[alsa-devel] Swissonic TS22PCI / Teratec Phase 22 / driver problems with ice1724

[Manuel Schneider]

Takashi Iwai schrieb, Am 14.08.2008 16:03:

> At Thu, 14 Aug 2008 15:59:06 +0200,
> Manuel Schneider wrote:
>> Takashi Iwai schrieb, Am 14.08.2008 15:47:
>>
>>> Pass model=phase22 module option to snd-ice1724 driver.  Then it
>>> handles the card as if it's phase22.
>> Thanks for this hin. Unfortunately it changes nothing - still kernel 
>> error message, still no usable sound device.
> 
> Are you sure?  With the proper model name, at least you won't get
> EEPROM version error any more.




yes, pretty sure. I just reverted my patch and recompiled the driver to
check it out:

ice1712: cannot initialize pro ac97, skipped
ice1724: No matching model found for ID 0x3b157b11
ice1724: Invalid EEPROM version 0
AC'97 0 does not respond - RESET
AC'97 0 access is not valid [0xffffffff], removing mixer.
ice1712: cannot initialize pro ac97, skipped


>> I also tried the following kernel patch, which gives me an accessible 
>> sound device and usable mixer (and no kernel error), but recording does 
>> not work (just noise).
> 
> Likely an incompatible hardware design for the recording...



I guess it's another firmware... I can't test playback as I only have
remote access to the server and it is only used for recording
(streaming) but I assume it does also not work.
I admit that this patch was just a hack to try it out.



Manuel
-- 
Kanal Ratte 104,5 MHz
...das Freie Radio im Wiesental

Hauptstrasse 82
79650 Schopfheim

Tel: +49 7622 6692-53
Fax: +49 7622 6692-54