSC_BIT(CR_TXDIS),
+ .ssc_endx = SSC_BIT(SR_ENDTX),
+ .ssc_endbuf = SSC_BIT(SR_TXBUFE),
+ .pdc_enable = ATMEL_PDC_TXTEN,
+ .pdc_disable = ATMEL_PDC_TXTDIS,
+};
+
+static struct atmel_ssc_mask ssc_rx_mask = {
+ .ssc_enable = SSC_BIT(CR_RXEN),
+ .ssc_disable = SSC_BIT(CR_RXDIS),
+ .ssc_endx = SSC_BIT(SR_ENDRX),
+ .ssc_endbuf = SSC_BIT(SR_RXBUFF),
+ .pdc_enable = ATMEL_PDC_RXTEN,
+ .pdc_disable = ATMEL_PDC_RXTDIS,
+};
+
+
+/*
+ * DMA parameters.
+ */
+static struct atmel_pcm_dma_params ssc_dma_params[NUM_SSC_DEVICES][2] = {
+ {{
+ .name = "SSC0 PCM out",
+ .pdc = &pdc_tx_reg,
+ .mask = &ssc_tx_mask,
+ },
+ {
+ .name = "SSC0 PCM in",
+ .pdc = &pdc_rx_reg,
+ .mask = &ssc_rx_mask,
+ } },
+#if NUM_SSC_DEVICES == 3
+ {{
+ .name = "SSC1 PCM out",
+ .pdc = &pdc_tx_reg,
+ .mask = &ssc_tx_mask,
+ },
+ {
+ .name = "SSC1 PCM in",
+ .pdc = &pdc_rx_reg,
+ .mask = &ssc_rx_mask,
+ } },
+ {{
+ .name = "SSC2 PCM out",
+ .pdc = &pdc_tx_reg,
+ .mask = &ssc_tx_mask,
+ },
+ {
+ .name = "SSC2 PCM in",
+ .pdc = &pdc_rx_reg,
+ .mask = &ssc_rx_mask,
+ } },
+#endif
+};
+
+
+static struct atmel_ssc_info ssc_info[NUM_SSC_DEVICES] = {
+ {
+ .name = "ssc0",
+ .lock = __SPIN_LOCK_UNLOCKED(ssc_info[0].lock),
+ .dir_mask = SSC_DIR_MASK_UNUSED,
+ .initialized = 0,
+ },
+#if NUM_SSC_DEVICES == 3
+ {
+ .name = "ssc1",
+ .lock = __SPIN_LOCK_UNLOCKED(ssc_info[1].lock),
+ .dir_mask = SSC_DIR_MASK_UNUSED,
+ .initialized = 0,
+ },
+ {
+ .name = "ssc2",
+ .lock = __SPIN_LOCK_UNLOCKED(ssc_info[2].lock),
+ .dir_mask = SSC_DIR_MASK_UNUSED,
+ .initialized = 0,
+ },
+#endif
+};
+
+
+/*
+ * SSC interrupt handler. Passes PDC interrupts to the DMA
+ * interrupt handler in the PCM driver.
+ */
+static irqreturn_t atmel_ssc_interrupt(int irq, void *dev_id)
+{
+ struct atmel_ssc_info *ssc_p = dev_id;
+ struct atmel_pcm_dma_params *dma_params;
+ u32 ssc_sr;
+ u32 ssc_substream_mask;
+ int i;
+
+ ssc_sr = (unsigned long)ssc_readl(ssc_p->ssc->regs, SR)
+ & (unsigned long)ssc_readl(ssc_p->ssc->regs, IMR);
+
+ /*
+ * Loop through the substreams attached to this SSC. If
+ * a DMA-related interrupt occurred on that substream, call
+ * the DMA interrupt handler function, if one has been
+ * registered in the dma_params structure by the PCM driver.
+ */
+ for (i = 0; i < ARRAY_SIZE(ssc_p->dma_params); i++) {
+ dma_params = ssc_p->dma_params[i];
+
+ if ((dma_params != NULL) &&
+ (dma_params->dma_intr_handler != NULL)) {
+ ssc_substream_mask = (dma_params->mask->ssc_endx |
+ dma_params->mask->ssc_endbuf);
+ if (ssc_sr & ssc_substream_mask) {
+ dma_params->dma_intr_handler(ssc_sr,
+ dma_params->
+ substream);
+ }
+ }
+ }
+
+ return IRQ_HANDLED;
+}
+
+
+/*-------------------------------------------------------------------------*\
+ * DAI functions
+\*-------------------------------------------------------------------------*/
+/*
+ * Startup. Only that one substream allowed in each direction.
+ */
+static int atmel_ssc_startup(struct snd_pcm_substream *substream)
+{
+ struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream);
+ struct atmel_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id];
+ int dir_mask;
+
+ pr_debug("atmel_ssc_startup: SSC_SR=0x%u\n",
+ ssc_readl(ssc_p->ssc->regs, SR));
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ dir_mask = SSC_DIR_MASK_PLAYBACK;
+ else
+ dir_mask = SSC_DIR_MASK_CAPTURE;
+
+ spin_lock_irq(&ssc_p->lock);
+ if (ssc_p->dir_mask & dir_mask) {
+ spin_unlock_irq(&ssc_p->lock);
+ return -EBUSY;
+ }
+ ssc_p->dir_mask |= dir_mask;
+ spin_unlock_irq(&ssc_p->lock);
+
+ return 0;
+}
+
+/*
+ * Shutdown. Clear DMA parameters and shutdown the SSC if there
+ * are no other substreams open.
+ */
+static void atmel_ssc_shutdown(struct snd_pcm_substream *substream)
+{
+ struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream);
+ struct atmel_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id];
+ struct atmel_pcm_dma_params *dma_params;
+ int dir, dir_mask;
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ dir = 0;
+ else
+ dir = 1;
+
+ dma_params = ssc_p->dma_params[dir];
+
+ if (dma_params != NULL) {
+ ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_disable);
+ pr_debug("atmel_ssc_shutdown: %s disabled SSC_SR=0x%08x\n",
+ (dir ? "receive" : "transmit"),
+ ssc_readl(ssc_p->ssc->regs, SR));
+
+ dma_params->ssc = NULL;
+ dma_params->substream = NULL;
+ ssc_p->dma_params[dir] = NULL;
+ }
+
+ dir_mask = 1 << dir;
+
+ spin_lock_irq(&ssc_p->lock);
+ ssc_p->dir_mask &= ~dir_mask;
+ if (!ssc_p->dir_mask) {
+ /* Shutdown the SSC clock. */
+ pr_debug("atmel_ssc_dau: Stopping clock\n");
+ clk_disable(ssc_p->ssc->clk);
+
+ if (ssc_p->initialized) {
+ free_irq(ssc_p->ssc->irq, ssc_p);
+ ssc_p->initialized = 0;
+ }
+
+ /* Reset the SSC */
+ ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_SWRST));
+ /* Clear the SSC dividers */
+ ssc_p->cmr_div = ssc_p->tcmr_period = ssc_p->rcmr_period = 0;
+ }
+ spin_unlock_irq(&ssc_p->lock);
+}
+#if 0
+/*
+ * Record the SSC system clock rate.
+ */
+static int atmel_ssc_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
+ int clk_id, unsigned int freq, int dir)
+{
+ /*
+ * The only clock supplied to the SSC is the AT91 master clock,
+ * which is only used if the SSC is generating BCLK and/or
+ * LRC clocks.
+ */
+ switch (clk_id) {
+ case ATMEL_SYSCLK_MCK:
+ atmel_ssc_sysclk = freq;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+#endif
+/*
+ * Record the DAI format for use in hw_params().
