[alsa-devel] [PATCH] opti931: additional check for OPL3 device
krzysztof.h1 at gmail.com
Fri Sep 14 16:35:01 CEST 2007
From: Krzysztof Helt <krzysztof.h1 at wp.pl>
This patch adds additional check for OPL3 device. I found that PNP
by the card is 0x380 - 0x38f but the OPL3 device is located at 0x388
device address). The driver checks start of the range (0x380) which is
Signed-off-by: Krzysztof Helt <krzysztof.h1 at wp.pl>
The same problem appears on two cards I have with Opti chipset:
opti931 and opti933.
If someone can test if the opti92x PnP has the same problem I would be grateful.
-------------- next part --------------
A non-text attachment was scrubbed...
Size: 1218 bytes
Desc: not available
Url : http://mailman.alsa-project.org/pipermail/alsa-devel/attachments/20070914/c0076377/attachment.diff
More information about the Alsa-devel