|
|
| Line 1: |
Line 1: |
| − | Hoping to be in the right place,
| |
| − | (if not please advice cpighin@gmail.com)
| |
| | | | |
| − | I'm going to ask for help on letting alsa working with my laptop acer aspire 8530g.
| |
| − |
| |
| − | '''Introduction'''
| |
| − |
| |
| − | My laptop acer '''aspire 8530g''' has '''Windows7''' and '''Ubuntu 10.10''' as OSs.
| |
| − | My problem is that '''recording quality and volume sound are poor'''.
| |
| − | I tried severals ways to solve the issue without relevant results.
| |
| − | Even following options didn't work properly:
| |
| − | - options snd-hda-intel model=acer-aspire-8930g
| |
| − | - options snd-hda-intel model=acer-aspire-6530g
| |
| − | - options snd-hda-intel
| |
| − |
| |
| − | '''System details'''
| |
| − |
| |
| − | root@Aspire-8530:/home/claudio# '''/proc/asound/card*/codec#*'''
| |
| − | bash: /proc/asound/card0/codec#0: '''Permesso negato
| |
| − | '''
| |
| − |
| |
| − | '''lspci -vvnn'''
| |
| − | gave:
| |
| − | BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
| |
| − | PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
| |
| − | Capabilities: [50] Power Management version 3
| |
| − | Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
| |
| − | Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
| |
| − | Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
| |
| − | DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
| |
| − | ExtTag+ RBE+ FLReset-
| |
| − | DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
| |
| − | RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
| |
| − | MaxPayload 128 bytes, MaxReadReq 128 bytes
| |
| − | DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
| |
| − | LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Latency L0 <64ns, L1 <1us
| |
| − | ClockPM- Surprise- LLActRep+ BwNot+
| |
| − | LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
| |
| − | ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
| |
| − | LnkSta: Speed unknown, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt+ ABWMgmt-
| |
| − | SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
| |
| − | Slot #2, PowerLimit 75.000W; Interlock- NoCompl+
| |
| − | SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
| |
| − | Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
| |
| − | SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
| |
| − | Changed: MRL- PresDet+ LinkState+
| |
| − | RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
| |
| − | RootCap: CRSVisible-
| |
| − | RootSta: PME ReqID 0000, PMEStatus- PMEPending-
| |
| − | DevCap2: Completion Timeout: Not Supported, TimeoutDis- ARIFwd-
| |
| − | DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
| |
| − | LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
| |
| − | Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
| |
| − | Compliance De-emphasis: -6dB
| |
| − | LnkSta2: Current De-emphasis Level: -6dB
| |
| − | Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
| |
| − | Address: fee0300c Data: 4159
| |
| − | Capabilities: [b0] Subsystem: Acer Incorporated [ALI] Device [1025:017f]
| |
| − | Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
| |
| − | Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
| |
| − | Capabilities: [110 v1] Virtual Channel
| |
| − | Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
| |
| − | Arb: Fixed- WRR32- WRR64- WRR128-
| |
| − | Ctrl: ArbSelect=Fixed
| |
| − | Status: InProgress-
| |
| − | VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
| |
| − | Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
| |
| − | Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
| |
| − | Status: NegoPending- InProgress-
| |
| − | Kernel driver in use: pcieport
| |
| − | Kernel modules: shpchp
| |
| − |
| |
| − | 00:04.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0) [1022:9604] (prog-if 00 [Normal decode])
| |
| − | Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
| |
| − | Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
| |
| − | Latency: 0, Cache Line Size: 32 bytes
| |
| − | Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
| |
| − | Memory behind bridge: f0200000-f02fffff
| |
| − | Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
| |
| − | BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
| |
| − | PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
| |
| − | Capabilities: [50] Power Management version 3
| |
| − | Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
| |
| − | Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
| |
| − | Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
| |
| − | DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
| |
| − | ExtTag+ RBE+ FLReset-
| |
| − | DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
| |
| − | RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
| |
| − | MaxPayload 128 bytes, MaxReadReq 128 bytes
| |
| − | DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
| |
| − | LnkCap: Port #1, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <64ns, L1 <1us
| |
| − | ClockPM- Surprise- LLActRep+ BwNot+
| |
| − | LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