+ */
+static int atmel_ssc_set_dai_fmt(struct snd_soc_dai *cpu_dai,
+ unsigned int fmt)
+{
+ struct atmel_ssc_info *ssc_p = &ssc_info[cpu_dai->id];
+
+ ssc_p->daifmt = fmt;
+ return 0;
+}
+
+/*
+ * Record SSC clock dividers for use in hw_params().
+ */
+static int atmel_ssc_set_dai_clkdiv(struct snd_soc_dai *cpu_dai,
+ int div_id, int div)
+{
+ struct atmel_ssc_info *ssc_p = &ssc_info[cpu_dai->id];
+
+ switch (div_id) {
+ case ATMEL_SSC_CMR_DIV:
+ /*
+ * The same master clock divider is used for both
+ * transmit and receive, so if a value has already
+ * been set, it must match this value.
+ */
+ if (ssc_p->cmr_div == 0)
+ ssc_p->cmr_div = div;
+ else
+ if (div != ssc_p->cmr_div)
+ return -EBUSY;
+ break;
+
+ case ATMEL_SSC_TCMR_PERIOD:
+ ssc_p->tcmr_period = div;
+ break;
+
+ case ATMEL_SSC_RCMR_PERIOD:
+ ssc_p->rcmr_period = div;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/*
+ * Configure the SSC.
+ */
+static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream);
+ int id = rtd->dai->cpu_dai->id;
+ struct atmel_ssc_info *ssc_p = &ssc_info[id];
+ struct atmel_pcm_dma_params *dma_params;
+ int dir, channels, bits;
+ u32 tfmr, rfmr, tcmr, rcmr;
+ int start_event;
+ int ret;
+
+ /*
+ * Currently, there is only one set of dma params for
+ * each direction. If more are added, this code will
+ * have to be changed to select the proper set.
+ */
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ dir = 0;
+ else
+ dir = 1;
+
+ dma_params = &ssc_dma_params[id][dir];
+ dma_params->ssc = ssc_p->ssc;
+ dma_params->substream = substream;
+
+ ssc_p->dma_params[dir] = dma_params;
+
+ /*
+ * The cpu_dai->dma_data field is only used to communicate the
+ * appropriate DMA parameters to the pcm driver hw_params()
+ * function. It should not be used for other purposes
+ * as it is common to all substreams.
+ */
+ rtd->dai->cpu_dai->dma_data = dma_params;
+
+ channels = params_channels(params);
+
+ /*
+ * Determine sample size in bits and the PDC increment.
+ */
+ switch (params_format(params)) {
+ case SNDRV_PCM_FORMAT_S8:
+ bits = 8;
+ dma_params->pdc_xfer_size = 1;
+ break;
+ case SNDRV_PCM_FORMAT_S16_LE:
+ bits = 16;
+ dma_params->pdc_xfer_size = 2;
+ break;
+ case SNDRV_PCM_FORMAT_S24_LE:
+ bits = 24;
+ dma_params->pdc_xfer_size = 4;
+ break;
+ case SNDRV_PCM_FORMAT_S32_LE:
+ bits = 32;
+ dma_params->pdc_xfer_size = 4;
+ break;
+ default:
+ printk(KERN_WARNING "atmel_ssc_dai: unsupported PCM format");
+ return -EINVAL;
+ }
+
+ /*
+ * The SSC only supports up to 16-bit samples in I2S format, due
+ * to the size of the Frame Mode Register FSLEN field.
+ */
+ if ((ssc_p->daifmt & SND_SOC_DAIFMT_FORMAT_MASK) == SND_SOC_DAIFMT_I2S
+ && bits > 16) {
+ printk(KERN_WARNING
+ "atmel_ssc_dai: sample size %d"
+ "is too large for I2S\n", bits);
+ return -EINVAL;
+ }
+
+ /*
+ * Compute SSC register settings.
+ */
+ switch (ssc_p->daifmt
+ & (SND_SOC_DAIFMT_FORMAT_MASK | SND_SOC_DAIFMT_MASTER_MASK)) {
+
+ case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBS_CFS:
+ /*
+ * I2S format, SSC provides BCLK and LRC clocks.
+ *
+ * The SSC transmit and receive clocks are generated
+ * from the MCK divider, and the BCLK signal
+ * is output on the SSC TK line.
+ */
+ rcmr = SSC_BF(RCMR_PERIOD, ssc_p->rcmr_period)
+ | SSC_BF(RCMR_STTDLY, START_DELAY)
+ | SSC_BF(RCMR_START, SSC_START_FALLING_RF)
+ | SSC_BF(RCMR_CKI, SSC_CKI_RISING)
+ | SSC_BF(RCMR_CKO, SSC_CKO_NONE)
+ | SSC_BF(RCMR_CKS, SSC_CKS_DIV);
+
+ rfmr = SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
+ | SSC_BF(RFMR_FSOS, SSC_FSOS_NEGATIVE)
+ | SSC_BF(RFMR_FSLEN, (bits - 1))
+ | SSC_BF(RFMR_DATNB, (channels - 1))
+ | SSC_BIT(RFMR_MSBF)
+ | SSC_BF(RFMR_LOOP, 0)
+ | SSC_BF(RFMR_DATLEN, (bits - 1));
+
+ tcmr = SSC_BF(TCMR_PERIOD, ssc_p->tcmr_period)
+ | SSC_BF(TCMR_STTDLY, START_DELAY)
+ | SSC_BF(TCMR_START, SSC_START_FALLING_RF)
+ | SSC_BF(TCMR_CKI, SSC_CKI_FALLING)
+ | SSC_BF(TCMR_CKO, SSC_CKO_CONTINUOUS)
+ | SSC_BF(TCMR_CKS, SSC_CKS_DIV);
+
+ tfmr = SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
+ | SSC_BF(TFMR_FSDEN, 0)
+ | SSC_BF(TFMR_FSOS, SSC_FSOS_NEGATIVE)
+ | SSC_BF(TFMR_FSLEN, (bits - 1))
+ | SSC_BF(TFMR_DATNB, (channels - 1))
+ | SSC_BIT(TFMR_MSBF)
+ | SSC_BF(TFMR_DATDEF, 0)
+ | SSC_BF(TFMR_DATLEN, (bits - 1));
+ break;
+
+ case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM:
+ /*
+ * I2S format, CODEC supplies BCLK and LRC clocks.
+ *
+ * The SSC transmit clock is obtained from the BCLK signal on
+ * on the TK line, and the SSC receive clock is
+ * generated from the transmit clock.
+ *
+ * For single channel data, one sample is transferred
+ * on the falling edge of the LRC clock.
+ * For two channel data, one sample is
+ * transferred on both edges of the LRC clock.
