[alsa-devel] [PATCH] Add initial support of Mitac mioa701 device SoC.

Robert Jarzmik robert.jarzmik at free.fr
Wed Jul 9 20:09:35 CEST 2008


Liam Girdwood <liam.girdwood at wolfsonmicro.com> writes:

> I've committed both to git now. We can upstream when the dependencies
> are committed. Just some minor comments below.
Ah. So, how should I provide the corrections :
 - with another full patch ?
 - a differential patch to the previous one ?

> Fwiw, there is a thermal IRQ on the WM9713 and you may want to use it
> for monitoring this. However it only interrupts at 150C so it may be a
> little high for this purpose.
Well, I compared the temperature to my frying pan. The pan is hotter, so I
assume the heat dissipated raises the temperature to about 70 degrees Celsius.

> This is still pending atm.
No problem, I'm very patient.

> If it depends on mode then have a look at the scenario/use case/mode
> manager for ALSA :-
OK. Will look.

>
> This could be shortened to :-
>
> return rear_amp_power(codec, SND_SOC_DAPM_EVENT_ON(event));
>
Absolutely.

>> +static void mioa701_wm9713_exit(struct snd_soc_card *card)
>> +{
>
> I assume this will never be called in real life phone usage. If it is
> you could optionally shutdown/slow down the AC97 link to save power.
Yes, it's never called, unless build as module, and then it makes sense. I'll
post an update for this.

--
Robert


More information about the Alsa-devel mailing list