[alsa-devel] [PATCH 2/2] ac97: YMF743 missing controls support

Keita Maehara maehara at debian.org
Tue Sep 18 17:50:54 CEST 2007


From: Keita Maehara <maehara at debian.org>

These patches enable a few YMF743 controls (Tone/3D/IEC958) that won't
be detected with the current version of ALSA.

Signed-off-by: Keita Maehara <maehara at debian.org>

---

The second one contains following changes:

- A chip-specific SPDIF support for YMF743 (It doesn't have AC97
  standard SPDIF registers seen on YMF753).

- The implementation for "IEC958 Playback Source" and "IEC958 Mute"
  are identical to the ones for YMF753. But there is no "IEC958 Output
  Pin" for YMF743.

diff -r 92978f62cc03 pci/ac97/ac97_codec.c
--- a/pci/ac97/ac97_codec.c	Tue Sep 18 00:28:51 2007 +0900
+++ b/pci/ac97/ac97_codec.c	Tue Sep 18 00:29:26 2007 +0900
@@ -176,7 +176,7 @@ static const struct ac97_codec_id snd_ac
 { 0x574d4C09, 0xffffffff, "WM9709",		NULL,		NULL},
 { 0x574d4C12, 0xffffffff, "WM9711,WM9712",	patch_wolfson11, NULL},
 { 0x574d4c13, 0xffffffff, "WM9713,WM9714",	patch_wolfson13, NULL, AC97_DEFAULT_POWER_OFF},
-{ 0x594d4800, 0xffffffff, "YMF743",		NULL,		NULL },
+{ 0x594d4800, 0xffffffff, "YMF743",		patch_yamaha_ymf743,	NULL },
 { 0x594d4802, 0xffffffff, "YMF752",		NULL,		NULL },
 { 0x594d4803, 0xffffffff, "YMF753",		patch_yamaha_ymf753,	NULL },
 { 0x83847600, 0xffffffff, "STAC9700,83,84",	patch_sigmatel_stac9700,	NULL },
@@ -779,6 +779,12 @@ static int snd_ac97_spdif_default_put(st
 		change |= snd_ac97_update_bits_nolock(ac97, AC97_CXR_AUDIO_MISC, 
 						      AC97_CXR_SPDIF_MASK | AC97_CXR_COPYRGT,
 						      v);
+	} else if (ac97->id == AC97_ID_YMF743) {
+		change |= snd_ac97_update_bits_nolock(ac97,
+						      AC97_YMF7X3_DIT_CTRL,
+						      0xff38,
+						      ((val << 4) & 0xff00) |
+						      ((val << 2) & 0x0038));
 	} else {
 		unsigned short extst = snd_ac97_read_cache(ac97, AC97_EXTENDED_STATUS);
 		snd_ac97_update_bits_nolock(ac97, AC97_EXTENDED_STATUS, AC97_EA_SPDIF, 0); /* turn off */
@@ -1375,7 +1381,8 @@ static int snd_ac97_mixer_build(struct s
 			for (idx = 0; idx < 2; idx++) {
 				if ((err = snd_ctl_add(card, kctl = snd_ac97_cnew(&snd_ac97_controls_tone[idx], ac97))) < 0)
 					return err;
-				if (ac97->id == AC97_ID_YMF753) {
+				if (ac97->id == AC97_ID_YMF743 ||
+				    ac97->id == AC97_ID_YMF753) {
 					kctl->private_value &= ~(0xff << 16);
 					kctl->private_value |= 7 << 16;
 				}
diff -r 92978f62cc03 pci/ac97/ac97_id.h
--- a/pci/ac97/ac97_id.h	Tue Sep 18 00:28:51 2007 +0900
+++ b/pci/ac97/ac97_id.h	Tue Sep 18 00:29:26 2007 +0900
@@ -54,6 +54,7 @@
 #define AC97_ID_ALC658		0x414c4780
 #define AC97_ID_ALC658D		0x414c4781
 #define AC97_ID_ALC850		0x414c4790
+#define AC97_ID_YMF743		0x594d4800
 #define AC97_ID_YMF753		0x594d4803
 #define AC97_ID_VT1616		0x49434551
 #define AC97_ID_CM9738		0x434d4941
diff -r 92978f62cc03 pci/ac97/ac97_patch.c
--- a/pci/ac97/ac97_patch.c	Tue Sep 18 00:28:51 2007 +0900
+++ b/pci/ac97/ac97_patch.c	Tue Sep 18 00:29:26 2007 +0900
@@ -204,6 +204,7 @@ static inline int is_shared_micin(struct
 