+ */
+ start_event = ((channels == 1)
+ ? SSC_START_FALLING_RF
+ : SSC_START_EDGE_RF);
+
+ rcmr = SSC_BF(RCMR_PERIOD, 0)
+ | SSC_BF(RCMR_STTDLY, START_DELAY)
+ | SSC_BF(RCMR_START, start_event)
+ | SSC_BF(RCMR_CKI, SSC_CKI_RISING)
+ | SSC_BF(RCMR_CKO, SSC_CKO_NONE)
+ | SSC_BF(RCMR_CKS, SSC_CKS_CLOCK);
+
+ rfmr = SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
+ | SSC_BF(RFMR_FSOS, SSC_FSOS_NONE)
+ | SSC_BF(RFMR_FSLEN, 0)
+ | SSC_BF(RFMR_DATNB, 0)
+ | SSC_BIT(RFMR_MSBF)
+ | SSC_BF(RFMR_LOOP, 0)
+ | SSC_BF(RFMR_DATLEN, (bits - 1));
+
+ tcmr = SSC_BF(TCMR_PERIOD, 0)
+ | SSC_BF(TCMR_STTDLY, START_DELAY)
+ | SSC_BF(TCMR_START, start_event)
+ | SSC_BF(TCMR_CKI, SSC_CKI_FALLING)
+ | SSC_BF(TCMR_CKO, SSC_CKO_NONE)
+ | SSC_BF(TCMR_CKS, SSC_CKS_PIN);
+
+ tfmr = SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
+ | SSC_BF(TFMR_FSDEN, 0)
+ | SSC_BF(TFMR_FSOS, SSC_FSOS_NONE)
+ | SSC_BF(TFMR_FSLEN, 0)
+ | SSC_BF(TFMR_DATNB, 0)
+ | SSC_BIT(TFMR_MSBF)
+ | SSC_BF(TFMR_DATDEF, 0)
+ | SSC_BF(TFMR_DATLEN, (bits - 1));
+ break;
+
+ case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBS_CFS:
+ /*
+ * DSP/PCM Mode A format, SSC provides BCLK and LRC clocks.
+ *
+ * The SSC transmit and receive clocks are generated from the
+ * MCK divider, and the BCLK signal is output
+ * on the SSC TK line.
+ */
+ rcmr = SSC_BF(RCMR_PERIOD, ssc_p->rcmr_period)
+ | SSC_BF(RCMR_STTDLY, 1)
+ | SSC_BF(RCMR_START, SSC_START_RISING_RF)
+ | SSC_BF(RCMR_CKI, SSC_CKI_RISING)
+ | SSC_BF(RCMR_CKO, SSC_CKO_NONE)
+ | SSC_BF(RCMR_CKS, SSC_CKS_DIV);
+
+ rfmr = SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
+ | SSC_BF(RFMR_FSOS, SSC_FSOS_POSITIVE)
+ | SSC_BF(RFMR_FSLEN, 0)
+ | SSC_BF(RFMR_DATNB, (channels - 1))
+ | SSC_BIT(RFMR_MSBF)
+ | SSC_BF(RFMR_LOOP, 0)
+ | SSC_BF(RFMR_DATLEN, (bits - 1));
+
+ tcmr = SSC_BF(TCMR_PERIOD, ssc_p->tcmr_period)
+ | SSC_BF(TCMR_STTDLY, 1)
+ | SSC_BF(TCMR_START, SSC_START_RISING_RF)
+ | SSC_BF(TCMR_CKI, SSC_CKI_RISING)
+ | SSC_BF(TCMR_CKO, SSC_CKO_CONTINUOUS)
+ | SSC_BF(TCMR_CKS, SSC_CKS_DIV);
+
+ tfmr = SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
+ | SSC_BF(TFMR_FSDEN, 0)
+ | SSC_BF(TFMR_FSOS, SSC_FSOS_POSITIVE)
+ | SSC_BF(TFMR_FSLEN, 0)
+ | SSC_BF(TFMR_DATNB, (channels - 1))
+ | SSC_BIT(TFMR_MSBF)
+ | SSC_BF(TFMR_DATDEF, 0)
+ | SSC_BF(TFMR_DATLEN, (bits - 1));
+ break;
+
+ case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBM_CFM:
+ default:
+ printk(KERN_WARNING "atmel_ssc_dai: unsupported DAI format 0x%x\n",
+ ssc_p->daifmt);
+ return -EINVAL;
+ break;
+ }
+ pr_debug("atmel_ssc_hw_params: "
+ "RCMR=%08x RFMR=%08x TCMR=%08x TFMR=%08x\n",
+ rcmr, rfmr, tcmr, tfmr);
+
+ if (!ssc_p->initialized) {
+
+ /* Enable PMC peripheral clock for this SSC */
+ pr_debug("atmel_ssc_dai: Starting clock\n");
+ clk_enable(ssc_p->ssc->clk);
+
+ /* Reset the SSC and its PDC registers */
+ ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_SWRST));
+
+ ssc_writel(ssc_p->ssc->regs, PDC_RPR, 0);
+ ssc_writel(ssc_p->ssc->regs, PDC_RCR, 0);
+ ssc_writel(ssc_p->ssc->regs, PDC_RNPR, 0);
+ ssc_writel(ssc_p->ssc->regs, PDC_RNCR, 0);
+
+ ssc_writel(ssc_p->ssc->regs, PDC_TPR, 0);
+ ssc_writel(ssc_p->ssc->regs, PDC_TCR, 0);
+ ssc_writel(ssc_p->ssc->regs, PDC_TNPR, 0);
+ ssc_writel(ssc_p->ssc->regs, PDC_TNCR, 0);
+
+ ret = request_irq(ssc_p->ssc->irq, atmel_ssc_interrupt, 0,
+ ssc_p->name, ssc_p);
+ if (ret < 0) {
+ printk(KERN_WARNING
+ "atmel_ssc_dai: request_irq failure\n");
+ pr_debug("Atmel_ssc_dai: Stoping clock\n");
+ clk_disable(ssc_p->ssc->clk);
+ return ret;
+ }
+
+ ssc_p->initialized = 1;
+ }
+
+ /* set SSC clock mode register */
+ ssc_writel(ssc_p->ssc->regs, CMR, ssc_p->cmr_div);
+
+ /* set receive clock mode and format */
+ ssc_writel(ssc_p->ssc->regs, RCMR, rcmr);
+ ssc_writel(ssc_p->ssc->regs, RFMR, rfmr);
+
+ /* set transmit clock mode and format */
+ ssc_writel(ssc_p->ssc->regs, TCMR, tcmr);
+ ssc_writel(ssc_p->ssc->regs, TFMR, tfmr);
+
+ pr_debug("atmel_ssc_dai,hw_params: SSC initialized\n");
+ return 0;
+}
+
+
+static int atmel_ssc_prepare(struct snd_pcm_substream *substream)
+{
+ struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream);
+ struct atmel_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id];
+ struct atmel_pcm_dma_params *dma_params;
+ int dir;
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ dir = 0;
+ else
+ dir = 1;
+
+ dma_params = ssc_p->dma_params[dir];
+
+ ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_enable);
+
+ pr_debug("%s enabled SSC_SR=0x%08x\n",
+ dir ? "receive" : "transmit",
+ ssc_readl(ssc_p->ssc->regs, SR));
+ return 0;
+}
+
+
+#ifdef CONFIG_PM
+static int atmel_ssc_suspend(struct platform_device *pdev,
+ struct snd_soc_dai *cpu_dai)
+{
+ struct atmel_ssc_info *ssc_p;
+
+ if (!cpu_dai->active)
