[alsa-devel] [PATCH -mm] sound/pci/au88x0/au88x0_a3d.c remove unused code

Manuel Jander manuel.jander at gmail.com
Mon Mar 26 09:10:19 CEST 2007


Hi everybody,

Removing this code, would prevent any chance to somehow experiment
with the HRTF processors of the vortex chips. It is the only
persistent knowledge base of what is known about them. Deleting that
code will erase that knowledge. I just want to make sure you know
that.

Best regards,
Manuel Jander

On 3/25/07, Michal Piotrowski <michal.k.k.piotrowski at gmail.com> wrote:
> This patch is against the latest -mm snapshot.
>
> Regards,
> Michal
>
> --
> Michal K. K. Piotrowski
> LTG - Linux Testers Group (PL)
> (http://www.stardust.webpages.pl/ltg/)
> LTG - Linux Testers Group (EN)
> (http://www.stardust.webpages.pl/linux_testers_group_en/)
>
> Signed-off-by: Michal Piotrowski <michal.k.k.piotrowski at gmail.com>
>
> --- linux-work5/sound/pci/au88x0/au88x0_a3d.c   2007-02-04 19:44:54.000000000 +0100
> +++ linux-work3/sound/pci/au88x0/au88x0_a3d.c   2007-03-25 16:23:46.000000000 +0200
> @@ -44,15 +44,6 @@ a3dsrc_SetTimeConsts(a3dsrc_t * a, short
>                 a3d_addrA(a->slice, a->source, A3D_A_CoeffTrackTC), CTrack);
>  }
>
> -#if 0
> -static void
> -a3dsrc_GetTimeConsts(a3dsrc_t * a, short *HrtfTrack, short *ItdTrack,
> -                    short *GTrack, short *CTrack)
> -{
> -       // stub!
> -}
> -
> -#endif
>  /* Atmospheric absorbtion. */
>
>  static void
> @@ -95,41 +86,6 @@ a3dsrc_SetAtmosState(a3dsrc_t * a, short
>         hwwrite(vortex->mmio, a3d_addrA(a->slice, a->source, A3D_A_y2), y2);
>  }
>
> -#if 0
> -static void
> -a3dsrc_GetAtmosTarget(a3dsrc_t * a, short *aa, short *b, short *c,
> -                     short *d, short *e)
> -{
> -}
> -static void
> -a3dsrc_GetAtmosCurrent(a3dsrc_t * a, short *bb01, short *ab01, short *b2,
> -                      short *aa12, short *ba12)
> -{
> -       vortex_t *vortex = (vortex_t *) (a->vortex);
> -       *aa12 =
> -           hwread(vortex->mmio,
> -                  a3d_addrA(a->slice, a->source, A3D_A_A12Current));
> -       *ba12 =
> -           hwread(vortex->mmio,
> -                  a3d_addrB(a->slice, a->source, A3D_B_A12Current));
> -       *ab01 =
> -           hwread(vortex->mmio,
> -                  a3d_addrA(a->slice, a->source, A3D_A_B01Current));
> -       *bb01 =
> -           hwread(vortex->mmio,
> -                  a3d_addrB(a->slice, a->source, A3D_B_B01Current));
> -       *b2 =
> -           hwread(vortex->mmio,
> -                  a3d_addrA(a->slice, a->source, A3D_A_B2Current));
> -}
> -
> -static void
> -a3dsrc_GetAtmosState(a3dsrc_t * a, short *x1, short *x2, short *y1, short *y2)
> -{
> -
> -}
> -
> -#endif
>  /* HRTF */
>
>  static void
> @@ -180,71 +136,6 @@ static void a3dsrc_SetHrtfOutput(a3dsrc_
>                 a3d_addrA(a->slice, a->source, A3D_A_HrtfOutR), right);
>  }
>
> -#if 0
> -static void a3dsrc_GetHrtfTarget(a3dsrc_t * a, a3d_Hrtf_t aa, a3d_Hrtf_t b)
> -{
> -       vortex_t *vortex = (vortex_t *) (a->vortex);
> -       int i;
> -
> -       for (i = 0; i < HRTF_SZ; i++)
> -               aa[i] =
> -                   hwread(vortex->mmio,
> -                          a3d_addrA(a->slice, a->source,
> -                                    A3D_A_HrtfTarget + (i << 2)));
> -       for (i = 0; i < HRTF_SZ; i++)
> -               b[i] =
> -                   hwread(vortex->mmio,
> -                          a3d_addrB(a->slice, a->source,
> -                                    A3D_B_HrtfTarget + (i << 2)));
> -}
> -
> -static void a3dsrc_GetHrtfCurrent(a3dsrc_t * a, a3d_Hrtf_t aa, a3d_Hrtf_t b)
> -{
> -       vortex_t *vortex = (vortex_t *) (a->vortex);
> -       int i;
> -
> -       for (i = 0; i < HRTF_SZ; i++)
> -               aa[i] =
> -                   hwread(vortex->mmio,
> -                          a3d_addrA(a->slice, a->source,
