[alsa-devel] ALC882 on Abit AW9D-MAX

Dan Aloni da-x at monatomic.org
Mon Jul 9 23:20:54 CEST 2007


On Fri, Apr 20, 2007 at 04:28:09PM +0200, Takashi Iwai wrote:
> At Fri, 20 Apr 2007 14:13:18 +0300,
> Dan Aloni wrote:
> > 
> > On Fri, Apr 20, 2007 at 01:00:03PM +0200, Takashi Iwai wrote:
> > > At Fri, 20 Apr 2007 13:49:47 +0300,
> > > Dan Aloni wrote:
> > [...]
> > > > case 4 originally does {1<=3,3<=2,2<=1}, my working fix effectively 
> > > > adds {1<=2,2<=1}, which means we need to do {1<=1,3<=2,2<=3}, or just
> > > > {3<=2,2<=3}.
> > > > 
> > > > Right?
> > > 
> > > Sounds so.  Could you attach the content of /proc/asound/card0/codec#*
> > > file to re-check?
> > 
> > Okay. I got the following output *with* my fix applied:
> 
> Thanks.  Apparently the default pin config values are wrong, so it's a
> BIOS bug.
> 
> I reread the pin-configuration spec and my last patch is correct.  The
> configuration of 7.1 outputs is Front/CLFE/Rear/Side.  So, I committed
> a patch to HG tree.
> 
> Now about your fix.  I think the best way is to override the pin
> default configuration.  The patch below is the fix on the top of the
> latest ALSA HG tree.  Use hg.alsa-project.org since
> hg-mirror.alsa-project.org seems (again) out of sync right now.

The patch works great with 2.6.22.

Thanks.

-- 
Dan Aloni
XIV LTD, http://www.xivstorage.com
da-x (at) monatomic.org, dan (at) xiv.co.il


More information about the Alsa-devel mailing list