+ return 0;
+
+ ssc_p = &ssc_info[cpu_dai->id];
+
+ /* Save the status register before disabling transmit and receive */
+ ssc_p->ssc_state.ssc_sr = ssc_readl(ssc_p->ssc->regs, SR);
+ ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_TXDIS) | SSC_BIT(CR_RXDIS));
+
+ /* Save the current interrupt mask, then disable unmasked interrupts */
+ ssc_p->ssc_state.ssc_imr = ssc_readl(ssc_p->ssc->regs, IMR);
+ ssc_writel(ssc_p->ssc->regs, IDR, ssc_p->ssc_state.ssc_imr);
+
+ ssc_p->ssc_state.ssc_cmr = ssc_readl(ssc_p->ssc->regs, CMR);
+ ssc_p->ssc_state.ssc_rcmr = ssc_readl(ssc_p->ssc->regs, RCMR);
+ ssc_p->ssc_state.ssc_rfmr = ssc_readl(ssc_p->ssc->regs, RFMR);
+ ssc_p->ssc_state.ssc_tcmr = ssc_readl(ssc_p->ssc->regs, TCMR);
+ ssc_p->ssc_state.ssc_tfmr = ssc_readl(ssc_p->ssc->regs, TFMR);
+
+ return 0;
+}
+
+
+
+static int atmel_ssc_resume(struct platform_device *pdev,
+ struct snd_soc_dai *cpu_dai)
+{
+ struct atmel_ssc_info *ssc_p;
+ u32 cr;
+
+ if (!cpu_dai->active)
+ return 0;
+
+ ssc_p = &ssc_info[cpu_dai->id];
+
+ /* restore SSC register settings */
+ ssc_writel(ssc_p->ssc->regs, TFMR, ssc_p->ssc_state.ssc_tfmr);
+ ssc_writel(ssc_p->ssc->regs, TCMR, ssc_p->ssc_state.ssc_tcmr);
+ ssc_writel(ssc_p->ssc->regs, RFMR, ssc_p->ssc_state.ssc_rfmr);
+ ssc_writel(ssc_p->ssc->regs, RCMR, ssc_p->ssc_state.ssc_rcmr);
+ ssc_writel(ssc_p->ssc->regs, CMR, ssc_p->ssc_state.ssc_cmr);
+
+ /* re-enable interrupts */
+ ssc_writel(ssc_p->ssc->regs, IER, ssc_p->ssc_state.ssc_imr);
+
+ /* Re-enable recieve and transmit as appropriate */
+ cr = 0;
+ cr |=
+ (ssc_p->ssc_state.ssc_sr & SSC_BIT(SR_RXEN)) ? SSC_BIT(CR_RXEN) : 0;
+ cr |=
+ (ssc_p->ssc_state.ssc_sr & SSC_BIT(SR_TXEN)) ? SSC_BIT(CR_TXEN) : 0;
+ ssc_writel(ssc_p->ssc->regs, CR, cr);
+
+ return 0;
+}
+#else /* CONFIG_PM */
+# define atmel_ssc_suspend NULL
+# define atmel_ssc_resume NULL
+#endif /* CONFIG_PM */
+
+
+#define ATMEL_SSC_RATES (SNDRV_PCM_RATE_8000_96000)
+
+#define ATMEL_SSC_FORMATS (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE |\
+ SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE)
+
+struct snd_soc_dai atmel_ssc_dai[NUM_SSC_DEVICES] = {
+ { .name = "atmel-ssc0",
+ .id = 0,
+ .type = SND_SOC_DAI_PCM,
+ .suspend = atmel_ssc_suspend,
+ .resume = atmel_ssc_resume,
+ .playback = {
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = ATMEL_SSC_RATES,
+ .formats = ATMEL_SSC_FORMATS,},
+ .capture = {
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = ATMEL_SSC_RATES,
+ .formats = ATMEL_SSC_FORMATS,},
+ .ops = {
+ .startup = atmel_ssc_startup,
+ .shutdown = atmel_ssc_shutdown,
+ .prepare = atmel_ssc_prepare,
+ .hw_params = atmel_ssc_hw_params,},
+ .dai_ops = {
+ .set_fmt = atmel_ssc_set_dai_fmt,
+ .set_clkdiv = atmel_ssc_set_dai_clkdiv,},
+ .private_data = &ssc_info[0],
+ },
+#if NUM_SSC_DEVICES == 3
+ { .name = "atmel-ssc1",
+ .id = 1,
+ .type = SND_SOC_DAI_PCM,
+ .suspend = atmel_ssc_suspend,
+ .resume = atmel_ssc_resume,
+ .playback = {
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = ATMEL_SSC_RATES,
+ .formats = ATMEL_SSC_FORMATS,},
+ .capture = {
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = ATMEL_SSC_RATES,
+ .formats = ATMEL_SSC_FORMATS,},
+ .ops = {
+ .startup = atmel_ssc_startup,
+ .shutdown = atmel_ssc_shutdown,
+ .prepare = atmel_ssc_prepare,
+ .hw_params = atmel_ssc_hw_params,},
+ .dai_ops = {
+ .set_fmt = atmel_ssc_set_dai_fmt,
+ .set_clkdiv = atmel_ssc_set_dai_clkdiv,},
+ .private_data = &ssc_info[1],
+ },
+ { .name = "atmel-ssc2",
+ .id = 2,
+ .type = SND_SOC_DAI_PCM,
+ .suspend = atmel_ssc_suspend,
+ .resume = atmel_ssc_resume,
+ .playback = {
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = ATMEL_SSC_RATES,
+ .formats = ATMEL_SSC_FORMATS,},
+ .capture = {
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = ATMEL_SSC_RATES,
+ .formats = ATMEL_SSC_FORMATS,},
+ .ops = {
+ .startup = atmel_ssc_startup,
+ .shutdown = atmel_ssc_shutdown,
+ .prepare = atmel_ssc_prepare,
+ .hw_params = atmel_ssc_hw_params,},
+ .dai_ops = {
+ .set_fmt = atmel_ssc_set_dai_fmt,
+ .set_clkdiv = atmel_ssc_set_dai_clkdiv,},
+ .private_data = &ssc_info[2],
+ },
+#endif
+};
+EXPORT_SYMBOL_GPL(atmel_ssc_dai);
+
+/* Module information */
+MODULE_AUTHOR("Sedji Gaouaou, sedji.gaouaou at atmel.com, www.atmel.com");
+MODULE_DESCRIPTION("ATMEL SSC ASoC Interface");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/atmel/atmel_ssc_dai.h b/sound/soc/atmel/atmel_ssc_dai.h
new file mode 100644
index 0000000..a828746
--- /dev/null
+++ b/sound/soc/atmel/atmel_ssc_dai.h
@@ -0,0 +1,121 @@
+/*
+ * atmel_ssc_dai.h - ALSA SSC interface for the Atmel SoC
+ *
+ * Copyright (C) 2005 SAN People
+ * Copyright (C) 2008 Atmel
+ *
+ * Author: Sedji Gaouaou <sedji.gaouaou at atmel.com>
+ * ATMEL CORP.