> -                                    A3D_A_HrtfCurrent + (i << 2)));
> -       for (i = 0; i < HRTF_SZ; i++)
> -               b[i] =
> -                   hwread(vortex->mmio,
> -                          a3d_addrB(a->slice, a->source,
> -                                    A3D_B_HrtfCurrent + (i << 2)));
> -}
> -
> -static void a3dsrc_GetHrtfState(a3dsrc_t * a, a3d_Hrtf_t aa, a3d_Hrtf_t b)
> -{
> -       vortex_t *vortex = (vortex_t *) (a->vortex);
> -       int i;
> -       // FIXME: verify this!
> -       for (i = 0; i < HRTF_SZ; i++)
> -               aa[i] =
> -                   hwread(vortex->mmio,
> -                          a3d_addrA(a->slice, a->source,
> -                                    A3D_A_HrtfDelayLine + (i << 2)));
> -       for (i = 0; i < HRTF_SZ; i++)
> -               b[i] =
> -                   hwread(vortex->mmio,
> -                          a3d_addrB(a->slice, a->source,
> -                                    A3D_B_HrtfDelayLine + (i << 2)));
> -}
> -
> -static void a3dsrc_GetHrtfOutput(a3dsrc_t * a, short *left, short *right)
> -{
> -       vortex_t *vortex = (vortex_t *) (a->vortex);
> -       *left =
> -           hwread(vortex->mmio,
> -                  a3d_addrA(a->slice, a->source, A3D_A_HrtfOutL));
> -       *right =
> -           hwread(vortex->mmio,
> -                  a3d_addrA(a->slice, a->source, A3D_A_HrtfOutR));
> -}
> -
> -#endif
> -
>  /* Interaural Time Difference.
>   * "The other main clue that humans use to locate sounds, is called
>   * Interaural Time Difference (ITD). The differences in distance from
> @@ -297,43 +188,6 @@ static void a3dsrc_SetItdDline(a3dsrc_t
>                                   A3D_A_ITDDelayLine) + (i << 2), dline[i]);
>  }
>
> -#if 0
> -static void a3dsrc_GetItdTarget(a3dsrc_t * a, short *litd, short *ritd)
> -{
> -       vortex_t *vortex = (vortex_t *) (a->vortex);
> -       *ritd =
> -           hwread(vortex->mmio,
> -                  a3d_addrA(a->slice, a->source, A3D_A_ITDTarget));
> -       *litd =
> -           hwread(vortex->mmio,
> -                  a3d_addrB(a->slice, a->source, A3D_B_ITDTarget));
> -}
> -
> -static void a3dsrc_GetItdCurrent(a3dsrc_t * a, short *litd, short *ritd)
> -{
> -       vortex_t *vortex = (vortex_t *) (a->vortex);
> -
> -       *ritd =
> -           hwread(vortex->mmio,
> -                  a3d_addrA(a->slice, a->source, A3D_A_ITDCurrent));
> -       *litd =
> -           hwread(vortex->mmio,
> -                  a3d_addrB(a->slice, a->source, A3D_B_ITDCurrent));
> -}
> -
> -static void a3dsrc_GetItdDline(a3dsrc_t * a, a3d_ItdDline_t dline)
> -{
> -       vortex_t *vortex = (vortex_t *) (a->vortex);
> -       int i;
> -
> -       for (i = 0; i < DLINE_SZ; i++)
> -               dline[i] =
> -                   hwread(vortex->mmio,
> -                          a3d_addrA(a->slice, a->source,
> -                                    A3D_A_ITDDelayLine + (i << 2)));
> -}
> -
> -#endif
>  /* This is may be used for ILD Interaural Level Difference. */
>
>  static void a3dsrc_SetGainTarget(a3dsrc_t * a, short left, short right)
> @@ -352,37 +206,6 @@ static void a3dsrc_SetGainCurrent(a3dsrc
>                 (right << 0x10) | left);
>  }
>
> -#if 0
> -static void a3dsrc_GetGainTarget(a3dsrc_t * a, short *left, short *right)
> -{
> -       vortex_t *vortex = (vortex_t *) (a->vortex);
> -       *right =
> -           hwread(vortex->mmio,
> -                  a3d_addrA(a->slice, a->source, A3D_A_GainTarget));
> -       *left =
> -           hwread(vortex->mmio,
> -                  a3d_addrB(a->slice, a->source, A3D_B_GainTarget));
> -}
> -
> -static void a3dsrc_GetGainCurrent(a3dsrc_t * a, short *left, short *right)
> -{
> -       vortex_t *vortex = (vortex_t *) (a->vortex);
> -       *right =
> -           hwread(vortex->mmio,
> -                  a3d_addrA(a->slice, a->source, A3D_A_GainCurrent));
> -       *left =
> -           hwread(vortex->mmio,
