[alsa-devel] [PATCH] ASoC drivers for the Freescale MPC8610 SoC

[Jon Smirl]

On 1/2/08, David Gibson <david at gibson.dropbear.id.au> wrote:
> On Wed, Jan 02, 2008 at 12:12:00PM -0500, Jon Smirl wrote:
> > On 1/2/08, Grant Likely <grant.likely at secretlab.ca> wrote:
> > > On 1/2/08, Jon Smirl <jonsmirl at gmail.com> wrote:
> > > > On 1/2/08, Timur Tabi <timur at freescale.com> wrote:
> > > > mpc8610_hpcd is the harder one to load since it doesn't have a device
> > > > tree entry. What you want to do it match on the compatible field of
> > > > the root node.
> > > >
> > > > static struct of_device_id fabric_of_match[] = {
> > > >         {
> > > >                 .compatible     = "fsl,MPC8610HPCD",
> > > >         },
> > > >         {},
> > > > };
> > > >
> > > > But this doesn't work since the root is the device tree isn't passed
> > > > down into the device probe code. (Could this be fixed?)
> > >
> > > The driver can always get the root node.  But better yet, instantiate
> > > the correct fabric device (probably as a platform_device) from the
> > > platform code.  Then the correct fabric driver can probe against it.
> >
> > The meaning of this has finally sunk into my consciousness. The
> > platform code can create a device that isn't bound to a driver. So why
> > not make this an of_platform_device?  This is basically a pseudo
> > device that isn't in the device tree.
> >
> > Alternatively, the best place for this device would be on the ASOC
> > bus, but the ASOC bus hasn't been created when the platform code runs.
> > Maybe I can figure out a place in the platform code to create this
> > device after the ASOC driver has loaded and created the bus. Does the
> > platform code get control back after loading all of the device
> > drivers?
> >
> > In the longer term I'd like to kill platform_bus on powerpc and only
> > use of_platform_bus. Platform_bus seems to be functioning like a
> > catch-all and collecting junk from lots of different platforms.
>
> Not going to happen.  of_platform_bus is not the right solution, and
> in fact we're looking at moving (gradually) away from using
> of_platform_bus, and instead using platform devices (along with the
> device node being available for *any* struct device via the
> arch_sysdata).

I do agree that of_platform_bus should have been derived from
platform_bus, not a separate structure. This is causing problems in
the ASLA code  where they want typed pointers.

In my little test patch, I disabled platform_bus on my MPC5200. This
generated some compiler errors which exposed a bunch of MPC83xxx and
Apple code that was getting compiled into my MPC5200 kernel.  These
were platform bus drivers that weren't properly ifdef'd.

So I guess my objection is more along the lines of getting rid of
driver code inside the arch directory and switching everything to
modules. Then we could periodically turn off platform bus on each
platform and make sure everything still builds.


>
> --
> David Gibson                    | I'll have my music baroque, and my code
> david AT gibson.dropbear.id.au  | minimalist, thank you.  NOT _the_ _other_
>                                 | _way_ _around_!
> http://www.ozlabs.org/~dgibson
>


-- 
Jon Smirl
jonsmirl at gmail.com