+ *
+ * Based on at91-ssc.c by
+ * Frank Mandarino <fmandarino at endrelia.com>
+ * Based on pxa2xx Platform drivers by
+ * Liam Girdwood <liam.girdwood at wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef _ATMEL_SSC_DAI_H
+#define _ATMEL_SSC_DAI_H
+
+#include <linux/types.h>
+#include <linux/atmel-ssc.h>
+
+#include "atmel-pcm.h"
+
+/* SSC system clock ids */
+#define ATMEL_SYSCLK_MCK 0 /* SSC uses AT91 MCK as system clock */
+
+/* SSC divider ids */
+#define ATMEL_SSC_CMR_DIV 0 /* MCK divider for BCLK */
+#define ATMEL_SSC_TCMR_PERIOD 1 /* BCLK divider for transmit FS */
+#define ATMEL_SSC_RCMR_PERIOD 2 /* BCLK divider for receive FS */
+/*
+ * SSC direction masks
+ */
+#define SSC_DIR_MASK_UNUSED 0
+#define SSC_DIR_MASK_PLAYBACK 1
+#define SSC_DIR_MASK_CAPTURE 2
+
+/*
+ * SSC register values that Atmel left out of <linux/atmel-ssc.h>. These
+ * are expected to be used with SSC_BF
+ */
+/* START bit field values */
+#define SSC_START_CONTINUOUS 0
+#define SSC_START_TX_RX 1
+#define SSC_START_LOW_RF 2
+#define SSC_START_HIGH_RF 3
+#define SSC_START_FALLING_RF 4
+#define SSC_START_RISING_RF 5
+#define SSC_START_LEVEL_RF 6
+#define SSC_START_EDGE_RF 7
+#define SSS_START_COMPARE_0 8
+
+/* CKI bit field values */
+#define SSC_CKI_FALLING 0
+#define SSC_CKI_RISING 1
+
+/* CKO bit field values */
+#define SSC_CKO_NONE 0
+#define SSC_CKO_CONTINUOUS 1
+#define SSC_CKO_TRANSFER 2
+
+/* CKS bit field values */
+#define SSC_CKS_DIV 0
+#define SSC_CKS_CLOCK 1
+#define SSC_CKS_PIN 2
+
+/* FSEDGE bit field values */
+#define SSC_FSEDGE_POSITIVE 0
+#define SSC_FSEDGE_NEGATIVE 1
+
+/* FSOS bit field values */
+#define SSC_FSOS_NONE 0
+#define SSC_FSOS_NEGATIVE 1
+#define SSC_FSOS_POSITIVE 2
+#define SSC_FSOS_LOW 3
+#define SSC_FSOS_HIGH 4
+#define SSC_FSOS_TOGGLE 5
+
+#define START_DELAY 1
+
+struct atmel_ssc_state {
+ u32 ssc_cmr;
+ u32 ssc_rcmr;
+ u32 ssc_rfmr;
+ u32 ssc_tcmr;
+ u32 ssc_tfmr;
+ u32 ssc_sr;
+ u32 ssc_imr;
+};
+
+
+struct atmel_ssc_info {
+ char *name;
+ struct ssc_device *ssc;
+ spinlock_t lock; /* lock for dir_mask */
+ unsigned short dir_mask; /* 0=unused, 1=playback, 2=capture */
+ unsigned short initialized; /* true if SSC has been initialized */
+ unsigned short daifmt;
+ unsigned short cmr_div;
+ unsigned short tcmr_period;
+ unsigned short rcmr_period;
+ struct atmel_pcm_dma_params *dma_params[2];
+ struct atmel_ssc_state ssc_state;
+};
+extern struct snd_soc_dai atmel_ssc_dai[];
+
+#endif /* _AT91_SSC_DAI_H */
diff --git a/sound/soc/atmel/playpaq_wm8510.c b/sound/soc/atmel/playpaq_wm8510.c
new file mode 100644
index 0000000..7e6560b
--- /dev/null
+++ b/sound/soc/atmel/playpaq_wm8510.c
@@ -0,0 +1,523 @@
+/* sound/soc/at32/playpaq_wm8510.c
+ * ASoC machine driver for PlayPaq using WM8510 codec
+ *
+ * Copyright (C) 2008 Long Range Systems
+ * Geoffrey Wossum <gwossum at acm.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This code is largely inspired by sound/soc/at91/eti_b1_wm8731.c
+ *
+ * NOTE: If you don't have the AT32 enhanced portmux configured (which
+ * isn't currently in the mainline or Atmel patched kernel), you will
+ * need to set the MCLK pin (PA30) to peripheral A in your board initialization
+ * code. Something like:
+ * at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0);
+ *
+ */
+
+/* #define DEBUG */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/clk.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+
+#include <mach/at32ap700x.h>
+#include <mach/portmux.h>
+
+#include "../codecs/wm8510.h"
+#include "at32-pcm.h"
+#include "at32-ssc.h"
+
+
+/*-------------------------------------------------------------------------*\
+ * constants
+\*-------------------------------------------------------------------------*/
+#define MCLK_PIN GPIO_PIN_PA(30)
+#define MCLK_PERIPH GPIO_PERIPH_A
+
+
+/*-------------------------------------------------------------------------*\
+ * data types
+\*-------------------------------------------------------------------------*/
+/* SSC clocking data */
+struct ssc_clock_data {
+ /* CMR div */
+ unsigned int cmr_div;
+
+ /* Frame period (as needed by xCMR.PERIOD) */
+ unsigned int period;
+
+ /* The SSC clock rate these settings where calculated for */
+ unsigned long ssc_rate;
+};
+
+
+/*-------------------------------------------------------------------------*\
+ * module data
+\*-------------------------------------------------------------------------*/
+static struct clk *_gclk0;
+static struct clk *_pll0;
+
+#define CODEC_CLK (_gclk0)
+
+
+/*-------------------------------------------------------------------------*\
+ * Sound SOC operations
+\*-------------------------------------------------------------------------*/
+#if defined CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE
+static struct ssc_clock_data playpaq_wm8510_calc_ssc_clock(
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *cpu_dai)
+{
+ struct at32_ssc_info *ssc_p = cpu_dai->private_data;
+ struct ssc_device *ssc = ssc_p->ssc;
+ struct ssc_clock_data cd;
+ unsigned int rate, width_bits, channels;
+ unsigned int bitrate, ssc_div;
+ unsigned actual_rate;
+
+
+ /*
+ * Figure out required bitrate
+ */
+ rate = params_rate(params);
+ channels = params_channels(params);
+ width_bits = snd_pcm_format_physical_width(params_format(params));
+ bitrate = rate * width_bits * channels;
+
+
+ /*
+ * Figure out required SSC divider and period for required bitrate
+ */
+ cd.ssc_rate = clk_get_rate(ssc->clk);
+ ssc_div = cd.ssc_rate / bitrate;
+ cd.cmr_div = ssc_div / 2;
+ if (ssc_div & 1) {
+ /* round cmr_div up */
+ cd.cmr_div++;
+ }
+ cd.period = width_bits - 1;
+
+
+ /*
+ * Find actual rate, compare to requested rate
+ */