 
 /* The following snd_ac97_ymf753_... items added by David Shust (dshust at shustring.com) */
+/* Modified for YMF743 by Keita Maehara <maehara at debian.org> */
 
 /* It is possible to indicate to the Yamaha YMF7x3 the type of speakers being used. */
 static int snd_ac97_ymf7x3_info_speaker(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo)
@@ -287,6 +288,63 @@ static int snd_ac97_ymf7x3_spdif_source_
 		return -EINVAL;
 	val = ucontrol->value.enumerated.item[0] << 1;
 	return snd_ac97_update_bits(ac97, AC97_YMF7X3_DIT_CTRL, 0x0002, val);
+}
+
+static int patch_yamaha_ymf7x3_3d(struct snd_ac97 * ac97)
+{
+	struct snd_kcontrol *kctl;
+	int err;
+
+	if ((err = snd_ctl_add(ac97->bus->card, kctl = snd_ac97_cnew(&snd_ac97_controls_3d[0], ac97))) < 0)
+		return err;
+	strcpy(kctl->id.name, "3D Control - Wide");
+	kctl->private_value = AC97_SINGLE_VALUE(AC97_3D_CONTROL, 9, 7, 0);
+	snd_ac97_write_cache(ac97, AC97_3D_CONTROL, 0x0000);
+	if ((err = snd_ctl_add(ac97->bus->card, snd_ac97_cnew(&snd_ac97_ymf7x3_controls_speaker, ac97))) < 0)
+		return err;
+	snd_ac97_write_cache(ac97, AC97_YMF7X3_3D_MODE_SEL, 0x0c00);
+	return 0;
+}
+
+static const struct snd_kcontrol_new snd_ac97_yamaha_ymf743_controls_spdif[3] = {
+	AC97_SINGLE(SNDRV_CTL_NAME_IEC958("",PLAYBACK,SWITCH), AC97_YMF7X3_DIT_CTRL, 0, 1, 0),
+	{
+		.iface	= SNDRV_CTL_ELEM_IFACE_MIXER,
+		.name	= SNDRV_CTL_NAME_IEC958("",PLAYBACK,NONE) "Source",
+		.info	= snd_ac97_ymf7x3_spdif_source_info,
+		.get	= snd_ac97_ymf7x3_spdif_source_get,
+		.put	= snd_ac97_ymf7x3_spdif_source_put,
+	},
+	AC97_SINGLE(SNDRV_CTL_NAME_IEC958("",NONE,NONE) "Mute", AC97_YMF7X3_DIT_CTRL, 2, 1, 1)
+};
+
+static int patch_yamaha_ymf743_build_spdif(struct snd_ac97 * ac97)
+{
+	int err;
+
+	if ((err = patch_build_controls(ac97, &snd_ac97_controls_spdif[0], 3)) < 0)
+		return err;
+	if ((err = patch_build_controls(ac97, snd_ac97_yamaha_ymf743_controls_spdif, ARRAY_SIZE(snd_ac97_yamaha_ymf743_controls_spdif))) < 0)
+		return err;
+	/* set default PCM S/PDIF params */
+	/* PCM audio,no copyright,no preemphasis,PCM coder,original */
+	snd_ac97_write_cache(ac97, AC97_YMF7X3_DIT_CTRL, 0xa201);
+	return 0;
+}
+
+static struct snd_ac97_build_ops patch_yamaha_ymf743_ops = {
+	.build_spdif	= patch_yamaha_ymf743_build_spdif,
+	.build_3d	= patch_yamaha_ymf7x3_3d,
+};
+
+static int patch_yamaha_ymf743(struct snd_ac97 * ac97)
+{
+	ac97->build_ops = &patch_yamaha_ymf743_ops;
+	ac97->caps |= AC97_BC_BASS_TREBLE;
+	ac97->caps |= 0x04 << 10; /* Yamaha 3D enhancement */
+	ac97->rates[AC97_RATES_SPDIF] = SNDRV_PCM_RATE_48000; /* 48k only */
+	ac97->ext_id |= AC97_EI_SPDIF; /* force the detection of spdif */
+	return 0;
 }
 