> -                  a3d_addrB(a->slice, a->source, A3D_B_GainCurrent));
> -}
> -
> -/* CA3dIO this func seems to be inlined all over this place. */
> -static void CA3dIO_WriteReg(a3dsrc_t * a, unsigned long addr, short aa, short b)
> -{
> -       vortex_t *vortex = (vortex_t *) (a->vortex);
> -       hwwrite(vortex->mmio, addr, (aa << 0x10) | b);
> -}
> -
> -#endif
>  /* Generic A3D stuff */
>
>  static void a3dsrc_SetA3DSampleRate(a3dsrc_t * a, int sr)
> @@ -422,28 +245,6 @@ static void a3dsrc_SetA3DPointerReg(a3ds
>         hwwrite(vortex->mmio, A3D_SLICE_Pointers + ((a->slice) << 0xd), ptr);
>  }
>
> -#if 0
> -static void a3dsrc_GetA3DSampleRate(a3dsrc_t * a, int *sr)
> -{
> -       vortex_t *vortex = (vortex_t *) (a->vortex);
> -       *sr = ((hwread(vortex->mmio, A3D_SLICE_Control + (a->slice << 0xd))
> -               >> 3) & 0x1f);
> -       //*sr = ((hwread(vortex->mmio, 0x19C38 + (this08<<0xd))>>3)&0x1f);
> -}
> -
> -static void a3dsrc_GetA3DControlReg(a3dsrc_t * a, unsigned long *ctrl)
> -{
> -       vortex_t *vortex = (vortex_t *) (a->vortex);
> -       *ctrl = hwread(vortex->mmio, A3D_SLICE_Control + ((a->slice) << 0xd));
> -}
> -
> -static void a3dsrc_GetA3DPointerReg(a3dsrc_t * a, unsigned long *ptr)
> -{
> -       vortex_t *vortex = (vortex_t *) (a->vortex);
> -       *ptr = hwread(vortex->mmio, A3D_SLICE_Pointers + ((a->slice) << 0xd));
> -}
> -
> -#endif
>  static void a3dsrc_ZeroSliceIO(a3dsrc_t * a)
>  {
>         vortex_t *vortex = (vortex_t *) (a->vortex);
> @@ -528,25 +329,6 @@ static void a3dsrc_ProgramPipe(a3dsrc_t
>         //a3dsrc_SetHrtfTarget(a, A3dHrirSatTest, A3dHrirSatTest);
>  }
>
> -/* VDB = Vortex audio Dataflow Bus */
> -#if 0
> -static void a3dsrc_ClearVDBData(a3dsrc_t * a, unsigned long aa)
> -{
> -       vortex_t *vortex = (vortex_t *) (a->vortex);
> -
> -       // ((aa >> 2) << 8) - (aa >> 2)
> -       hwwrite(vortex->mmio,
> -               a3d_addrS(a->slice, A3D_SLICE_VDBDest) + (a->source << 2), 0);
> -       hwwrite(vortex->mmio,
> -               a3d_addrS(a->slice,
> -                         A3D_SLICE_VDBDest + 4) + (a->source << 2), 0);
> -       /*
> -          hwwrite(vortex->mmio, 0x19c00 + (((aa>>2)*255*4)+aa)*8, 0);
> -          hwwrite(vortex->mmio, 0x19c04 + (((aa>>2)*255*4)+aa)*8, 0);
> -        */
> -}
> -#endif
> -
>  /* A3D HwSource stuff. */
>
>  static void vortex_A3dSourceHw_Initialize(vortex_t * v, int source, int slice)
> @@ -622,7 +404,6 @@ static void vortex_Vort3D_connect(vortex
>         return;
>  #endif
>
> -#if 1
>         /* Alloc Xtalk mixin resources */
>         v->mixxtlk[0] =
>             vortex_adb_checkinout(v, v->fixed_res, en, VORTEX_RESOURCE_MIXIN);
> @@ -638,7 +419,6 @@ static void vortex_Vort3D_connect(vortex
>                     ("vortex: vortex_Vort3D: ERROR: not enough free mixer resources.\n");
>                 return;
>         }
> -#endif
>
>         /* Connect A3D -> XTALK */
>         for (i = 0; i < 4; i++) {
> @@ -646,10 +426,7 @@ static void vortex_Vort3D_connect(vortex
>                 vortex_route(v, en, 0x11, ADB_A3DOUT(i * 2), ADB_XTALKIN(i));
>                 vortex_route(v, en, 0x11, ADB_A3DOUT(i * 2) + 1, ADB_XTALKIN(5 + i));
>         }
> -#if 0
> -       vortex_route(v, en, 0x11, ADB_XTALKOUT(0), ADB_EQIN(2));
> -       vortex_route(v, en, 0x11, ADB_XTALKOUT(1), ADB_EQIN(3));
> -#else
> +
>         /* Connect XTalk -> mixer */
>         vortex_route(v, en, 0x11, ADB_XTALKOUT(0), ADB_MIXIN(v->mixxtlk[0]));
>         vortex_route(v, en, 0x11, ADB_XTALKOUT(1), ADB_MIXIN(v->mixxtlk[1]));
> @@ -671,7 +448,6 @@ static void vortex_Vort3D_connect(vortex
>                                               v->mixxtlk[1],
>                                               en ? MIX_DEFIGAIN : VOL_MIN);
>         }
> -#endif
>  }
>
>  /* Initialize one single A3D source. */
>
>
>


More information about the Alsa-devel mailing list