+ actual_rate = (cd.ssc_rate / (cd.cmr_div * 2)) / (2 * (cd.period + 1));
+ pr_debug("playpaq_wm8510: Request rate = %d, actual rate = %d\n",
+ rate, actual_rate);
+
+
+ return cd;
+}
+#endif /* CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE */
+
+
+
+static int playpaq_wm8510_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+ struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+ struct at32_ssc_info *ssc_p = cpu_dai->private_data;
+ struct ssc_device *ssc = ssc_p->ssc;
+ unsigned int pll_out = 0, bclk = 0, mclk_div = 0;
+ int ret;
+
+
+ /* Due to difficulties with getting the correct clocks from the AT32's
+ * PLL0, we're going to let the CODEC be in charge of all the clocks
+ */
+#if !defined CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE
+ const unsigned int fmt = (SND_SOC_DAIFMT_I2S |
+ SND_SOC_DAIFMT_NB_NF |
+ SND_SOC_DAIFMT_CBM_CFM);
+#else
+ struct ssc_clock_data cd;
+ const unsigned int fmt = (SND_SOC_DAIFMT_I2S |
+ SND_SOC_DAIFMT_NB_NF |
+ SND_SOC_DAIFMT_CBS_CFS);
+#endif
+
+ if (ssc == NULL) {
+ pr_warning("playpaq_wm8510_hw_params: ssc is NULL!\n");
+ return -EINVAL;
+ }
+
+
+ /*
+ * Figure out PLL and BCLK dividers for WM8510
+ */
+ switch (params_rate(params)) {
+ case 48000:
+ pll_out = 12288000;
+ mclk_div = WM8510_MCLKDIV_1;
+ bclk = WM8510_BCLKDIV_8;
+ break;
+
+ case 44100:
+ pll_out = 11289600;
+ mclk_div = WM8510_MCLKDIV_1;
+ bclk = WM8510_BCLKDIV_8;
+ break;
+
+ case 22050:
+ pll_out = 11289600;
+ mclk_div = WM8510_MCLKDIV_2;
+ bclk = WM8510_BCLKDIV_8;
+ break;
+
+ case 16000:
+ pll_out = 12288000;
+ mclk_div = WM8510_MCLKDIV_3;
+ bclk = WM8510_BCLKDIV_8;
+ break;
+
+ case 11025:
+ pll_out = 11289600;
+ mclk_div = WM8510_MCLKDIV_4;
+ bclk = WM8510_BCLKDIV_8;
+ break;
+
+ case 8000:
+ pll_out = 12288000;
+ mclk_div = WM8510_MCLKDIV_6;
+ bclk = WM8510_BCLKDIV_8;
+ break;
+
+ default:
+ pr_warning("playpaq_wm8510: Unsupported sample rate %d\n",
+ params_rate(params));
+ return -EINVAL;
+ }
+
+
+ /*
+ * set CPU and CODEC DAI configuration
+ */
+ ret = snd_soc_dai_set_fmt(codec_dai, fmt);
+ if (ret < 0) {
+ pr_warning("playpaq_wm8510: "
+ "Failed to set CODEC DAI format (%d)\n",
+ ret);
+ return ret;
+ }
+ ret = snd_soc_dai_set_fmt(cpu_dai, fmt);
+ if (ret < 0) {
+ pr_warning("playpaq_wm8510: "
+ "Failed to set CPU DAI format (%d)\n",
+ ret);
+ return ret;
+ }
+
+
+ /*
+ * Set CPU clock configuration
+ */
+#if defined CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE
+ cd = playpaq_wm8510_calc_ssc_clock(params, cpu_dai);
+ pr_debug("playpaq_wm8510: cmr_div = %d, period = %d\n",
+ cd.cmr_div, cd.period);
+ ret = snd_soc_dai_set_clkdiv(cpu_dai, AT32_SSC_CMR_DIV, cd.cmr_div);
+ if (ret < 0) {
+ pr_warning("playpaq_wm8510: Failed to set CPU CMR_DIV (%d)\n",
+ ret);
+ return ret;
+ }
+ ret = snd_soc_dai_set_clkdiv(cpu_dai, AT32_SSC_TCMR_PERIOD,
+ cd.period);
+ if (ret < 0) {
+ pr_warning("playpaq_wm8510: "
+ "Failed to set CPU transmit period (%d)\n",
+ ret);
+ return ret;
+ }
+#endif /* CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE */
+
+
+ /*
+ * Set CODEC clock configuration
+ */
+ pr_debug("playpaq_wm8510: "
+ "pll_in = %ld, pll_out = %u, bclk = %x, mclk = %x\n",
+ clk_get_rate(CODEC_CLK), pll_out, bclk, mclk_div);
+
+
+#if !defined CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE
+ ret = snd_soc_dai_set_clkdiv(codec_dai, WM8510_BCLKDIV, bclk);
+ if (ret < 0) {
+ pr_warning
+ ("playpaq_wm8510: Failed to set CODEC DAI BCLKDIV (%d)\n",
+ ret);
+ return ret;
+ }
+#endif /* CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE */
+
+
+ ret = snd_soc_dai_set_pll(codec_dai, 0,
+ clk_get_rate(CODEC_CLK), pll_out);
+ if (ret < 0) {
+ pr_warning("playpaq_wm8510: Failed to set CODEC DAI PLL (%d)\n",
+ ret);
+ return ret;
+ }
+
+
+ ret = snd_soc_dai_set_clkdiv(codec_dai, WM8510_MCLKDIV, mclk_div);
+ if (ret < 0) {
+ pr_warning("playpaq_wm8510: Failed to set CODEC MCLKDIV (%d)\n",
+ ret);
+ return ret;
+ }
+
+
+ return 0;
+}
+
+
+
+static struct snd_soc_ops playpaq_wm8510_ops = {
+ .hw_params = playpaq_wm8510_hw_params,
+};
+
+
+
+static const struct snd_soc_dapm_widget playpaq_dapm_widgets[] = {
+ SND_SOC_DAPM_MIC("Int Mic", NULL),
+ SND_SOC_DAPM_SPK("Ext Spk", NULL),
+};
+
+
+
+static const char *intercon[][3] = {
+ /* speaker connected to SPKOUT */
+ {"Ext Spk", NULL, "SPKOUTP"},
+ {"Ext Spk", NULL, "SPKOUTN"},
+
+ {"Mic Bias", NULL, "Int Mic"},
+ {"MICN", NULL, "Mic Bias"},
+ {"MICP", NULL, "Mic Bias"},
+
+ /* Terminator */
+ {NULL, NULL, NULL},
+};
+
+
+
+static int playpaq_wm8510_init(struct snd_soc_codec *codec)
+{
+ int i;
+
+ /*
+ * Add DAPM widgets
+ */
+ for (i = 0; i < ARRAY_SIZE(playpaq_dapm_widgets); i++)
+ snd_soc_dapm_new_control(codec, &playpaq_dapm_widgets[i]);
+
+
+
+ /*
+ * Setup audio path interconnects
+ */
+ for (i = 0; intercon[i][0] != NULL; i++) {
+ snd_soc_dapm_connect_input(codec,
+ intercon[i][0],
+ intercon[i][1], intercon[i][2]);
+ }
+
+
+ /* always connected pins */
+ snd_soc_dapm_enable_pin(codec, "Int Mic");
+ snd_soc_dapm_enable_pin(codec, "Ext Spk");
+ snd_soc_dapm_sync(codec);
+
+
+
+ /* Make CSB show PLL rate */
+ snd_soc_dai_set_clkdiv(codec->dai, WM8510_OPCLKDIV,
+ WM8510_OPCLKDIV_1 | 4);
+
+ return 0;
+}
+
+
+
+static struct snd_soc_dai_link playpaq_wm8510_dai = {
+ .name = "WM8510",
+ .stream_name = "WM8510 PCM",
+ .cpu_dai = &at32_ssc_dai[0],
+ .codec_dai = &wm8510_dai,
+ .init = playpaq_wm8510_init,
+ .ops = &playpaq_wm8510_ops,
+};
+
+
+
+static struct snd_soc_machine snd_soc_machine_playpaq = {
+ .name = "LRS_PlayPaq_WM8510",
+ .dai_link = &playpaq_wm8510_dai,
+ .num_links = 1,
+};
+
+
+
+static struct wm8510_setup_data playpaq_wm8510_setup = {
+ .i2c_bus = 0,
+ .i2c_address = 0x1a,
+};
+
+
+
