[alsa-devel] ALSA changes in 2.6.23-rc6 for Intel HDA

Maxim Levitsky maximlevitsky at gmail.com
Thu Sep 13 20:36:18 CEST 2007


On Thursday 13 September 2007 20:15:00 Jon Smirl wrote:

those controls are fine:
>         control.2 {
>                 comment.access 'read write'
>                 comment.type INTEGER
>                 comment.count 2
>                 comment.range '0 - 4'
>                 iface MIXER
>                 name 'InMux Capture Volume'
>                 value.0 0
>                 value.1 0
>         }
>         control.3 {
>                 comment.access 'read write'
>                 comment.type INTEGER
>                 comment.count 2
>                 comment.range '0 - 14'
>                 iface MIXER
>                 name 'InVol Capture Volume'
>                 value.0 0
>                 value.1 0
>         }
They control amplification of sound that enters input lines. 0 means just pass it as is
I rarely increase them

this should be enabled, if you want to record from device:
>        control.4 {
>                comment.access 'read write'
>                comment.type BOOLEAN
>                comment.count 2
>                iface MIXER
>                name 'ADCMux Capture Switch'
>                value.0 false
>                value.1 false
>        }


from my expirence (I also own STAC9227 btw), this is normal, and I even set this to 100%
>        control.5 {
>                comment.access 'read write'
>                comment.type INTEGER
>                comment.count 2
>                comment.range '0 - 127'
>                iface MIXER
>                name 'Front Playback Volume'
>                value.0 75
>                value.1 75
>       }


It looks like what you have now, is exactly what I always had
Maybe hardware is capable of louder sound, although I have studied the datasheet, and I havent seen that

Can you tell me exact version of kernel that allowed you to set higher volume,
and can you test whenever you actually can set louder volumes on that kernel, maybe it has a bug

Btw, I have sent quite a lot of patches for this driver, for example, you will have 'Master Volume' control,
and you will be able to record at same time from all three inputs, I added support for analog loopback.
and ADCMux is now called just 'Capture switch'



If you want to try, you can try ALSA 1.0.15rc2

Best regards,
	Maxim Levitsky


More information about the Alsa-devel mailing list