[alsa-devel] [PATCH 0/8] ASoC: TWL4030: DAPM implementation for outputs (playback)
peter.ujfalusi at nokia.com
Tue Dec 9 11:07:53 CET 2008
On Tuesday 09 December 2008 11:47:01 ext Mark Brown wrote:
> On Tue, Dec 09, 2008 at 08:51:58AM +0200, Peter Ujfalusi wrote:
> > As I see: when the twl4030_power_down is called from the
> > twl4030_set_bias_level (SND_SOC_BIAS_STANDBY, SND_SOC_BIAS_OFF) it sets
> > the codec to power-off state (CODEC_MODE:CODECPDZ = 0), which effectively
> > turns off the digital filter, analog section, so basically everything.
> > When the CODECPDZ is 0, APGA, DAC, analog output settings have no effect
> > (they are powered off)
> Right, that's what I thought. You'll need to fix this in order to use
> bypass paths since it will turn off the analogue.
Yes, that is true.
My plan is (yes I do have one):
1. Proper (at least as close to) implementation for the playback path(s)
2. Proper capture implementation (DAPM, etc)
3. Adding the bypass routes
4. The driver is kind of feature complete
More information about the Alsa-devel