+static struct snd_soc_device playpaq_wm8510_snd_devdata = {
+ .machine = &snd_soc_machine_playpaq,
+ .platform = &at32_soc_platform,
+ .codec_dev = &soc_codec_dev_wm8510,
+ .codec_data = &playpaq_wm8510_setup,
+};
+
+static struct platform_device *playpaq_snd_device;
+
+
+static int __init playpaq_asoc_init(void)
+{
+ int ret = 0;
+ struct at32_ssc_info *ssc_p = playpaq_wm8510_dai.cpu_dai->private_data;
+ struct ssc_device *ssc = NULL;
+
+
+ /*
+ * Request SSC device
+ */
+ ssc = ssc_request(0);
+ if (IS_ERR(ssc)) {
+ ret = PTR_ERR(ssc);
+ ssc = NULL;
+ goto err_ssc;
+ }
+ ssc_p->ssc = ssc;
+
+
+ /*
+ * Configure MCLK for WM8510
+ */
+ _gclk0 = clk_get(NULL, "gclk0");
+ if (IS_ERR(_gclk0)) {
+ _gclk0 = NULL;
+ goto err_gclk0;
+ }
+ _pll0 = clk_get(NULL, "pll0");
+ if (IS_ERR(_pll0)) {
+ _pll0 = NULL;
+ goto err_pll0;
+ }
+ if (clk_set_parent(_gclk0, _pll0)) {
+ pr_warning("snd-soc-playpaq: "
+ "Failed to set PLL0 as parent for DAC clock\n");
+ goto err_set_clk;
+ }
+ clk_set_rate(CODEC_CLK, 12000000);
+ clk_enable(CODEC_CLK);
+
+#if defined CONFIG_AT32_ENHANCED_PORTMUX
+ at32_select_periph(MCLK_PIN, MCLK_PERIPH, 0);
+#endif
+
+
+ /*
+ * Create and register platform device
+ */
+ playpaq_snd_device = platform_device_alloc("soc-audio", 0);
+ if (playpaq_snd_device == NULL) {
+ ret = -ENOMEM;
+ goto err_device_alloc;
+ }
+
+ platform_set_drvdata(playpaq_snd_device, &playpaq_wm8510_snd_devdata);
+ playpaq_wm8510_snd_devdata.dev = &playpaq_snd_device->dev;
+
+ ret = platform_device_add(playpaq_snd_device);
+ if (ret) {
+ pr_warning("playpaq_wm8510: platform_device_add failed (%d)\n",
+ ret);
+ goto err_device_add;
+ }
+
+ return 0;
+
+
+err_device_add:
+ if (playpaq_snd_device != NULL) {
+ platform_device_put(playpaq_snd_device);
+ playpaq_snd_device = NULL;
+ }
+err_device_alloc:
+err_set_clk:
+ if (_pll0 != NULL) {
+ clk_put(_pll0);
+ _pll0 = NULL;
+ }
+err_pll0:
+ if (_gclk0 != NULL) {
+ clk_put(_gclk0);
+ _gclk0 = NULL;
+ }
+err_gclk0:
+ if (ssc != NULL) {
+ ssc_free(ssc);
+ ssc = NULL;
+ }
+err_ssc:
+ return ret;
+}
+
+
+static void __exit playpaq_asoc_exit(void)
+{
+ struct at32_ssc_info *ssc_p = playpaq_wm8510_dai.cpu_dai->private_data;
+ struct ssc_device *ssc;
+
+ if (ssc_p != NULL) {
+ ssc = ssc_p->ssc;
+ if (ssc != NULL)
+ ssc_free(ssc);
+ ssc_p->ssc = NULL;
+ }
+
+ if (_gclk0 != NULL) {
+ clk_put(_gclk0);
+ _gclk0 = NULL;
+ }
+ if (_pll0 != NULL) {
+ clk_put(_pll0);
+ _pll0 = NULL;
+ }
+
+#if defined CONFIG_AT32_ENHANCED_PORTMUX
+ at32_free_pin(MCLK_PIN);
+#endif
+
+ platform_device_unregister(playpaq_snd_device);
+ playpaq_snd_device = NULL;
+}
+
+module_init(playpaq_asoc_init);
+module_exit(playpaq_asoc_exit);
+
+MODULE_AUTHOR("Geoffrey Wossum <gwossum at acm.org>");
+MODULE_DESCRIPTION("ASoC machine driver for LRS PlayPaq");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/atmel/sam9g20_wm8731.c b/sound/soc/atmel/sam9g20_wm8731.c
new file mode 100644
index 0000000..4e191df
--- /dev/null
+++ b/sound/soc/atmel/sam9g20_wm8731.c
@@ -0,0 +1,329 @@
+/*
+ * sam9g20_wm8731 -- SoC audio for AT91SAM9G20-based
+ * ATMEL AT91SAM9G20ek board.
+ *
+ * Copyright (C) 2005 SAN People
+ * Copyright (C) 2008 Atmel
+ *
+ * Authors: Sedji Gaouaou <sedji.gaouaou at atmel.com>
+ *
+ * Based on ati_b1_wm8731.c by:
+ * Frank Mandarino <fmandarino at endrelia.com>
+ * Copyright 2006 Endrelia Technologies Inc.
+ * Based on corgi.c by:
+ * Copyright 2005 Wolfson Microelectronics PLC.
+ * Copyright 2005 Openedhand Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+
+#include <linux/atmel-ssc.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+
+#include <mach/hardware.h>
+#include <mach/gpio.h>
+
+#include "../codecs/wm8731.h"
+#include "atmel-pcm.h"
+#include "atmel_ssc_dai.h"
+
+
+static int at91sam9g20ek_startup(struct snd_pcm_substream *substream)
+{
+ struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream);
+ struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+ int ret;
+
+ /* codec system clock is supplied by PCK0, set to 12MHz */
+ ret = snd_soc_dai_set_sysclk(codec_dai, WM8731_SYSCLK,
+ 12000000, SND_SOC_CLOCK_IN);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static void at91sam9g20ek_shutdown(struct snd_pcm_substream *substream)
+{
+ struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream);
+
+ dev_dbg(rtd->socdev->dev, "shutdown");
+}
+
+static int at91sam9g20ek_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+ struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+ struct atmel_ssc_info *ssc_p = cpu_dai->private_data;
+ struct ssc_device *ssc = ssc_p->ssc;
+ int ret;
+
+ unsigned int rate;
+ int cmr_div, period;
+
+ if (ssc == NULL) {
+ printk(KERN_INFO "at91sam9g20ek_hw_params: ssc is NULL!\n");
+ return -EINVAL;
+ }
+
+ /* set codec DAI configuration */
+ ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S |
+ SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS);
+ if (ret < 0)
+ return ret;
+
+ /* set cpu DAI configuration */
+ ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S |
+ SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS);
+ if (ret < 0)
+ return ret;
+
+ /*
+ * The SSC clock dividers depend on the sample rate. The CMR.DIV
+ * field divides the system master clock MCK to drive the SSC TK
+ * signal which provides the codec BCLK. The TCMR.PERIOD and
+ * RCMR.PERIOD fields further divide the BCLK signal to drive
+ * the SSC TF and RF signals which provide the codec DACLRC and
+ * ADCLRC clocks.
+ *
+ * The dividers were determined through trial and error, where a
+ * CMR.DIV value is chosen such that the resulting BCLK value is
+ * divisible, or almost divisible, by (2 * sample rate), and then
+ * the TCMR.PERIOD or RCMR.PERIOD is BCLK / (2 * sample rate) - 1.