| |
| − | ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
| |
| − | LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
| |
| − | SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
| |
| − | Slot #4, PowerLimit 25.000W; Interlock- NoCompl+
| |
| − | SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
| |
| − | Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
| |
| − | SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
| |
| − | Changed: MRL- PresDet+ LinkState+
| |
| − | RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
| |
| − | RootCap: CRSVisible-
| |
| − | RootSta: PME ReqID 0000, PMEStatus- PMEPending-
| |
| − | DevCap2: Completion Timeout: Not Supported, TimeoutDis- ARIFwd-
| |
| − | DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
| |
| − | LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
| |
| − | Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
| |
| − | Compliance De-emphasis: -6dB
| |
| − | LnkSta2: Current De-emphasis Level: -6dB
| |
| − | Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
| |
| − | Address: fee0300c Data: 4161
| |
| − | Capabilities: [b0] Subsystem: Acer Incorporated [ALI] Device [1025:017f]
| |
| − | Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
| |
| − | Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
| |
| − | Capabilities: [110 v1] Virtual Channel
| |
| − | Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
| |
| − | Arb: Fixed- WRR32- WRR64- WRR128-
| |
| − | Ctrl: ArbSelect=Fixed
| |
| − | Status: InProgress-
| |
| − | VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
| |
| − | Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
| |
| − | Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
| |
| − | Status: NegoPending- InProgress-
| |
| − | Kernel driver in use: pcieport
| |
| − | Kernel modules: shpchp
| |
| − |
| |
| − | 00:05.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 1) [1022:9605] (prog-if 00 [Normal decode])
| |
| − | Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
| |
| − | Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
| |
| − | Latency: 0, Cache Line Size: 32 bytes
| |
| − | Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
| |
| − | Memory behind bridge: f0300000-f03fffff
| |
| − | Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
| |
| − | BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
| |
| − | PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
| |
| − | Capabilities: [50] Power Management version 3
| |
| − | Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
| |
| − | Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
| |
| − | Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
| |
| − | DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
| |
| − | ExtTag+ RBE+ FLReset-
| |
| − | DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
| |
| − | RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
| |
| − | MaxPayload 128 bytes, MaxReadReq 128 bytes
| |
| − | DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
| |
| − | LnkCap: Port #2, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <64ns, L1 <1us
| |
| − | ClockPM- Surprise- LLActRep+ BwNot+
| |
| − | LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
| |
| − | ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
| |
| − | LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
| |
| − | SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
| |
| − | Slot #5, PowerLimit 25.000W; Interlock- NoCompl+
| |
| − | SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
| |
| − | Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
| |
| − | SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
| |
| − | Changed: MRL- PresDet+ LinkState+
| |
| − | RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
| |
| − | RootCap: CRSVisible-
| |
| − | RootSta: PME ReqID 0000, PMEStatus- PMEPending-
| |
| − | DevCap2: Completion Timeout: Not Supported, TimeoutDis- ARIFwd-
| |
| − | DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
| |
| − | LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
| |
| − | Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
| |
| − | Compliance De-emphasis: -6dB
| |
| − | LnkSta2: Current De-emphasis Level: -6dB
| |
| − | Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
| |
| − | Address: fee0300c Data: 4169
| |
| − | Capabilities: [b0] Subsystem: Acer Incorporated [ALI] Device [1025:017f]
| |
| − | Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
| |
| − | Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
| |
| − | Capabilities: [110 v1] Virtual Channel
| |
| − | Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
| |
| − | Arb: Fixed- WRR32- WRR64- WRR128-
| |
| − | Ctrl: ArbSelect=Fixed
| |
| − | Status: InProgress-
| |
| − | VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
| |
| − | Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
| |
| − | Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
| |
| − | Status: NegoPending- InProgress-
| |
| − | Kernel driver in use: pcieport
| |
| − | Kernel modules: shpchp
| |
| − |
| |
| − | 00:07.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 3) [1022:9607] (prog-if 00 [Normal decode])
