[alsa-devel] Request for Realtek patch - Nvidia MCP51 HDA / ALC883 (10de:026c) Notebook component

[Björn van der Meer]

Hello Everyone,

I have above component in my laptop and lack the expertise to add it to to 
patch_realtek.c myself. 

I think I have collected all the relevant information if one of the developers 
wants to give it a try.

My Notebook: Medion 98300 (a.k.a. WAM2030)
(Please note: Medion is not an OEM. The board is nVidia based, OEM thought to 
be Wistron. Apparently rarely used sound component?)

Internal speakers
Internal mic - unknown
three jacks: headphone, mic, SPDIF(dual use jack).
Jack Sensing under Windows.
5.1 surround (sounds like the setup should be supported by 3stack-6ch-dig)

lspci:
00:10.1 Audio device [0403]: nVidia Corporation MCP51 High Definition Audio 
[10de:026c] (rev a2)
Subsystem: Wistron Corp. Unknown device [17c0:4079]
Flags: 66MHz, fast devsel, IRQ 20
Memory at c0000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/0 
Enable-
Capabilities: [6c] HyperTransport: MSI Mapping 

hwinfo:
22: PCI 10.1: 0403 Audio device
  [Created at pci.296]
  UDI: /org/freedesktop/Hal/devices/pci_10de_26c
  Unique ID: wRyD.X7XJ3rTjrR3
  SysFS ID: /devices/pci0000:00/0000:00:10.1
  SysFS BusID: 0000:00:10.1
  Hardware Class: sound
  Model: "Wistron MCP51 High Definition Audio"
  Vendor: pci 0x10de "nVidia Corporation"
  Device: pci 0x026c "MCP51 High Definition Audio"
  SubVendor: pci 0x17c0 "Wistron Corp."
  SubDevice: pci 0x4079 
  Revision: 0xa2
  Driver: "HDA Intel"
  Driver Modules: "snd_hda_intel"
  Memory Range: 0xc0000000-0xc0003fff (rw,non-prefetchable)
  IRQ: 20 (195693 events)
  Module Alias: "pci:v000010DEd0000026Csv000017C0sd00004079bc04sc03i00"
  Driver Info #0:
    Driver Status: snd_hda_intel is active
    Driver Activation Cmd: "modprobe snd_hda_intel"
  Config Status: cfg=new, avail=yes, need=no, active=unknown

alsa-info.sh output is at http://pastebin.com/f49962c92.

 

Currently the only thing working is output via the internal speakers. 


Thank you very much, B.


-- 
Björn van der Meer
bvdm at chronovault.net