+ */
+ rate = params_rate(params);
+
+ switch (rate) {
+ case 8000:
+ cmr_div = 55; /* BCLK = 133MHz/(2*55) = 1.209MHz */
+ period = 74; /* LRC = BCLK/(2*(74+1)) ~= 8060,6Hz */
+ break;
+ case 11025:
+ cmr_div = 67; /* BCLK = 133MHz/(2*60) = 1.108MHz */
+ period = 45; /* LRC = BCLK/(2*(49+1)) = 11083,3Hz */
+ break;
+ case 16000:
+ cmr_div = 63; /* BCLK = 133MHz/(2*63) = 1.055MHz */
+ period = 32; /* LRC = BCLK/(2*(32+1)) = 15993,2Hz */
+ break;
+ case 22050:
+ cmr_div = 52; /* BCLK = 133MHz/(2*52) = 1.278MHz */
+ period = 28; /* LRC = BCLK/(2*(28+1)) = 22049Hz */
+ break;
+ case 32000:
+ cmr_div = 66; /* BCLK = 133MHz/(2*66) = 1.007MHz */
+ period = 15; /* LRC = BCLK/(2*(15+1)) = 31486,742Hz */
+ break;
+ case 44100:
+ cmr_div = 29; /* BCLK = 133MHz/(2*29) = 2.293MHz */
+ period = 25; /* LRC = BCLK/(2*(25+1)) = 44098Hz */
+ break;
+ case 48000:
+ cmr_div = 33; /* BCLK = 133MHz/(2*33) = 2.015MHz */
+ period = 20; /* LRC = BCLK/(2*(20+1)) = 47979,79Hz */
+ break;
+ case 88200:
+ cmr_div = 29; /* BCLK = 133MHz/(2*29) = 2.293MHz */
+ period = 12; /* LRC = BCLK/(2*(12+1)) = 88196Hz */
+ break;
+ case 96000:
+ cmr_div = 23; /* BCLK = 133MHz/(2*23) = 2.891MHz */
+ period = 14; /* LRC = BCLK/(2*(14+1)) = 96376Hz */
+ break;
+ default:
+ printk(KERN_WARNING "unsupported rate %d"
+ " on at91sam9g20ek board\n", rate);
+ return -EINVAL;
+ }
+
+ /* set the MCK divider for BCLK */
+ ret = snd_soc_dai_set_clkdiv(cpu_dai, ATMEL_SSC_CMR_DIV, cmr_div);
+ if (ret < 0)
+ return ret;
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ /* set the BCLK divider for DACLRC */
+ ret = snd_soc_dai_set_clkdiv(cpu_dai,
+ ATMEL_SSC_TCMR_PERIOD, period);
+ } else {
+ /* set the BCLK divider for ADCLRC */
+ ret = snd_soc_dai_set_clkdiv(cpu_dai,
+ ATMEL_SSC_RCMR_PERIOD, period);
+ }
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static struct snd_soc_ops at91sam9g20ek_ops = {
+ .startup = at91sam9g20ek_startup,
+ .hw_params = at91sam9g20ek_hw_params,
+ .shutdown = at91sam9g20ek_shutdown,
+};
+
+
+static const struct snd_soc_dapm_widget at91sam9g20ek_dapm_widgets[] = {
+ SND_SOC_DAPM_MIC("Int Mic", NULL),
+ SND_SOC_DAPM_SPK("Ext Spk", NULL),
+};
+
+static const struct snd_soc_dapm_route intercon[] = {
+
+ /* speaker connected to LHPOUT */
+ {"Ext Spk", NULL, "LHPOUT"},
+
+ /* mic is connected to Mic Jack, with WM8731 Mic Bias */
+ {"MICIN", NULL, "Mic Bias"},
+ {"Mic Bias", NULL, "Int Mic"},
+};
+
+/*
+ * Logic for a wm8731 as connected on a at91sam9g20ek board.
+ */
+static int at91sam9g20ek_wm8731_init(struct snd_soc_codec *codec)
+{
+ printk(KERN_DEBUG
+ "at91sam9g20ek_wm8731 "
+ ": at91sam9g20ek_wm8731_init() called\n");
+
+ /* Add specific widgets */
+ snd_soc_dapm_new_controls(codec, at91sam9g20ek_dapm_widgets,
+ ARRAY_SIZE(at91sam9g20ek_dapm_widgets));
+ /* Set up specific audio path interconnects */
+ snd_soc_dapm_add_routes(codec, intercon, ARRAY_SIZE(intercon));
+
+ /* not connected */
+ snd_soc_dapm_disable_pin(codec, "RLINEIN");
+ snd_soc_dapm_disable_pin(codec, "LLINEIN");
+
+ /* always connected */
+ snd_soc_dapm_enable_pin(codec, "Int Mic");
+ snd_soc_dapm_enable_pin(codec, "Ext Spk");
+
+ snd_soc_dapm_sync(codec);
+
+ return 0;
+}
+
+static struct snd_soc_dai_link at91sam9g20ek_dai = {
+ .name = "WM8731",
+ .stream_name = "WM8731 PCM",
+ .cpu_dai = &atmel_ssc_dai[0],
+ .codec_dai = &wm8731_dai,
+ .init = at91sam9g20ek_wm8731_init,
+ .ops = &at91sam9g20ek_ops,
+};
+
+static struct snd_soc_machine snd_soc_machine_at91sam9g20ek = {
+ .name = "WM8731",
+ .dai_link = &at91sam9g20ek_dai,
+ .num_links = 1,
+};
+
+static struct wm8731_setup_data at91sam9g20ek_wm8731_setup = {
+ .i2c_bus = 0,
+ .i2c_address = 0x1b,
+};
+
+static struct snd_soc_device at91sam9g20ek_snd_devdata = {
+ .machine = &snd_soc_machine_at91sam9g20ek,
+ .platform = &atmel_soc_platform,
+ .codec_dev = &soc_codec_dev_wm8731,
+ .codec_data = &at91sam9g20ek_wm8731_setup,
+};
+
+static struct platform_device *at91sam9g20ek_snd_device;
+
+static int __init at91sam9g20ek_init(void)
+{
+ struct atmel_ssc_info *ssc_p = at91sam9g20ek_dai.cpu_dai->private_data;
+ struct ssc_device *ssc = NULL;
+ int ret;
+
+ /*
+ * Request SSC device
+ */
+ ssc = ssc_request(0);
+ if (IS_ERR(ssc)) {
+ ret = PTR_ERR(ssc);
+ ssc = NULL;
+ goto err_ssc;
+ }
+ ssc_p->ssc = ssc;
+
+ at91sam9g20ek_snd_device = platform_device_alloc("soc-audio", -1);
+ if (!at91sam9g20ek_snd_device) {
+ printk(KERN_DEBUG
+ "platform device allocation failed\n");
+ ret = -ENOMEM;
+ }
+
+ platform_set_drvdata(at91sam9g20ek_snd_device,
+ &at91sam9g20ek_snd_devdata);
+ at91sam9g20ek_snd_devdata.dev = &at91sam9g20ek_snd_device->dev;
+
+ ret = platform_device_add(at91sam9g20ek_snd_device);
+ if (ret) {
+ printk(KERN_DEBUG
+ "platform device allocation failed\n");
+ platform_device_put(at91sam9g20ek_snd_device);
+ }
+
+ return ret;
+
+err_ssc:
+ return ret;
+}
+
+static void __exit at91sam9g20ek_exit(void)
+{
+ struct atmel_ssc_info *ssc_p = at91sam9g20ek_dai.cpu_dai->private_data;
+ struct ssc_device *ssc;
+
+ if (ssc_p != NULL) {
+ ssc = ssc_p->ssc;
+ if (ssc != NULL)
+ ssc_free(ssc);
+ ssc_p->ssc = NULL;
+ }
+
+ platform_device_unregister(at91sam9g20ek_snd_device);
+ at91sam9g20ek_snd_device = NULL;
+}
+
+module_init(at91sam9g20ek_init);
+module_exit(at91sam9g20ek_exit);
+
+/* Module information */
+MODULE_AUTHOR("Sedji Gaouaou <sedji.gaouaou at atmel.com>");
+MODULE_DESCRIPTION("ALSA SoC AT91SAM9G20EK_WM8731");
+MODULE_LICENSE("GPL");
--
1.5.3.7
--------------030900070503000803070901--
More information about the Alsa-devel
mailing list