| |
| − | Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
| |
| − | Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
| |
| − | Latency: 0, Cache Line Size: 32 bytes
| |
| − | Bus: primary=00, secondary=09, subordinate=0b, sec-latency=0
| |
| − | I/O behind bridge: 00002000-00002fff
| |
| − | Memory behind bridge: a8000000-a81fffff
| |
| − | Prefetchable memory behind bridge: 00000000a8200000-00000000a83fffff
| |
| − | Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
| |
| − | BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
| |
| − | PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
| |
| − | Capabilities: [50] Power Management version 3
| |
| − | Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
| |
| − | Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
| |
| − | Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
| |
| − | DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
| |
| − | ExtTag+ RBE+ FLReset-
| |
| − | DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
| |
| − | RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
| |
| − | MaxPayload 128 bytes, MaxReadReq 128 bytes
| |
| − | DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
| |
| − | LnkCap: Port #247, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <64ns, L1 <1us
| |
| − | ClockPM- Surprise- LLActRep+ BwNot+
| |
| − | LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
| |
| − | ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
| |
| − | LnkSta: Speed unknown, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
| |
| − | SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
| |
| − | Slot #7, PowerLimit 25.000W; Interlock- NoCompl+
| |
| − | SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
| |
| − | Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
| |
| − | SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
| |
| − | Changed: MRL- PresDet- LinkState-
| |
| − | RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
| |
| − | RootCap: CRSVisible-
| |
| − | RootSta: PME ReqID 0000, PMEStatus- PMEPending-
| |
| − | DevCap2: Completion Timeout: Not Supported, TimeoutDis- ARIFwd-
| |
| − | DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
| |
| − | LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
| |
| − | Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
| |
| − | Compliance De-emphasis: -6dB
| |
| − | LnkSta2: Current De-emphasis Level: -6dB
| |
| − | Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
| |
| − | Address: fee0300c Data: 4171
| |
| − | Capabilities: [b0] Subsystem: Acer Incorporated [ALI] Device [1025:017f]
| |
| − | Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
| |
| − | Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
| |
| − | Capabilities: [110 v1] Virtual Channel
| |
| − | Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
| |
| − | Arb: Fixed- WRR32- WRR64- WRR128-
| |
| − | Ctrl: ArbSelect=Fixed
| |
| − | Status: InProgress-
| |
| − | VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
| |
| − | Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
| |
| − | Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
| |
| − | Status: NegoPending- InProgress-
| |
| − | Kernel driver in use: pcieport
| |
| − | Kernel modules: shpchp
| |
| − |
| |
| − | 00:11.0 SATA controller [0106]: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode] [1002:4391] (prog-if 01 [AHCI 1.0])
| |
| − | Subsystem: Acer Incorporated [ALI] Device [1025:017f]
| |
| − | Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
| |
| − | Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
| |
| − | Latency: 64
| |
| − | Interrupt: pin A routed to IRQ 22
| |
| − | Region 0: I/O ports at 10a8 [size=8]
| |
| − | Region 1: I/O ports at 10a0 [size=4]
| |
| − | Region 2: I/O ports at 1088 [size=8]
| |
| − | Region 3: I/O ports at 1084 [size=4]
| |
| − | Region 4: I/O ports at 1090 [size=16]
| |
| − | Region 5: Memory at fe9ffc00 (32-bit, non-prefetchable) [size=1K]
| |
| − | Capabilities: [60] Power Management version 2
| |
| − | Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
| |
| − | Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
| |
| − | Capabilities: [70] SATA HBA v1.0 InCfgSpace
| |
| − | Kernel driver in use: ahci
| |
| − | Kernel modules: ahci
| |
| − |
| |
| − | 00:12.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
| |
| − | Subsystem: Acer Incorporated [ALI] Device [1025:017f]
| |
| − | Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
| |
| − | Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
| |
| − | Latency: 64, Cache Line Size: 32 bytes
| |
| − | Interrupt: pin A routed to IRQ 16
| |
| − | Region 0: Memory at f0404000 (32-bit, non-prefetchable) [size=4K]
| |
| − | Kernel driver in use: ohci_hcd
| |
| − |
| |
| − | 00:12.1 USB Controller [0c03]: ATI Technologies Inc SB700 USB OHCI1 Controller [1002:4398] (prog-if 10 [OHCI])
| |
| − | Subsystem: Acer Incorporated [ALI] Device [1025:017f]
| |
| − | Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
| |
| − | Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
| |