 /* The AC'97 spec states that the S/PDIF signal is to be output at pin 48.
@@ -347,22 +405,6 @@ static const struct snd_kcontrol_new snd
 	},
 	AC97_SINGLE(SNDRV_CTL_NAME_IEC958("",NONE,NONE) "Mute", AC97_YMF7X3_DIT_CTRL, 2, 1, 1)
 };
-
-static int patch_yamaha_ymf7x3_3d(struct snd_ac97 * ac97)
-{
-	struct snd_kcontrol *kctl;
-	int err;
-
-	if ((err = snd_ctl_add(ac97->bus->card, kctl = snd_ac97_cnew(&snd_ac97_controls_3d[0], ac97))) < 0)
-		return err;
-	strcpy(kctl->id.name, "3D Control - Wide");
-	kctl->private_value = AC97_SINGLE_VALUE(AC97_3D_CONTROL, 9, 7, 0);
-	snd_ac97_write_cache(ac97, AC97_3D_CONTROL, 0x0000);
-	if ((err = snd_ctl_add(ac97->bus->card, snd_ac97_cnew(&snd_ac97_ymf7x3_controls_speaker, ac97))) < 0)
-		return err;
-	snd_ac97_write_cache(ac97, AC97_YMF7X3_3D_MODE_SEL, 0x0c00);
-	return 0;
-}
 
 static int patch_yamaha_ymf753_post_spdif(struct snd_ac97 * ac97)
 {
diff -r 92978f62cc03 pci/ac97/ac97_proc.c
--- a/pci/ac97/ac97_proc.c	Tue Sep 18 00:28:51 2007 +0900
+++ b/pci/ac97/ac97_proc.c	Tue Sep 18 00:29:26 2007 +0900
@@ -236,10 +236,14 @@ static void snd_ac97_proc_read_main(stru
 		val = snd_ac97_read(ac97, AC97_PCM_MIC_ADC_RATE);
 		snd_iprintf(buffer, "PCM MIC ADC      : %iHz\n", val);
 	}
-	if ((ext & AC97_EI_SPDIF) || (ac97->flags & AC97_CS_SPDIF)) {
+	if ((ext & AC97_EI_SPDIF) || (ac97->flags & AC97_CS_SPDIF) ||
+	    (ac97->id == AC97_ID_YMF743)) {
 	        if (ac97->flags & AC97_CS_SPDIF)
 			val = snd_ac97_read(ac97, AC97_CSR_SPDIF);
-		else
+	        else if (ac97->id == AC97_ID_YMF743) {
+			val = snd_ac97_read(ac97, AC97_YMF7X3_DIT_CTRL);
+			val = 0x2000 | (val & 0xff00) >> 4 | (val & 0x38) >> 2;
+		} else
 			val = snd_ac97_read(ac97, AC97_SPDIF);
 
 		snd_iprintf(buffer, "SPDIF Control    :%s%s%s%s Category=0x%x Generation=%i%s%s%s\n",


More information about the Alsa-devel mailing list