[alsa-devel] Alsa 1.0.13 (and others) does not work on ALC880
acallan.alsa at ugnet.org
Sun May 20 04:49:05 CEST 2007
The Phoenix cME FirstBIOS Pro, Revision V146 1.00.01 on this machine has
very limited options in general. There is not any option for
enabling/disabling the modem (or other devices such as NIC, wireless NIC,
sound, etc.). So I guess I would assume that it is always enabled through
On Sat, 19 May 2007, Takashi Iwai wrote:
> At Sat, 19 May 2007 02:08:14 -0500 (CDT),
> Andrew Callan wrote:
> > I have been without sound using Fedora Core ever since the 2.6.16 or
> > 2.6.17 kernel update (2.6.16 crashed during initialization, so I could not
> > tell whether sound worked or not). It had worked well through the 2.6.15
> > Fedora kernels. I finally sat down tonight to work the problem as hard as
> > I could and happened upon Eric and Tobin's timely exchange.
> > First, simply adding probe_mask=1 to the snd-hda-intel options worked for
> > me as well; I did not end up having to specify a specific model.
> > Second, I too was seeing a LONG hang when trying to do:
> > cat /proc/asound/card0/codec#0
> > but now with the probe_mask=1, I do not see this.
> > If it helps, the alsa-info.sh output for my system is at
> > http://pastebin.ca/496293
> > If it makes any difference, I'm not sure which model I had specified on
> > the modprobe line at the time I captured this output.
> > One thing I do notice is that after adding probe_mask=1, aplay -l does not
> > show the Si3054 Modem which shows up in the alsa-info output.
> > Thanks for the help you gave in the thread with Eric.
> > Andrew
> Interesting. I've seen similar reports that probe_mask helps.
> Do you disable the modem codec on BIOS or is it enabled?
> If this happens even though it's enabled on BIOS, we'd need a
> blacklist of non-working devices, or a more robust probing routine...
> Alsa-devel mailing list
> Alsa-devel at alsa-project.org
More information about the Alsa-devel