| − | Latency: 64, Cache Line Size: 32 bytes
| |
| − | Interrupt: pin A routed to IRQ 16
| |
| − | Region 0: Memory at f0405000 (32-bit, non-prefetchable) [size=4K]
| |
| − | Kernel driver in use: ohci_hcd
| |
| − |
| |
| − | 00:12.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
| |
| − | Subsystem: Acer Incorporated [ALI] Device [1025:017f]
| |
| − | Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
| |
| − | Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
| |
| − | Latency: 64, Cache Line Size: 32 bytes
| |
| − | Interrupt: pin B routed to IRQ 17
| |
| − | Region 0: Memory at f0408000 (32-bit, non-prefetchable) [size=256]
| |
| − | Capabilities: [c0] Power Management version 2
| |
| − | Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
| |
| − | Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
| |
| − | Bridge: PM- B3+
| |
| − | Capabilities: [e4] Debug port: BAR=1 offset=00e0
| |
| − | Kernel driver in use: ehci_hcd
| |
| − |
| |
| − | 00:13.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
| |
| − | Subsystem: Acer Incorporated [ALI] Device [1025:017f]
| |
| − | Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
| |
| − | Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
| |
| − | Latency: 64, Cache Line Size: 32 bytes
| |
| − | Interrupt: pin A routed to IRQ 18
| |
| − | Region 0: Memory at f0406000 (32-bit, non-prefetchable) [size=4K]
| |
| − | Kernel driver in use: ohci_hcd
| |
| − |
| |
| − | 00:13.1 USB Controller [0c03]: ATI Technologies Inc SB700 USB OHCI1 Controller [1002:4398] (prog-if 10 [OHCI])
| |
| − | Subsystem: Acer Incorporated [ALI] Device [1025:017f]
| |
| − | Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
| |
| − | Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
| |
| − | Latency: 64, Cache Line Size: 32 bytes
| |
| − | Interrupt: pin A routed to IRQ 18
| |
| − | Region 0: Memory at f0407000 (32-bit, non-prefetchable) [size=4K]
| |
| − | Kernel driver in use: ohci_hcd
| |
| − |
| |
| − | 00:13.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
| |
| − | Subsystem: Acer Incorporated [ALI] Device [1025:017f]
| |
| − | Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
| |
| − | Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
| |
| − | Latency: 64, Cache Line Size: 32 bytes
| |
| − | Interrupt: pin B routed to IRQ 19
| |
| − | Region 0: Memory at f0408400 (32-bit, non-prefetchable) [size=256]
| |
| − | Capabilities: [c0] Power Management version 2
| |
| − | Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
| |
| − | Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
| |
| − | Bridge: PM- B3+
| |
| − | Capabilities: [e4] Debug port: BAR=1 offset=00e0
| |
| − | Kernel driver in use: ehci_hcd
| |
| − |
| |
| − | 00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 3a)
| |
| − | Subsystem: Acer Incorporated [ALI] Device [1025:017f]
| |
| − | Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
| |
| − | Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
| |
| − | Capabilities: [b0] HyperTransport: MSI Mapping Enable- Fixed+
| |
| − | Kernel driver in use: piix4_smbus
| |
| − | Kernel modules: i2c-piix4
| |
| − |
| |
| − | 00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA) [1002:4383]
| |
| − | Subsystem: Acer Incorporated [ALI] Device [1025:017f]
| |
| − | Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
| |
| − | Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
| |
| − | Latency: 64, Cache Line Size: 32 bytes
| |
| − | Interrupt: pin ? routed to IRQ 16
| |
| − | Region 0: Memory at f0400000 (64-bit, non-prefetchable) [size=16K]
| |
| − | Capabilities: [50] Power Management version 2
| |
| − | Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
| |
| − | Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
| |
| − | Kernel driver in use: HDA Intel
| |
| − | Kernel modules: snd-hda-intel
| |
| − |
| |
| − | 00:14.3 ISA bridge [0601]: ATI Technologies Inc SB700/SB800 LPC host controller [1002:439d]
| |
| − | Subsystem: Acer Incorporated [ALI] Device [1025:017f]
| |
| − | Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
| |
| − | Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
| |
| − | Latency: 0
| |
| − |
| |
| − | 00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] (prog-if 01 [Subtractive decode])
| |
| − | Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
| |
| − | Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
| |
| − | Latency: 64
| |
| − | Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=64
| |
| − | Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
| |
| − | BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
| |
| − | PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
| |
| − |
| |
| − | 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor HyperTransport Configuration [1022:1300] (rev 40)
| |
| − | Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
| |
| − | Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
| |
| − | Capabilities: [80] HyperTransport: Host or Secondary Interface
| |
| − | Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL-
| |
| − | Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b-
| |
| − | Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
| |
| − | Revision ID: 3.00
| |
| − | Link Frequency: [b]
| |
| − | Link Error: <Prot- <Ovfl- <EOC- CTLTm-
| |
| − | Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz+ 1.4GHz- 1.6GHz- Vend-
| |
| − | Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- ExtRS- UCnfE-
| |
| − |
| |
| − | 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor Address Map [1022:1301]
| |
| − | Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
| |
| − | Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
| |
| − |
| |
| − | 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor DRAM Controller [1022:1302]
| |
| − | Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
| |
| − | Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
| |
| − | Kernel modules: amd64_edac_mod
| |
| − |
| |
| − | 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor Miscellaneous Control [1022:1303]
| |
| − | Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
| |
| − | Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
| |
| − | Capabilities: [f0] Secure device <?>
| |
| − | Kernel driver in use: k10temp
| |
| − | Kernel modules: k10temp
| |
| − |
| |
| − | 00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor Link Control [1022:1304]
| |
| − | Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
| |
| − | Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
| |
| − |
| |
| − | 01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RS780M/RS780MN [Radeon HD 3200 Graphics] [1002:9612] (prog-if 00 [VGA controller])
| |
| − | Subsystem: Acer Incorporated [ALI] Device [1025:017d]
| |
| − | Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
| |
| − | Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
| |
| − | Latency: 0, Cache Line Size: 32 bytes
| |
| − | Interrupt: pin A routed to IRQ 18
| |
| − | Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
| |
| − | Region 1: I/O ports at 9000 [size=256]
| |
| − | Region 2: Memory at afdf0000 (32-bit, non-prefetchable) [size=64K]
| |
| − | Region 5: Memory at afe00000 (32-bit, non-prefetchable) [size=1M]
| |
| − | Expansion ROM at <unassigned> [disabled]
| |
| − | Capabilities: [50] Power Management version 3
| |
| − | Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
| |
| − | Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
| |
| − | Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
| |
| − | Address: 0000000000000000 Data: 0000
| |
| − | Kernel driver in use: fglrx_pci
| |
| − | Kernel modules: fglrx, radeon
| |
| − |
| |
| − | 02:00.0 VGA compatible controller [0300]: ATI Technologies Inc Mobility Radeon HD 3650 [1002:9591] (rev ff) (prog-if ff)
| |
| − | !!! Unknown header type 7f
| |
| − | Kernel driver in use: fglrx_pci
| |
| − | Kernel modules: fglrx, radeon
| |
| − |
| |
| − | 02:00.1 Audio device [0403]: ATI Technologies Inc RV635 Audio device [Radeon HD 3600 Series] [1002:aa20] (rev ff) (prog-if ff)
| |
| − | !!! Unknown header type 7f
| |
| − | Kernel driver in use: HDA Intel
| |
| − | Kernel modules: snd-hda-intel
| |
| − |
| |
| − | 03:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5764M Gigabit Ethernet PCIe [14e4:1684] (rev 10)
| |
| − | Subsystem: Acer Incorporated [ALI] Device [1025:013c]
| |
| − | Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
| |
| − | Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
| |
| − | Latency: 0, Cache Line Size: 32 bytes
| |
| − | Interrupt: pin A routed to IRQ 45
| |
| − | Region 0: Memory at f0300000 (64-bit, non-prefetchable) [size=64K]
| |
| − | Capabilities: [48] Power Management version 3
| |
| − | Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
| |
| − | Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME-
| |
| − | Capabilities: [40] Vital Product Data
| |
| − | Product Name: Broadcom NetXtreme Fast Ethernet Controller
| |
| − | Read-only fields:
| |
| − | [PN] Part number: BCM95764m
| |
| − | [EC] Engineering changes: 106679-15
| |
| − | [SN] Serial number: 0123456789
| |
| − | [MN] Manufacture ID: 31 34 65 34
| |
| − | [RV] Reserved: checksum good, 30 byte(s) reserved
| |
| − | Read/write fields:
| |
| − | [YA] Asset tag: XYZ01234567
| |
| − | [RW] Read-write area: 107 byte(s) free
| |
| − | End
| |
| − | Capabilities: [60] Vendor Specific Information: Len=6c <?>
| |
| − | Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
| |
| − | Address: 00000000fee0300c Data: 4189
| |
| − | Capabilities: [cc] Express (v2) Endpoint, MSI 00
| |
| − | DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
| |
| − | ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
| |
| − | DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
| |
| − | RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
| |
| − | MaxPayload 128 bytes, MaxReadReq 4096 bytes
| |
| − | DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
| |
| − | LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <64us
| |
| − | ClockPM+ Surprise- LLActRep- BwNot-
| |
| − | LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
| |
| − | ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
| |
| − | LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
| |
