[alsa-devel] [Fwd: Re: default setting not fully working with new ALSA device]
tdavis at dsl-only.net
Thu Jul 5 19:30:45 CEST 2007
-------- Forwarded Message --------
From: Peter Matthias <PeterMatthias at web.de>
To: Tobin Davis <tdavis at dsl-only.net>
Subject: Re: [alsa-devel] default setting not fully working with new
Date: Thu, 5 Jul 2007 18:34:08 +0200
The Board is a MSI K9AGM2-FIH, Sockel AM2, ATI RS690G, mATX, PCIe
The script gave following output:
"Your ALSA information is located at http://pastebin.ca/604529"
Other drivers are statically linked in my kernel.
Thank you for your work! In case of any questions, contact me.
Am Mittwoch, 4. Juli 2007 schrieben Sie:
> Could you post the output from
> http://bulletproof.servebeer.com/alsa/scripts/alsa-info.sh ? This
> script will give us more detailed information on what sound chip it is.
> We will also need to know the brand of board, for the driver file.
> On Wed, 2007-07-04 at 16:48 +0200, Peter Matthias wrote:
> > Hello,
> > I have got a 690G board with following lspic -nv output:
> > 01:05.2 0403: 1002:7919
> > Subsystem: 1002:7919
> > Flags: bus master, fast devsel, latency 64, IRQ 19
> > Memory at fe9e8000 (64-bit, non-prefetchable) [size=16K]
> > Capabilities:  Power Management version 2
> > Capabilities:  Message Signalled Interrupts: 64bit+ Queue=0/0
> > Enable-
> > With the default setting, microphone does not work. With module
> > parameter "modprobe -i snd-hda-intel model=6stack-dig" microphone works
> > well. Please add to default setting. It was written in Linux Kernel
> > documentation to report this issue here.
> > Thank you,
> > Peter
> > _______________________________________________
> > Alsa-devel mailing list
> > Alsa-devel at alsa-project.org
> > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Tobin Davis <tdavis at dsl-only.net>
More information about the Alsa-devel