[alsa-devel] hda-intel - Add digout to ALC880 F1734 model
lists.mg at googlemail.com
Sun Nov 2 17:02:51 CET 2008
On Sun, Nov 2, 2008 at 12:23, Takashi Iwai <tiwai at suse.de> wrote:
> At Sat, 1 Nov 2008 13:43:25 +0100,
> Michael Gruber wrote:
>> The patch "ALSA: hda - Add infrastructure for dynamic stream allocation"
>> broke the detection of my card. With this patch applied the dmesg output is:
>> [ 3761.464838] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level,
>> low) -> IRQ 16
>> [ 3761.464863] PCI: Setting latency timer of device 0000:00:1b.0 to 64
>> [ 3761.499927] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
>> [ 3761.499945] HDA Intel: probe of 0000:00:1b.0 failed with error -22
> Could you check whether you get any other error messages with
>> When I loaded the module with model=... then it would work only for some
>> models, but not for others. I found out that the ones which worked were the
>> ones with a digout. I added the digout to the F1734 model and now it is
>> working again.
>> I can't test if the digout is really working because I lack the hardware, but
>> when I turn on the IEC958 control in the mixer then red light is emitted from
>> my headphone port.
>> I will attach a patch that adds digout to this model because this seems the
>> right thing to do, but I don't know whether there is something wrong with the
>> aforementioned patch that caused my problem in the first place.
> Yeah, it shouldn't break the existing thing, at least.
[ 261.045920] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level,
low) -> IRQ 16
[ 261.045945] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 261.045949] ALSA
chipset global capabilities = 0x4401
[ 261.076055] ALSA
codec_mask = 0x3
[ 261.079523] ALSA
hda_codec: model 'F1734' is selected for config 1734:107c (FSC F1734)
[ 261.079920] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
[ 261.079933] HDA Intel: probe of 0000:00:1b.0 failed with error -22
That is all.
More information about the Alsa-devel