| − | DevCap2: Completion Timeout: Range ABCD, TimeoutDis+
| |
| − | DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
| |
| − | LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
| |
| − | Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
| |
| − | Compliance De-emphasis: -6dB
| |
| − | LnkSta2: Current De-emphasis Level: -6dB
| |
| − | Capabilities: [100 v1] Advanced Error Reporting
| |
| − | UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
| |
| − | UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
| |
| − | UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
| |
| − | CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
| |
| − | CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
| |
| − | AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
| |
| − | Capabilities: [13c v1] Virtual Channel
| |
| − | Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
| |
| − | Arb: Fixed- WRR32- WRR64- WRR128-
| |
| − | Ctrl: ArbSelect=Fixed
| |
| − | Status: InProgress-
| |
| − | VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
| |
| − | Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
| |
| − | Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
| |
| − | Status: NegoPending- InProgress-
| |
| − | Capabilities: [160 v1] Device Serial Number 00-26-2d-ff-fe-5a-09-24
| |
| − | Capabilities: [16c v1] Power Budgeting <?>
| |
| − | Kernel driver in use: tg3
| |
| − | Kernel modules: tg3
| |
| − |
| |
| − | 06:00.0 Network controller [0280]: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) [168c:002a] (rev 01)
| |
| − | Subsystem: Foxconn International, Inc. Device [105b:e006]
| |
| − | Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
| |
| − | Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
| |
| − | Latency: 0, Cache Line Size: 32 bytes
| |
| − | Interrupt: pin A routed to IRQ 16
| |
| − | Region 0: Memory at f0200000 (64-bit, non-prefetchable) [size=64K]
| |
| − | Capabilities: [40] Power Management version 2
| |
| − | Flags: PMEClk- DSI- D1+ D2- AuxCurrent=375mA PME(D0+,D1+,D2-,D3hot+,D3cold-)
| |
| − | Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
| |
| − | Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit-
| |
| − | Address: 00000000 Data: 0000
| |
| − | Capabilities: [60] Express (v1) Legacy Endpoint, MSI 00
| |
| − | DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
| |
| − | ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
| |
| − | DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
| |
| − | RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
| |
| − | MaxPayload 128 bytes, MaxReadReq 512 bytes
| |
| − | DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
| |
| − | LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM unknown, Latency L0 <512ns, L1 <64us
| |
| − | ClockPM- Surprise- LLActRep- BwNot-
| |
| − | LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk+
| |
| − | ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
| |
| − | LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
| |
| − | Capabilities: [90] MSI-X: Enable- Count=1 Masked-
| |
| − | Vector table: BAR=0 offset=00000000
| |
| − | PBA: BAR=0 offset=00000000
| |
| − | Capabilities: [100 v1] Advanced Error Reporting
| |
| − | UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
| |
| − | UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
| |
| − | UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
| |
| − | CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
| |
| − | CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
| |
| − | AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
| |
| − | Capabilities: [140 v1] Virtual Channel
| |
| − | Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
| |
| − | Arb: Fixed- WRR32- WRR64- WRR128-
| |
| − | Ctrl: ArbSelect=Fixed
| |
| − | Status: InProgress-
| |
| − | VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
| |
| − | Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
| |
| − | Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
| |
| − | Status: NegoPending- InProgress-
| |
| − | Capabilities: [160 v1] Device Serial Number 00-00-00-00-00-00-00-00
| |
| − | Kernel driver in use: ath9k
| |
| − | Kernel modules: ath9k
| |
| − |
| |
| − | root@Aspire-8530:/home/claudio# '''alsa-info.sh --no-upload option'''
| |
| − | alsa-info.sh: '''comando non trovato'''
| |
| − |
| |
| − | '''Other information'''
| |
| − |
| |
| − | It may be useful knowing that:
| |
| − | - command "aplay -l" gives:
| |
| − | scheda 0: SB [HDA ATI SB], dispositivo 0: ALC888 Analog [ALC888 Analog]
| |
| − | Sottoperiferiche: 0/1
| |
| − | Sottoperiferica #0: subdevice #0
| |
| − | scheda 0: SB [HDA ATI SB], dispositivo 1: ALC888 Digital [ALC888 Digital]
| |
| − | Sottoperiferiche: 1/1
| |
| − | Sottoperiferica #0: subdevice #0
| |
| − | scheda 1: HDMI [HDA ATI HDMI], dispositivo 3: ATI HDMI [ATI HDMI]
| |
| − | Sottoperiferiche: 1/1
| |
| − | Sottoperiferica #0: subdevice #0
| |
| − | - in the Audio Panel I found two devices as follow:
| |
| − | Audio Interno analogico
| |
| − | RV635 Audio Device (Radeo HD 3600 Series) Digital Stereo (HDMI)
| |
| − |
| |
| − | Regards
| |
